Borrow a couple of changes from ES/SR template commit c9684a098f3a, which
clarify manual-results and add one UEFI Shell dmem command.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Update the instructions to test for authenticated capsule update, and add a
test for "on disk".

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Add one command to the U-Boot sniff test to query the actual UEFI variables
storage size.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

As we add automated tests on capsule binaries it is important to get the
capsule binaries location right.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Update the documentation to match what the ACS-IR 2.0 BET-0 actually
produces.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

IR 1.1 certifications should use the ir1 branch so that development can
continue on the main branch.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Add the commands to insert the kernel module and run the BSA tests under
Linux.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Borrow from the ES band and ask for the os-release contents.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Regroup all the UEFI commands related to capsule update in the same
fw/capsule-update.log.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

While at it, remove the mismatched directories and files counts from the
example directory tree.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

- Add a U-Boot command to show the ESRT.

- Refine the OS command to properly capture the `/sys/firmware' folder, as
  capturing with tar leads to corrupt fdt. While at it, add the root shell
  prompt.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

A few results to be collected manually are already collected by the ACS-IR.
Remove them from the README.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

For SystemReady IR certification, uefi-sniff and capsule-update logs
are required to be provided in the fw folder, so these were specified in
the IR results template.

Signed-off-by: Rebecca Pack <Rebecca.Pack@arm.com>

To reduce confusion, we have split our repositories in two: one for the IR
band and one for the ES & SR bands. Start to tailor this repository for the
IR band.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

The default output of the edk2 test parser is called `result.md'.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

Signed-off-by: Grant Likely <grant.likely@arm.com>

The output of the parser script is useful for initial evaluation. Ask
for it to be included.

Signed-off-by: Grant Likely <grant.likely@arm.com>

Rename the output directory to match exactly the same name created by
the ACS IR in the results filesystem

Signed-off-by: Grant Likely <grant.likely@arm.com>

Finish conversion from .txt to .md formatting so that the README file
appears correctly when viewed on GitHub

Signed-off-by: Grant Likely <grant.likely@arm.com>

Simplify the directory tree so that ACS results get copied into a top
level folder and is easier to find. Remove the remaining /acs/*
directories like `fwts` and `sct` to avoid confusion about where results
need to go. Instead create an empty top level /manual-results/ tree
which is where manual test results should be placed, but don't
pre-populate the directories because in most cases this is not needed
and instructions are covered in the README.

Also update the README to reflect the new guidance and to list
directories with a trailing '/' so that they are recognized as
directories and not files.

Signed-off-by: Grant Likely <grant.likely@arm.com>

Clarify the instructions for recording test results and tidy formatting.

Signed-off-by: Grant Likely <grant.likely@arm.com>

Signed-off-by: Grant Likely <grant.likely@arm.com>