- Apr 10, 2018
-
-
Baruch Siach authored
Drop libssh2 configure test fix; the issue is fixed upstream. Add license file hash. Cc: Carlos Santos <casantos@datacom.ind.br> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-
Baruch Siach authored
We now have tar.xz archive again, use that. Cc: Phil Eichinger <phil.eichinger@gmail.com> Signed-off-by:
-
Baruch Siach authored
Drop upstream patches, renumber the rest. Signed-off-by:
-
Erik Larsson authored
Signed-off-by:
Erik Larsson <karl.erik.larsson@gmail.com> Signed-off-by:
-
Yann E. MORIN authored
In case the git backend gets killed right in-between it finished initialising the repository, but before it could add the remote, we'd end up with a repository without the 'origin' remote, so we would not be able to change its URL. Another case that may happen (like in the build failure, below), is that the repository was initialised with a previous version of Buildroot, before the commit e1771926 (download/git: don't require too-recent git) was applied, and that trepository was still lying around... Fixes: http://autobuild.buildroot.org/results/25a/25aae054634368fadb265b97ebe4dda809deff6f/ Signed-off-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
-
- Apr 09, 2018
-
-
Fabrice Fontaine authored
Remove patch (applied upstream) Signed-off-by:
Fabrice Fontaine <fontaine.fabrice@gmail.com> Signed-off-by:
-
Fabrice Fontaine authored
libglib2 is licensed under LGPL-2.1+ and not LGPL-2.0+ since release 2.53.3 Signed-off-by:
-
Fabrice Fontaine authored
Signed-off-by:
-
Fabrice Fontaine authored
Signed-off-by:
-
Fabio Estevam authored
Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Fabio Estevam authored
Signed-off-by:
-
Erik Larsson authored
Signed-off-by:
Christopher Dahlberg <crille.dahlberg@gmail.com> Signed-off-by:
-
Erik Larsson authored
This package add support for imx-mkimage for iMX8M. Currently the only hardware it's tested for. Signed-off-by:
-
Romain Naour authored
Signed-off-by:
Romain Naour <romain.naour@gmail.com> Signed-off-by:
-
Thomas Petazzoni authored
The license is GPL-3.0+, not GPL-3.0. Indeed all source files have the mention: "either version 3 of the License, or (at your option) any later version" Signed-off-by: -
Romain Naour authored
Signed-off-by:
-
Fabio Estevam authored
Signed-off-by:
-
Luca Ceresoli authored
Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Luca Ceresoli authored
The Zynq SoCs are now well supported in the mainline kernel, thus stop using the Xilinx fork. As there is not xilinx_zynq defconfig in mainline, use the default arch config. Signed-off-by:
-
Bernd Kuhls authored
Added host-bison and host-flex as dependencies after upstream removed pre-generated files and switched over to build-time generation, for details see: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=033dba2ec06c47a9fe1b190bc3281058fb20738d https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=29c833061c1d8c2d1d23a62e7061561eadd76cdb Signed-off-by:
Bernd Kuhls <bernd.kuhls@t-online.de> Tested-by:
-
Bernd Kuhls authored
Signed-off-by:
-
Bernd Kuhls authored
Signed-off-by:
-
Valentin Korenblit authored
Extract from log: output/build/llvm-5.0.1/include/llvm/Support/ConvertUTF.h:203:53: error: ‘std::wstring’ has not been declared bool ConvertUTF8toWide(llvm::StringRef Source, std::wstring &Result); Also propagate dependency to mesa3d Signed-off-by:
Valentin Korenblit <valentin.korenblit@smile.fr> Signed-off-by:
-
Valentin Korenblit authored
llvm generates libLLVM.so, so it won't work if BR2_STATIC_LIBS is set Also propagate llvm dependency to mesa3d. Link to report from autobuilders: http://lists.busybox.net/pipermail/buildroot/2018-April/218296.html Signed-off-by:
-
James Byrne authored
If SOURCE_DATE_EPOCH is not defined it was given a definition that caused 'git log' to be executed each time the variable is referenced, which is not very efficient given that the answer cannot change. This commit moves the definition of BR2_VERSION_GIT_EPOCH after the inclusion of Makefile.in (so that GIT is defined) and makes it a simply expanded variable so that it is only evaluated once. Signed-off-by:
James Byrne <james.byrne@origamienergy.com> Acked-by:
-
Baruch Siach authored
Fixes CVE-2018-1000156: arbitrary command execution in ed-style patches. Depend on MMU for now, because the patch adds a fork() call. Upstream later switched to gnulib provided execute(), so this dependency can be dropped on the next version bump. Signed-off-by:
-
Chris Brandt authored
Cramfs now has the ability to XIP all ELF files. Cc: Nicolas Pitre <nico@linaro.org> Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Signed-off-by:
-
Chris Brandt authored
As of Linux-4.15, cramfs now has a official maintainer again. Additionally, that person is hosting and maintaining a new version of cramfs-tools. Patches 0001-endian.patch and 0003-fix-missing-types.patch are no longer needed because they have been upstreamed. However, since patch 0002-cygwin_IO.patch is so old, it is being removed until someone that needs it can reapply and test it. At that point, they should submit the changes to the new cramfs-tools maintainer instead of adding the patches back here. Please note that cross-endian support for cramfsck is not supported at this time. Cc: Nicolas Pitre <nico@linaro.org> Signed-off-by:
Matt Weber <matthew.weber@rockwellcollins.com> Signed-off-by:
-
Thomas Petazzoni authored
Since commit f6695219 ("package/gcc: remove gcc 4.8"), UCLIBC_EXTRA_CFLAGS no longer exists, and is therefore always empty. Passing the Buildroot make variable UCLIBC_EXTRA_CFLAGS into the UCLIBC_EXTRA_CFLAGS fed into uClibc's make environment therefore no longer makes sense. Therefore, just pass $(TARGET_ABI). Signed-off-by:
-
Thomas Petazzoni authored
The HOST_GCC_COMMON_WRAPPER_TARGET_FLOAT_ABI variable was incorrectly used as HOST_GCC_COMMON_WRAPPER_TARGET_FLOATABI_, which would always be empty. In practice, this block of code is only used on Blackfin (which has BR2_GCC_ARCH_HAS_CONFIGURABLE_DEFAULTS unset) and Blackfin doesn't use float-abi, so this block of code is in fact useless. But even if it's useless, it's better to have it without typos. Signed-off-by: -
Joshua Henderson authored
This variable was added as part of an EGL i.MX6 workaround in commit (7e9f459a), but appears to currently be abandonded and unused. Remove the use of the variable. Signed-off-by:
Joshua Henderson <joshua.henderson@microchip.com> Acked-by:
-
Jörg Krause authored
Commit d879be30 enabled the build for non-glibc toolchains and added a patch from upstream to fix one remaining build issue with musl. The upstream patch defines the glibc specific macro `__GLIBC_PREREQ` in `include/bsd/sys/cdefs.h`, but the patch does not include this header file in `include/bsd/stdlib.h` which uses the macro. Upstream did committed an earlier patch which adds this header inclusion to `include/bsd/stdlib.h`. So, add this upstream patch as well to fix a build error when building the hcitop tool from the not yet added package bluez-alsa. Note, that the upstream patch address the issue that `<sys/cdefs.h>` is a non-portable header. However, this is not the issue which needs to be fixed by this patch, but solely the needed inclusion of the `include/bsd/stdlib.h` header file, to see the definition of `__GLIBC_PREREQ`. Backported from: 11ec8f1e5dfa1c10e0c9fb94879b6f5b96ba52dd Signed-off-by:
Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by:
-
Thomas Petazzoni authored
zend_alloc.h defines some macros such as: Where _estrdup is the actual function implemented by the PHP core. If this header file is not included, and some code uses estrdup, one ends up with an undefined reference. This happens when libexpat support is enabled. This commit adds a PHP patch that fixes this issue. The patch has been submitted upstream through a Github pull request. Fixes: http://autobuild.buildroot.net/results/889d2c1f509c035cd506e36061939bfddc8f1500/ Signed-off-by:
-
Yann E. MORIN authored
Commit 2759ba03 (liblo: disable werror to fix build issues) tried to fix the issue by passing --disable-werror, but this is not a recognised option. Instead, just fix the code for good. Fixes: http://autobuild.buildroot.org/results/000a46954d0c6d3dbc4b4634a0d3a3c955fac679 http://autobuild.buildroot.org/results/58cb834bbd69bafc5cb0f23c236919c609648c05 http://autobuild.buildroot.org/results/9de1c2007818082e88d77572abf8ff8a72e01930 ... Signed-off-by:
-
Alistair Francis authored
Fix the QEMU memfd compile error: tools/qemu-xen/util/memfd.c:40:12: error: static declaration of 'memfd_create' follows non-static declaration static int memfd_create(const char *name, unsigned int flags) ^~~~~~~~~~~~ that has been introduced since the Glibc 2.27 upgrade. This just involves porting the upstream QEMU patch to the Xen QEMU tree. This fixes: http://autobuild.buildroot.net/results/ec7cda00e07b0c98a9a366244b67611e042e0d4b/ Signed-off-by:Alistair Francis <alistair@alistair23.me> Tested-by:
-
Fabrice Fontaine authored
Remove patch (applied upstream) Signed-off-by:
-
Yann E. MORIN authored
There is no file containing the license text. The closest we can use is the PKG-INFO file, which contains the license name... Fixes: http://autobuild.buildroot.net/results/dff21d63845d3d6a5f78c1000301cdd2104595f4 http://autobuild.buildroot.net/results/220e82f555ce6c98b89605bab72c7ea3eea61c66 ... Signed-off-by: -
Yann E. MORIN authored
The host directory no longer uses /usr. This currently works because we still have the legacy /usr symlink, but for correctness it is better that we just fix it. Signed-off-by:
-
Fabrice Fontaine authored
Signed-off-by:
-
Fabrice Fontaine authored
Signed-off-by:
-
