madplay was failing to build with errors such as :

audio_alsa.o: In function `config':
audio_alsa.c:(.text+0x200): undefined reference to `snd_pcm_hw_params_set_rate_near@ALSA_0.9'
audio_alsa.c:(.text+0x25c): undefined reference to `snd_pcm_hw_params_set_buffer_time_near@ALSA_0.9'
audio_alsa.c:(.text+0x284): undefined reference to `snd_pcm_hw_params_get_buffer_size@ALSA_0.9'
audio_alsa.c:(.text+0x2a4): undefined reference to `snd_pcm_hw_params_set_period_time_near@ALSA_0.9'
audio_alsa.c:(.text+0x2d4): undefined reference to `snd_pcm_hw_params_get_period_size@ALSA_0.9'

The ALSA library uses symbol versioning by default, to handle ABI
changes. However, since uClibc doesn't seem to support symbol
versioning, we disable this when building the ALSA library by passing
--without-versioned.

However, madplay relies on the old ALSA ABI, so even without symbol
versioning, references to versioned symbols are generated (functions
with the same name, but different API, exist in the old and new API).

The easiest solution is to switch madplay to the new API. This is done
thanks to a patch written by Micha Nelissen <micha@neli.hopto.org> and
available at http://article.gmane.org/gmane.comp.audio.mad.devel/729

.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This module got disabled when pango was upgraded to 1.19.3. But now,
the module builds fine. And even more: disabling it breaks the build
when modules are compiled statically into pango.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The gtk-doc.m4 file is now installed globally (see the automake
package), so there's no point in including a pango-specific patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This package depends on openmotif, which has been removed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This is an old package. It is currently broken, and probably nobody
uses it. So let's get rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This fixes the following build failure:

checking lex output file root...
configure: error: cannot find output from flex; giving up

Caused by the fact that a host version of flex is missing
in $(HOST_DIR).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Bump all the linux kernel version to the latest available and add a
help note for all of them with the release data and status.

The long-term stable 2.6.27 kernel is really out of date (.27 -> .45).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Francisco Gonzalez Morell <gzmorell@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Probing the kernel version uses command substitution to capture the
result of a make command. If the top-level make is run with -C, the
sub-make will print entering/leaving directory messages, mucking up the
output we're trying to capture.

Invoke the sub-make with --no-print-directory so we get clean output.

Signed-off-by: Cameron Hutchison <cam@camh.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

In uClibc, NPTL support does not exist in the 0.9.30 branch, that we
are using in Buildroot. It is only available in the uClibc daily
snapshot, extracted from uClibc master branch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

In Config.in lsattr/chattr and e2label/e2undo are mixed up.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Thanks to Thomas for doing this work.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

In Config.in lsattr/chattr and e2label/e2undo are mixed up.

In uClibc, NPTL support does not exist in the 0.9.30 branch, that we
are using in Buildroot. It is only available in the uClibc daily
snapshot, extracted from uClibc master branch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

I could have created a !dependency on !BR2_PTHREADS_OLD, but that
wouldn't work with external toolchains. So, let's just add a notice in
the help message of WebKit.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The mplayer configure script was failing with:

  Checking for iconv program ... no
  No working iconv program found, use
  --charset=UTF-8 to continue anyway.
  If you also have problems with iconv library functions use --charset=noconv.
  Messages in the GTK-2 interface will be broken then.

Therefore, we pass --charset=UTF-8 instead of --charset=US-ASCII.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

--without-html-dir doesn't work. It leads libsoup ./configure script
to think that HTML_DIR is "no", which leads to the installation of the
documentation in $(STAGING_DIR)no (yes, with the "no" suffix at the
end). The issue is that --with-html-dir is not an enable/disable type
of option, it's an option that only allows to pass a PATH for
documentation installation.

As we don't want the documentation to be installed in this odd
$(STAGING_DIR)no directory, we simply get rid of this option.

See 7e62e8ec for another instance of
the same problem.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This patch fixes different problems:

 * The autogen script of Webkit did not find autoconf, automake and
   aclocal since they are not installed in the host, but in
   $(HOST_DIR). Therefore we pass HOST_CONFIGURE_OPTS to autogen.sh so
   that the PATH is correct.

 * The autogen script was complaining that gtk-doc.make could not be
   find. As compiling gtk-doc completely is a pain (depends on
   Docbook), we just include gtk-doc.make into package/webkit/, and
   copy it to the source directory.

 * The autogen script was complaining about macros used in
   gtk-doc.make that did not exist. This is because aclocal was not
   run with $(STAGING_DIR)/usr/share/aclocal/ in the include
   path. Therefore, we fix ACLOCAL_FLAGS of Webkit's autogen script
   before running it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Make sure that we touch the target so that the target is newer than
the .compiled stamp file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

After being copied to target/, touch dmsetup so that its date is newer
than the .built stamp file in lvm2 source directory. This prevents
make from re-installing dmsetup every time.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Adding real targets to $(TARGETS) doesn't work, since they are
prefixed __real_tgt by the main Makefile. 'make' then always thinks
that these targets aren't up-to-date, and re-generate them every time.

Therefore, we switch dosfstools to the more common way of handling
packages, with a phony target added to $(TARGETS), this phony target
depending on real targets.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Real targets should not depend on phony targets, otherwise they get
rebuilt everytime.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Real targets should not depend on phony targets, otherwise they get
rebuilt every time.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

matchbox-desktop fails to build because it tries to read
/usr/lib/libxcb.la, which doesn't exist on a very basic system with no
development files instead. The buildroot-libtool.patch must therefore
be applied.

Unfortunately, matchbox doesn't yet use the autotools infrastructure,
so we have to manually apply the patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

At install stage, iw needs pkg-config, through the PKG_CONFIG
environment variable.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

For some reason, our imagemagick.mk file calls libtool, but assumes
that libtool is available on the host, which may not be
true. Therefore, we use ImageMagick's internal libtool, which has been
used for compiling/linking all the rest of ImageMagic anyway.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imagemagick configure script wants to run programs to detect the
file_offset_bits, but fails since it is running cross-compile
mode. Therefore, we help the configure script by passing the
appropriate ac_cv variable.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

When installing shared-mime-info on the target, we runn
update-mime-database, which has been built previously by building and
installing shared-mime-info for the host. However, for
update-mime-database (host version) to run properly, we must pass the
appropriate LD_LIBRARY_PATH variable.

We re-use the existing $(HOST_MAKE_ENV) variable to pass all the
appropriate variables.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gob2 for the target needs both flex on the host (for running the flex
program at compile time) and flex on the target (so that it can link
against libfl.a).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Flex contains a libfl.a directory, which programs for the target might
link against. Therefore, we need to install flex to the staging
directory. An example of such a program is gob2, which needs the
yywrap() function, which is implemented by libfl.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>