meta-arm has removed support for EOL N1SDP on master:
https://git.yoctoproject.org/meta-arm/commit/ci?id=6db139e1fd7b724c7a5caacb07a4151411be877f



Therefore remove the platform from meta-cassini-bsp,
update the CI files and documentation.

Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>

Anusmita Dutta Mazumder authored Jul 02, 2024 and Vikas Katariya committed Jul 03, 2024

Due to changes in oe-core setting S to WORKDIR is no longer supported
When referenced in recipes, migrate from WORKDIR to UNPACKDIR
UNPACKDIR is set when required

See guidance here:
https://lists.openembedded.org/g/openembedded-architecture/message/2007



Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>
Signed-off-by: Anusmita Dutta Mazumder <anusmita.duttamazumder@arm.com>

The Corstone-1000 software link needs to point to a release
version instead of `latest`, as it relevant to particular release.

Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>

Since Corstone-1000 points all the required documentation,
We do not need to point to a N1SDP documentation link.

Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>

The rendering of url does not happen due to missing syntax
for Corstone-1000 software stack.

Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>

Adds protobuf interface to se-proxy-sp as the main crypto-sp uses it and
parsec service 1.4 also switch using protobuf interface.

Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Adam Johnston <adam.johnston@arm.com>

The layer check on meta-cassini CI/CD requires maintainer
information to be present.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Move dictionary from qa-checks/cassini-bsp-dictionary to .dictionary
to align with meta-cassini and tidy up the repository structure.

Changelog: other
Signed-off-by: Adam Johnston <adam.johnston@arm.com>

The platform documentation will not be built here. It is intended that,
when building the documentation for meta-cassini, the build process will
fetch or otherwise link-to the sources maintained here, rather than
maintaining platform documentation in meta-cassini.

The build changes to meta-cassini will be done later - for now we just
copy the sources here.

Changelog: other
Signed-off-by: Adam Johnston <adam.johnston@arm.com>

The platform documentation will not be built here. It is intended that,
when building the documentation for meta-cassini, the build process will
fetch or otherwise link-to the sources maintained here, rather than
maintaining platform documentation in meta-cassini.

The build changes to meta-cassini will be done later - for now we just
copy the sources here.

Changelog: other
Signed-off-by: Adam Johnston <adam.johnston@arm.com>

Add `Neoverse N1 System Development Platform` to list of supported
platforms.

Signed-off-by: Adam Johnston <adam.johnston@arm.com>

Add `Corstone-1000 FVP` and `Corstone-1000 for MPS3 to list of supported
platforms.

Signed-off-by: Adam Johnston <adam.johnston@arm.com>

Before slicing this repository from meta-cassini, the LICENSE and README
were provided by the parent folder (the root of meta-cassini)

Create new LICENSE and README for this repository

Signed-off-by: Adam Johnston <adam.johnston@arm.com>

Emekcan Aras authored Apr 26, 2024 and Ali Ozaslan committed May 15, 2024

Removes boot order patches since an equivalent patch merged upstream.

Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>

Emekcan Aras authored May 13, 2024 and Ali Ozaslan committed May 15, 2024

The utils image only depends on TF-A and as this is common to all
branches it should be used in place of the master specific firmware
package.

Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>

The grub folder exists in `meta-arm/meta-arm-bsp`
and only relates to Corstone-1000 changes, therefore correct the path.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Remove obsolete file path under build-common rule.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Extend the scope of variables for the trigger job which
creates a child pipeline.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Automatically trigger pipeline for the target branch on meta-cassini.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

* Manual trigger option for meta-cassini pipeline if any different
branch is specified.
* Trigger meta-cassini pipeline with `none` platform if any CI files
have changed on meta-cassini-bsp

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Ali Ozaslan authored Mar 20, 2024 and Adam Johnston committed Mar 28, 2024

The Download Results job is never created because it has only a rule
that only blocks the job and duplicates with the trigger rule.
Duplicating rule for two jobs has been made common. Only when the
trigger-meta-cassini job is created, the download results job is
created.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Ali Ozaslan authored Mar 20, 2024 and Adam Johnston committed Mar 28, 2024

Once the merge request is created, test all meta-cassini-bsp related
platforms and images.
Rearrange rules according to changes in meta-cassini and filter by
relevance to meta-cassini-bsp

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Ali Ozaslan authored Mar 20, 2024 and Adam Johnston committed Mar 28, 2024

Trigger the meta-cassini branch by looking the meta-cassini-bsp
branch to be merged. Due to gitlab restrictions, set the branches
to be triggered as strings.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Adam Johnston <adam.johnston@arm.com>

Previously, the order in which secure partitions were initialized relied
on the order in which they were loaded - however that is undocumented
behavior.

Add boot order property into SP manifests to ensure each partition is
initialized in the correct order i.e before any other partition which
uses it
- block storage before protected storage
- protected storage before crypto

Signed-off-by: Adam Johnston <adam.johnston@arm.com>

The generic recipe for the Block Storage service has been up-streamed to
meta-arm. Remove the version we hold here to avoid collisions.

Signed-off-by: Adam Johnston <adam.johnston@arm.com>

After refactoring in meta-arm, the utility image is no longer generating
a tar.bz2 file as expected. Set IMAGE_FSTYPES to generate a tar.bz2
image only.

Signed-off-by: Adam Johnston <adam.johnston@arm.com>

Update LAYERSERIES_COMPAT prior to creation of `scarthgap` branches.

Changelog: other
Signed-off-by: Adam Johnston <adam.johnston@arm.com>

The utility image always depends on the firmware image.
Explicitly set the dependency so the firmware image is always built
first.

Also, `core-image` provides common definitions for `core-image-*`
recipes. The utility image should derive from `image` rather than
`core-image`

Signed-off-by: Adam Johnston <adam.johnston@arm.com>

The latest version of bmap-tools package has been renamed bmaptool.
Fix the package name in the utility image.

Signed-off-by: Adam Johnston <adam.johnston@arm.com>

Now the upstream Corstone-1000 build support multiconfig natively we can
remove the multiconfig setting here as well as any settings now covered
by the upstream configuration.

Signed-off-by: Drew Reed <Drew.Reed@arm.com>

With the upstream change to the Corstone-1000 flash image name and the
switch to poky we need to adjust the settings we use to fix the build.

Changelog: bug
Signed-off-by: Drew Reed <Drew.Reed@arm.com>

Adam Johnston authored Feb 20, 2024 and Ali Ozaslan committed Mar 01, 2024

CONFIG_AUTOFS4_FS is deprecated and should be replaced by
CONFIG_AUTOFS_FS.

In theory, this is only required for K3s, and K3s is not supported on
Corstone-1000. However, in their current form, the kernel settings are
not split split between K3s and docker.

Update the setting to resolve the warning in the short term.

In the long term this should be refactored so docker and K3s settings
can be specified separately - but that is not a priority now.

Changelog: other
Signed-off-by: Adam Johnston <adam.johnston@arm.com>

Vikas Katariya authored Jan 30, 2024 and Ali Ozaslan committed Mar 01, 2024

Since K3s is not supported for Corstone-1000 and it is been
separated as a cloud-service feature for the Cassini distro in
the meta-cassini repository, which can be included by `k3s.yml`,
the firmware configuration related to this feature doesn't need to be
explicitly removed.

Even if `k3s.yml` is forced to be built with Corstone-1000,
the K3s feature will still be removed, which is defined in
`corstone1000-mps3.yml` on meta-cassini repository.

Further, the `PREFERRED_RPROVIDER` will be set to `no_cloud`
for Corstone-1000.

This relates to the merge request:
https://gitlab.com/Linaro/cassini/meta-cassini/-/merge_requests/199



Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>

The META_CASSINI_PROJECT and META_CASSINI_TARGET_BRANCH variables are
checked to see which ones are empty. However, since these are not
defined variables, they also need a null check.

CI_MERGE_REQUEST_IID only gets a unique value in the merge
request.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

The ID of the project triggered by BSP, is found. BSP pipeline
downloads the artifacts from the collate-result job in the
triggered project.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Static analysis is added.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Rules are related with meta-cassini-bsp, moved from meta-cassini CI
to meta-cassini-bsp CI. The variables passed to control jobs in the
meta-cassini pipeline were edited by these rules.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

Once meta-cassini-bsp resides in its own separate repository, it
need it's own CI to validate changes to the BSP code. gitlab-ci.yml
file is created. In order to verify meta-cassini-bsp,
meta-cassini-bsp pipeline is used to trigger meta-cassini pipeline.
The variables required to run jobs related to meta-cassini-bsp are
passed to the meta-cassini pipeline.

Static analysis is also disabled before passing the variables to the
meta-cassini pipeline because, when triggering the meta-cassini
pipeline from the meta-cassini-bsp pipeline, the meta-cassini code
should not have changed.

Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>

The systemd-conf base recipe already contained a file called
system.conf so by adding the same file in the append recipe we were
overwriting the original and installing 2 copies of the same file into
the image.  The file in the append recipe has now been renamed to avoid
this.

Signed-off-by: Drew Reed <Drew.Reed@arm.com>

ROOTLIBEXECDIR has been deprecated and replaced by LIBEXECDIR.

Update the systemd patch for Corstone-1000 to match

Signed-off-by: Adam Johnston <adam.johnston@arm.com>