The make targets for the kconfig conf/mconf/qconf are almost identical,
so us a single rule for it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qconf is written in C++, so use HOSTCXX instead of HOSTCC, and pass the
correct flags.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cdrkit unconditionally enables code using rcmd(3), which isn't available
on uClibc.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libidn contains a few elisp files, and it's configure script checks for
emacs to know if it should install them. This is not important for BR as
we don't have emacs, but configure fails if it's available on the host,
config.cache is used and autoconf has already been used as that loads
EMACS="no" into the cache.

Fix it by also setting EMACS="no" here.

At the same time, fix up trailing spaces in Config.in.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Closes #1909

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Xserver installation fails with parallel make jobs.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

This reverts commit b7acacaf.

Closes #1855

We DO need to install into staging for all the xdriver-* packages,
so revert this commit.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Closes #1789

This reverts commit 6b939d40.

The problem this commit tries to fix is valid, but the fix unfortunately
seems to cause worse problems on certain distributions/setups, so revert
for now.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Use the correct CFLAGS from BR and not just the LDFLAGS. This is especially
important for external toolchain setups, but the lockfile-progs buildsystem
also hardcodes -Werror, which breaks the build in certain setups.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Due to recent 3.2.4 release, 3.2.2 download address has changed, so
I prefered bump version to 3.2.4 rather than changing NCFTP_SITE.

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdbserver dlopen(3)s libthread_db.so at runtime, so there is no
dependency on it (does not appear as being (NEEDED)).

Copy libthread_db.so from external toolchain when gdbserver is enbled.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

If threads are disabled, do not try to copy the libpthread.so from the
external library.

It is still expected that the BR configuration matches the external
toolchain setup, and no check is done to enforce that.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Xserver installation fails with parallel make jobs.

Installation to staging is not needed. So just remove it
instead of converting to $(MAKE1).

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

XServer compiles just fine without locale support

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Closes #1843

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

coreutils: add 'join' to the list of files that are copied to target
rootfs.

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

The legacy zImage target for x86 was removed from the kernel in 2.6.30,
and we state in Config.in that we'll use bzImage if BR2_PACKAGE_LINUX_FORMAT
isn't set, so ensure we do so for x86.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Works around issues with non-fPIC libraries.

Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

The configure script contains a buggy test for the bool datatype and
it's size. This is normally not a big deal as the result isn't used
for anything, but when BR2_CONFIG_CACHE (default) is used, the
wrong ac_cv_type_bool result is stored in the cache, and other packages
like libcurl DO need the bool type, so that breaks the build.

Fix it by presetting those tests to sane values.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Make sure alsa-lib is built before gst-plugins-base if enabled, so
configure detects the presence of alsa and builds alsasink/src.

Reported-by: Phil Edworthy <Phil.Edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Fix lfs patch to include <features.h> before checking any of the
uClibc defines.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Valgrind 3.2.3 needs linux/a.out.h, which hasn't been exported on ppc
since 2.6.28.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add ttymxc[0-2] to the list is the /etc/securetty of the Busybox skeleton.
This is useful for serial logins on i.MX based systems. The same serial
devices already appear in the generic "target_skeleton/".

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>