Bump version to 3.0.6.
autoreconf is off per default, so no need to specify it.
Use config.cache (fix the incorrect package instead).
Pass ENABLE_DEBUG setting to configure.

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

It speeds up configuration considerably.
  If a package breaks due to wrong cache-entries, then the broken
  other package has to be fixed, not the innocent bystander!

  Put short: There is absolutely _no_ need to ever turn the cache off
  unless you hack on autotools itself and goof.

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pass --disable-ipv6 to autoconfig packages if IPv6 support is turned off

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

hard/softfloat is just one of the many config options, and it only
clutters the filenames.

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

This patch is needed to make e2fsprogs being linked against
SEM_INIT libraries. In this particular case, it causes the
Makefiles to add -lpthread. Without that, all binaries crash
at startup, at least on x86.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Update gst-plugins-base to version 0.10.25. Also add new
config option to enable/disable the Pango font renderer
plug-in.

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

The Makefile.autotools.in defaults are sufficient.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Show Atmel mirrors together with the other mirrors, instead of hiding
them in yet another sub-menu.

At the same time, add an empty line before the Atmel include as noticed
by Hartley Sweeten.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Use of OABI is strongly discouraged since years now.

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Otherwise the targets will always run.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Most of X.org (E.G. libX11) needs WCHAR support, so ensure that
the toplevel BR2_PACKAGE_XORG7 cannot get enabled unless we have
WCHAR support in the toolchain.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Tested-By: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

prevents build failures if modules are enabled and localversion is ""

Signed-off-by: aldot <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

In case that wpa_supplicant is configured with DBus interface,
it calls pkg-config to find the dbus headers and libraries.
Adjust the make environment so that it will use the right
pkg-config search paths.

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Select a specific svn revision (current trunk: r16259) instead of the
latest from the trunk. Simplifies support, mirroring and makes the system
reproducible.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

As discussed earlier on the mailing list. It simplifies code, gives more
sensible error message on typos and makes the defconfigs easier to find
for users.

Furthermore, update documentation to match.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Similar to the normal targets, but only affects the BR2_PACKAGE_* options.
E.G. handy for keeping your current toolchain config while testing
(random) packages.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

get rid of the removed saveconfig/getconfig targets, and instead document
randconfig/defconfig/allyesconfig/allnoconfig.

Furthermore, get rid of the unused tags target.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Fix typo introduced by 1e32e070 (remove dedicated target-headers option).
Noticed by Alexander Clouter <alex@digriz.org.uk>.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Instead, simply only copy headers/static lib if BR2_HAVE_DEVFILES
is enabled.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Ensures that the configure+make steps are not run every time.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Ensures that the hook isn't run every time. Also use the real stamp
file from the host build instead of host-share-mime-info as dependency,
as otherwise the target is always considered out-of-date.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Instead, simply only copy headers/static lib if BR2_HAVE_DEVFILES
is enabled.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Instead, simply only copy headers/static lib if BR2_HAVE_DEVFILES
is enabled.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

And pass proper cflags.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>