- Oct 24, 2022
-
-
Potin Lai authored
1. Move nvme_config.json to meta-facebook layer 2. Update nvme thermal sensor thresholds base as suggested by thermal team. Signed-off-by:Potin Lai <potin.lai@quantatw.com> Change-Id: Ia444afa2a27032c88302e913eb07909f7123c608
-
Potin Lai authored
Add a switch diagnostics script to dump port register via mdio bus. Tested: root@bletchley:~# /usr/libexec/bletchley-switch-diag ======================================== Port 10 (BMC) **************************************** [00]: 0E07 (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07FE (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0001 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0000 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 001B (Debug Counters) ======================================== ======================================== Port 3 (SLED1) **************************************** [00]: 100F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07FD (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0002 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0000 (Debug Counters) ======================================== ======================================== Port 2 (SLED2) **************************************** [00]: 100F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07FB (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0004 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0000 (Debug Counters) ======================================== ======================================== Port 1 (SLED3) **************************************** [00]: 100F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07F7 (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0008 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0000 (Debug Counters) ======================================== ======================================== Port 7 (SLED4) **************************************** [00]: 100F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07EF (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0010 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0000 (Debug Counters) ======================================== ======================================== Port 6 (SLED5) **************************************** [00]: 1D4F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07DF (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0020 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0075 (Debug Counters) ======================================== ======================================== Port 5 (SLED6) **************************************** [00]: 1D4F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07BF (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0040 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0058 (Debug Counters) ======================================== Signed-off-by: -
Potin Lai authored
Because Bletchley does not have IPMI between Bmc & Host, the Host init state will set to Off after Bmc booted. We require an extra service to check and set Host state & Chassis power state to correct state before doing any power action or power policy restore. Signed-off-by: -
Potin Lai authored
In order to add mdio-tools and mdio-netlink package, enable kernel loadable module support. Signed-off-by: -
Potin Lai authored
Update inlet based FSC configuration R06. Signed-off-by: -
Andrew Geissler authored
Konstantin Aladyshev (1): devices: add TPS53679 support Change-Id: I160a96d63981b38407d40ef8cff050f2a407f66e Signed-off-by:Andrew Geissler <openbmcbump-github@yahoo.com>
-
Joel Stanley authored
This includes security and bug fixes from the 6.0.3 stable release. Change-Id: I7f85e1de492e7280ed5da18973274e4a53ca7bea Signed-off-by:Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
Update to the latest ASPEED SDK. No other changes. Change-Id: Icca4fb50e56ef718d31472aa895a81921b2ef94d Signed-off-by:
-
- Oct 21, 2022
-
-
Andrew Geissler authored
Naveen Moses (1): Add serial uart mux interface class Change-Id: Iaa493fc1a04550f28d7b405bd0d5b9fccd84e8cb Signed-off-by: -
Andrew Geissler authored
Ed Tanous (1): Move Ed from maintainer to reviewer Change-Id: Id1d5acbc4a12ede615d7ed900e8649717b26c390 Signed-off-by: -
Andrew Geissler authored
Chau Ly (1): configurations: Add fan and psu sensors for mt_jade Change-Id: I6a5dbc06a026618cb934c2ae5d7820d02335fbe3 Signed-off-by: -
Patrick Williams authored
poky: 3e5faccfaf..95c802b0be: Alexander Kanavin (1): sdk-manual: correct the bitbake target for a unified sysroot build Michael Opdenacker (6): ref-manual/variables.rst: clarify sentence test-manual: fix typo in machine name ref-manual: faq.rst: reorganize into subsections, contents at top migration-guides: use contributor real name manuals: fix misc typos migration-guides: use contributor real name Paul Eggleton (31): migration-general: add section on using buildhistory ref-manual: add DISABLE_STATIC ref-manual: expand documentation on image-buildinfo class ref-manual: add WATCHDOG_TIMEOUT to variable glossary ref-manual: correct default for BUILDHISTORY_COMMIT ref-manual: document new github-releases class ref-manual: add a note to ssh-server-dropbear feature ref-manual: update buildpaths QA check documentation ref-manual: add UBOOT_MKIMAGE_KERNEL_TYPE ref-manual: add DEV_PKG_DEPENDENCY ref-manual: add SDK_TOOLCHAIN_LANGS ref-manual: add pypi class ref-manual: update pypi documentation for CVE_PRODUCT default in 4.1 ref-manual: add CVE_CHECK_SHOW_WARNINGS ref-manual: add FIT_PAD_ALG ref-manual: add CVE_DB_UPDATE_INTERVAL ref-manual: add KERNEL_DEPLOY_DEPEND ref-manual: add MOUNT_BASE variable ref-manual: remove reference to testimage-auto class Update documentation for classes split ref-manual: complementary package installation recommends ref-manual: remove reference to largefile in DISTRO_FEATURES ref-manual: add missing features ref-manual: add serial-autologin-root to IMAGE_FEATURES documentation ref-manual: add previous overlayfs-etc variables ref-manual: add OVERLAYFS_ETC_EXPOSE_LOWER ref-manual: add WIRELESS_DAEMON ref-manual: add section for create-spdx class ref-manual: add overlayfs class variables ref-manual: add OVERLAYFS_QA_SKIP Add 4.1 migration guide & release notes Ross Burton (2): migration-guides: add known issues for 4.1 migration-guides/release-notes-4.1.rst: add more known issues Takayasu Ito (1): release-notes-4.1.rst remove bitbake-layers subcommand argument meta-arm: 13199c55c0..14c7e5b336: Jon Mason (1): CI: track langdale branch Mohamed Omar Asaker (1): arm-bsp/u-boot: corstone1000: support 32bit ffa direct messaging Ross Burton (3): arm-bsp: remove TC0 arm-bsp/scp-firmware: remove TC0 patches arm/fvp-tc0: remove Total Compute 2020 FVP Rui Miguel Silva (2): arm-bsp/optee: add log handler arm-bsp/trusted-services: support for libmetal and openamp Vishnu Banavath (1): arm-bsp/linux: add kernel file search path for N1SDP meta-openembedded: 6529e5f963..8073ec2275: Alex Kiernan (4): conntrack-tools: Upgrade 1.4.6 -> 1.4.7 conntrack-tools: Add PACKAGECONFIGs for build options conntrack-tools: Use canonical shell spacing uriparser: Upgrade 0.9.6 -> 0.9.7 Andreas Müller (1): onboard: remove Changqing Li (1): redis: upgrade 7.0.4 to 7.0.5 Fabio Estevam (2): remmina: Update to 1.4.27 crucible: Add recipe Khem Raj (1): grpc: Update to 1.50.x release Leon Anavi (2): python3-imageio: Upgrade 2.22.1 -> 2.22.2 python3-distro: Upgrade 1.7.0 -> 1.8.0 Markus Volk (2): pipewire: upgrade 0.3.57 -> 0.3.59 wireplumber: upgrade 0.4.11 -> 0.4.12 Peter Kjellerstedt (1): v4l-utils: Support building without NLS Sebastian Suesens (2): md4c: added md4c lib double-conversion: added double-conversion lib Sui Chen (1): Add recipe for Perfetto Thomas Perrot (1): xfce4-settings: upgrade 4.16.2 -> 4.16.3 Ulysse Manceron (1): abseil-cpp: Upgrade to head on 2022-10-14 Wang Mingyu (19): broadcom-bt-firmware: upgrade cppzmq: upgrade 4.8.1 -> 4.9.0 ctags: upgrade 5.9.20221002.0 -> 5.9.20221009.0 debootstrap: upgrade 1.0.127 -> 1.0.128 freerdp: upgrade 2.8.0 -> 2.8.1 gst-editing-services: upgrade 1.20.3 -> 1.20.4 libwacom: upgrade 2.4.0 -> 2.5.0 nbdkit: upgrade 1.33.1 -> 1.33.2 xfstests: upgrade 2022.09.25 -> 2022.10.09 blueman: upgrade 2.3.2 -> 2.3.4 cli11: upgrade 2.2.0 -> 2.3.0 tesseract: upgrade 4.1.3 -> 5.2.0 python3-absl: upgrade 1.2.0 -> 1.3.0 python3-gevent: upgrade 22.8.0 -> 22.10.1 python3-google-api-core: upgrade 2.10.1 -> 2.10.2 python3-google-api-python-client: upgrade 2.62.0 -> 2.64.0 python3-google-auth: upgrade 2.11.1 -> 2.12.0 python3-pymodbus: upgrade 2.5.3 -> 3.0.0 python3-pywbem: upgrade 1.4.1 -> 1.5.0 homalozoa (1): Add condition for libusbgx-examples zhengrq.fnst (5): python3-stevedore: upgrade 4.0.0 -> 4.0.1 yelp: upgrade 42.1 -> 42.2 tio: upgrade 2.0 -> 2.1 python3-zopeinterface: upgrade 5.4.0 -> 5.5.0 unbound: upgrade 1.16.3 -> 1.17.0 meta-raspberrypi: fc5f80a47e..722c51647c: Oliver Lang (1): rpi-base.inc: handle empty/undefined KERNEL_DEVICETREE Signed-off-by:Patrick Williams <patrick@stwcx.xyz> Change-Id: I555ec2b7aca80e0511bf112acd0a045de17fe91b
-
- Oct 19, 2022
-
-
Joel Stanley authored
Witherspoon has a Qemu model called witherspoon-bmc. Change-Id: I086b350182c0deb990b93d88461162181c29e815 Signed-off-by: -
Andrew Geissler authored
Tingting Chen (1): phosphor-ipmi-net: Add sysrq handle in netipmid for ipmitool sol. Change-Id: I7672f9e3a8c86695868036e0f6e09f356c333a06 Signed-off-by: -
Andrew Geissler authored
Ed Tanous (1): Move the location of sensor object manager Willy Tu (2): fix clang-tidy error for overriding destructor cleanup Secure types adarshgrami (1): DCMI Commands: Support Get DCMI Sensor Info Dynamically Change-Id: If093eae12e17fee11ec0364981d7e23e87b8ae46 Signed-off-by: -
Andrew Geissler authored
George Liu (1): Add EnvironmentMetrics schema Gunnar Mills (1): Revert "NetworkProtocol: Support NetworkSuppliedServers property" Nan Zhou (4): pcie: fix Members@odata.count pcie: fixed filpped empty check move config to a subdir use multiple test targets Change-Id: Ief9f75c6ffebf3e26e1ccda83333eb9a39ea15df Signed-off-by: -
Joel Stanley authored
Palmetto has a Qemu model called palmetto-bmc. Tested: bitbake core-image-minimal && runqemu slirp nographic Change-Id: Ieea6bd5805c36a6d18e22e5aa6e18290b8026283 Signed-off-by: -
Joel Stanley authored
Romulus has a Qemu model called romulus-bmc. Change-Id: Iea41fc4fcfdb3cea8e2fb9dc286dfca2f304184f Signed-off-by: -
Thang Tran authored
Update the MAC address via BMC FRU data, the MAC address is based on "Board extra information 1". BMC FRU device is detected based on i2c bus index and address. Tested: 1. Clear environment and then reboot BMC. 2. Wait for BMC to boot complete, check for eth0 to have MAC Address the same value defined in FRU at Board Extra. Signed-off-by:Thang Tran <thuutran@amperecomputing.com> Change-Id: I5d644109143e4d600b92e23e3f1627986e827768
-
- Oct 18, 2022
-
-
Benjamin Fair authored
This package depends on a u-boot environment partition being available, which we don't have on gBMC systems. Signed-off-by:Benjamin Fair <benjaminfair@google.com> Change-Id: I5b875ef05398d79a997106f799b942273e63d84b
-
Joel Stanley authored
$ runqemu nographic slirp We require nographic instead of setting -nographic through QB_OPT_APPEND in order to avoid the serial port being sent to a character device: self.qemu_opt += " -serial mon:vc" We require slirp instead of setting QB_SLIRP_OPT as we are happy with the default spirp options, we just want to enable slirp instead of the other networking options that require root access. Change-Id: I2ad8a8237ad1a0f5fa888991f7f58a6266a58caf Signed-off-by:
-
- Oct 17, 2022
-
-
Kumar Thangavel authored
Added xyz.openbmc_project.Settings.service as a depedent service for ipmid daemon and service to ensure restrictionMode is created or not. TESTED : Built Facebook YosemiteV2 images and loaded on the target hardware. Verified dependent service added and restriction mode enabled. Signed-off-by:Kumar Thangavel <thangavel.k@hcl.com> Change-Id: Ibb9300e440741fa71b2a6693ba2904d641156965
-
Joel Stanley authored
These are not used by most OpenBMC systems. Disabling these modules appears to reduce the squashfs size by 56KB for build of Witherspoon. Change-Id: I6e895639de5e1a1966abe2df9f87b24946ca42b3 Signed-off-by: -
Joel Stanley authored
This includes security and bug fixes from the 6.0.1 and 6.0.2 stable releases. Change-Id: I901f61142628856b843f3849a8896c6ffa9ce7b1 Signed-off-by: -
Andrew Geissler authored
Willy Tu (1): remove potential memory leak with getAllProperties Change-Id: Ic0b01987cb4403361fe388d291671b2dd2d0a658 Signed-off-by: -
Joel Stanley authored
Chin-Ting Kuo (1): spi: aspeed: Fix typo in mode_bits field for AST2600 platform Cédric Le Goater (1): spi: aspeed: Fix window offset of CE1 Jeremy Kerr (1): mctp: prevent double key removal and unref Joel Stanley (1): usb: gadget: aspeed: Fix probe regression Change-Id: Ie7d3829732e3077a1539632129e6fd43bf3e4eb0 Signed-off-by:
-
- Oct 16, 2022
-
-
Andrew Geissler authored
Andrew Jeffery (12): clang-ignore: Remove files that pass formatting tests: core: Format with clang-format utils: capture: Format with clang-format container_of: Format with clang-format alloc: Format with clang-format utils: mctp-in: Format with clang-format utils: mctp-pipe: Format with clang-format utils: mctp-astlpc-daemon: Format with clang-format tests: test-utils: Format with clang-format libmctp-astlpc: Format with clang-format libmctp-serial: Format with clang-format tests: serial: Format with clang-format Change-Id: Ibf51c1e801d68c16b14fe12a6b9bf2c0e2c2b84f Signed-off-by: -
Andrew Geissler authored
Hieu Huynh (1): Fix wrong UUID interface Change-Id: I73e5e6dfc6d8878eb5e569595cc32bb20666d332 Signed-off-by: -
Andrew Geissler authored
Patrick Williams (22): std::execution: import from p2300 prototype async: add coroutine task support async: add context support async: add client-object proxy async: add match event: add a simple wrapper around sd-event async: context: support stopping the context event: add oneshot timer support async: add sleep_for sender async: add scope async: scope: add completion sender async: context: handle shutdown better async: match: stop pending sender on dtor async: handle exceptions and stops async: scope: allow blocks before started test: async: add a few recursive task tests async: context: spawn on worker thread async: context: simplify run function async: context: allow run re-entrance async: context: allow many exceptions test: async: tweak time multiplier docs: move yaml documentation to a subdir Change-Id: Ia1c632552d05a9916145db3b4b76605cac2929a6 Signed-off-by: -
Patrick Williams authored
meta-arm: 0164b4ca7a..13199c55c0: Adam Johnston (1): arm-bsp/linux-yocto: Upgrade kernel to v5.19 for N1SDP Anton Antonov (4): meta-arm/trusted-services: Use GCC toolchain for specific TS recipes only. arm/trusted-services: Remove patches merged upstream arm/trusted-services: Remove remaining patches merged upstream arm/trusted-services: include documentation Davidson K (1): arm-bsp/linux-arm64-ack: make it compatible with gcc-12 for TC Emekcan (2): arm-bsp/linux-yocto: update RPMSG_CTRL config for corstone1000 arm-bsp/kernel: Fix TEE driver bug for corstone1000 Jon Mason (3): CI: trusted services as a feature instead of a machine CI: cleanups for targets and removed tests arm-bsp: zephyr removal Peter Hoyes (1): arm/lib: Do not log FVP return codes < 0 Ross Burton (2): arm/optee-spdevkit: remove CI: restrict compression threading Rui Miguel Silva (1): arm-bsp/corstone1000: bump kernel version to 5.19 Rupinderjit Singh (1): arm: update Android common kernel Satish Kumar (4): arm-bsp/u-boot: corstone1000: esrt support arm-bsp/trusted-firmware-m: corstone1000: bump tfm SHA arm-bsp/trusted-firmware-m: corstone1000: fix sournce dir of libmetal and openamp arm-bsp/trusted-firmware-m: corstone1000: secure debug code checkout from yocto Sumit Garg (2): arm-toolchain: update Arm GCC to 11.3 external-arm-toolchain: Enable 11.3.rel1 support Vishnu Banavath (1): arm-bsp/corstone500: upgrade kernel to v5.19 meta-raspberrypi: 45d56d82b7..fc5f80a47e: Devendra Tewari (3): rpi-cmdline: Leave cma value to kernel default libcamera: Tweak to build for Raspberry Pi rpi-libcamera-apps: add new recipe Martin Jansa (1): lirc: rename bbappend to match 0.10.% Zygmunt Krynicki (2): ci: fix typo: unconditionally ci: fix apparent typo in file patterns meta-openembedded: ce0b93fc12..6529e5f963: Alexander Kanavin (3): python3-cchardet: depend on cython python3-gevent: make compatible with python 3.11 python3-pybluez: add python 3.11 patch Anuj Mittal (1): opencv: fix reproducibility issues Devendra Tewari (2): libcamera: Bump SRCREV and add libyaml to DEPENDS libcamera: Remove boost from DEPENDS Fabio Estevam (1): spice: Include aarch64 to COMPATIBLE_HOST Federico Pellegrin (2): chrony: add pkgconfig class as pkg-config is explicitly searched for chrony: correct parameter to configure to disable readline usage Hao Jiang (1): mctp: install the .target files Jiaqing Zhao (1): openldap: Upgrade 2.5.12 -> 2.5.13 Khem Raj (2): open62541: Disable lto on riscv/clang python3-gevent: Upgrade to 22.8.0 Leon Anavi (10): python3-networkx: Upgrade 2.8.6 -> 2.8.7 python3-coverage: Upgrade 6.4.4 -> 6.5.0 python3-rdflib: Upgrade 6.1.1 -> 6.2.0 python3-tabulate: Upgrade 0.8.10 -> 0.9.0 python3-imageio: Upgrade 2.22.0 -> 2.22.1 python3-astroid: Upgrade 2.12.10 -> 2.12.11 python3-jsonref: Upgrade 0.2 -> 0.3.0 python3-sentry-sdk: Upgrade 1.5.12 -> 1.9.10 python3-greenlet: Upgrade 1.1.3 -> 1.1.3.post0 python3-xmltodict: Upgrade 0.12.0 -> 0.13.0 Markus Volk (2): blueman: upgrade 2.2.4 -> 2.3.2 gtkmm3: upgrade 3.24.5 -> 3.24.7 Martin Jansa (2): re2: fix branch name from master to main jack: fix compatibility with python-3.11 Mathieu Dubois-Briand (3): mbedtls: Fix CVE product name mbedtls: Update to 2.28.1 version mbedtls: Whitelist CVE-2021-43666, CVE-2021-45451 Matthias Klein (1): paho-mqtt-c: upgrade 1.3.10 -> 1.3.11 Michael Opdenacker (1): tio: correct license information Mingli Yu (1): mariadb: not use qemu to run cross-compiled binaries S. Lockwood-Childs (1): x265: support aarch64 Thomas Perrot (1): spitools: remove unused BPV variable Vyacheslav Yurkov (1): opcua: Add new recipe Wang Mingyu (20): ctags: upgrade 5.9.20220925.0 -> 5.9.20221002.0 dnfdragora: upgrade 2.1.2 -> 2.1.3 dool: upgrade 1.0.0 -> 1.1.0 freeglut: upgrade 3.2.1 -> 3.4.0 gspell: upgrade 1.11.1 -> 1.12.0 hwdata: upgrade 0.362 -> 0.363 iperf3: upgrade 3.11 -> 3.12 libnet-dns-perl: upgrade 1.34 -> 1.35 lirc: upgrade 0.10.1 -> 0.10.2 metacity: upgrade 3.44.0 -> 3.46.0 flatbuffers: upgrade 2.0.8 -> 22.9.29 opencl-headers: upgrade 2022.09.23 -> 2022.09.30 php: upgrade 8.1.10 -> 8.1.11 poppler: upgrade 22.09.0 -> 22.10.0 xfstests: upgrade 2022.09.04 -> 2022.09.25 links: upgrade 2.27 -> 2.28 st: upgrade 0.8.5 -> 0.9 python3-requests-toolbelt: upgrade 0.9.1 -> 0.10.0 Add nativesdk-systemd-systemctl as dependency of dnf-plugin-tui dnf-plugin-tui: Add nativesdk Yi Zhao (4): strongswan: upgrade 5.9.7 -> 5.9.8 open-vm-tools: upgrade 11.3.5 -> 12.1.0 dhcp-relay: upgrade 4.4.3 -> 4.4.3-P1 frr: Security fix CVE-2022-37032 zhengrq.fnst (5): python3-protobuf: upgrade 4.21.6 -> 4.21.7 stunnel: upgrade 5.65 -> 5.66 python3-web3: upgrade 5.31.0 -> 5.31.1 wolfssl: upgrade 5.5.0 -> 5.5.1 python3-xmlschema: upgrade 2.1.0 -> 2.1.1 meta-security: 824d2762f6..e8e7318189: Armin Kuster (3): apparmor: update to 3.0.7 libgssglue: update to 0.7 cryptmount: update to 6.0 Michael Haener (1): tpm: update the linux-yocto rule with the one from sanity-meta-tpm class poky: 5200799866..3e5faccfaf: Johan Korsnes (1): migration guides: 3.4: remove spurious space in example Lee Chee Yang (1): migration guides: add release notes for 4.0.4 Michael Opdenacker (35): manuals: improve initramfs details manuals: add references to the "do_fetch" task manuals: add reference to the "do_install" task manuals: add references to the "do_build" task manuals: add reference to "do_configure" task manuals: add reference to the "do_compile" task manuals: add references to the "do_deploy" task manuals: add references to the "do_image" task manuals: add references to the "do_package" task manuals: add references to the "do_package_qa" task overview-manual: concepts.rst: add reference to "do_packagedata" task manuals: add references to the "do_patch" task manuals: add references to "do_package_write_*" tasks ref-manual: variables.rst: add reference to "do_populate_lic" task manuals: add reference to the "do_populate_sdk" task overview-manual: concepts.rst: add reference to "do_populate_sdk_ext" task manuals: add references to "do_populate_sysroot" task manuals: add references to the "do_unpack" task dev-manual: common-tasks.rst: add reference to "do_clean" task manuals: add references to the "do_cleanall" task ref-manual: tasks.rst: add references to the "do_cleansstate" task manuals: add references to the "do_devshell" task dev-manual: common-tasks.rst: add reference to "do_listtasks" task manuals: add references to the "do_bundle_initramfs" task manuals: add references to the "do_rootfs" task ref-manual: tasks.rst: add reference to the "do_kernel_checkout" task manuals: add reference to the "do_kernel_configcheck" task manuals: add references to the "do_kernel_configme" task ref-manual: tasks.rst: add reference to the "do_kernel_metadata" task migration-guides: add reference to the "do_shared_workdir" task ref-manual: tasks.rst: add reference to the "do_validate_branches" task ref-manual: tasks.rst: add reference to the "do_image_complete" task ref-manual: system-requirements: Ubuntu 22.04 now supported overview-manual: concepts.rst: fix formating and add references ref-manual/faq.rst: update references to products built with OE / Yocto Project Signed-off-by:
-
- Oct 14, 2022
-
-
Chanh Nguyen authored
Support Host power control for Mt.Mitchell platform Tested: 1. Verify if Host power ON/OFF/cycle/reset work via IPMI, Redfish and WebUI. Signed-off-by:Chanh Nguyen <chanh@os.amperecomputing.com> Change-Id: Ia397866ac3aef128958d84696209ecab80d16266
-
Chanh Nguyen authored
Add new Mt.Mitchell platform with basic features so that it can be compiled and works. Tested: 1. Compile for Mt.Mitchell successful. 2. Flash and check for the firmware can boot on the Mt.Mitchell non-DC-SCM system without issue Signed-off-by: -
Thang Q. Nguyen authored
Enable IPMI SSIF support for Mt.Jade platform. This also supports to set BMC_OK GPIO when SSIF service starts and unset when SSIF service stops. Tested: 1. Check if ssifbridge.service service starts root@mtjade:~# systemctl status ssifbridge.service | grep Active Active: active (running) since Tue 2022-10-11 02:17:55 UTC; 1h 49min ago 2. From Host OS, check if IPMI SSIF works. Signed-off-by:Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I6b3a764f15c63b45acafdb590c7dfb223bfdd3a3
-
Matt Simmering authored
Update bbappend to enable ignore-soft-resets-during-post option Tested: Feature is now enabled Change-Id: I0fd779e2b3d18804562eab482966aa680ef36c6b Signed-off-by:Matt Simmering <matthew.simmering@intel.com>
-
Brad Bishop authored
The content in this repository has been moved to phosphor-dbus-interfaces, and ibm-dbus-interfaces has been deprecated. Remove the recipe. Signed-off-by:Brad Bishop <bradleyb@fuzziesquirrel.com> Change-Id: I36edf4743ed6a79c610a78eab84926de1d681818
-
Andrew Geissler authored
Harvey.Wu (1): nemora-postd: update add_option function Change-Id: I747d2a1c96d97e3f2279ddaa649461031083bd0c Signed-off-by: -
Andrew Geissler authored
As the pldm code already removed the libpldm code, we are removing that from the recipe as well. Manojkiran Eda (2): Remove libpldm code & add libpldm.wrap Remove libpldm documentation from pldm Change-Id: Icc9ec6e5462c7a3c34405fa01b86f6087e7f8efc Signed-off-by: -
Patrick Williams authored
Potin Lai (1): mtd: spi-nor: winbond: Add support for w25q01jvq Signed-off-by: -
Andrew Geissler authored
Ed Tanous (1): Allow clients to disable coroutine support Change-Id: Ib4b1867ca850ff4b4520acd9d8684f3389a1347d Signed-off-by: -
Patrick Williams authored
A workaround was added in 2019 to handle code updates, which needed to add an avahi user. Assume that this has been applied to all vendor machines by now and can be removed. Tested: Booted Witherspoon in QEMU and observe the avahi user and group are still created correctly. ``` root@witherspoon:~# grep avahi /etc/group /etc/passwd /etc/group:avahi:x:996: /etc/passwd:avahi:x:997:996::/run/avahi-daemon:/bin/false ``` Signed-off-by:
-
