0x232 was incorrect and it was supposed to be 0x22b.

Change-Id: I45a8786ec1623b5d877eb5cfb1c7d330ac75a127
Signed-off-by: William A. Kennington III <wak@google.com>

Patrick Williams (1):
      build: enable C++20

Change-Id: Idaeaba57151d1414ea8bc86edf90b0d6f3dc044e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

John Edward Broadbent (2):
      Add exception when constructor fails
      Change ownership of handle to eStorageD object

John Wedig (1):
      Remove device name from D-Bus service name

Change-Id: I3ba6cebc730a43413eebabd467c496a0fc358c7d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Patrick Williams (1):
      build: enable C++20

Change-Id: Ib2bc73d1f7227f9a8494598be123eac66c2f8ace
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Patrick Williams (1):
      build: enable C++20

Change-Id: I0c0cee9d599916a7c9041c024f04db4625dd053a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Ed Tanous (2):
      Implement odata annotations ignoring
      Remove regex uses in event service and consolidate

Change-Id: Iea043a32d40f6bebb8e2ae259270b60cde3a01e9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Patrick Williams (1):
      build: enable C++20

Change-Id: Ic6905cbc599b1da73269b65d08c58cab09038c21
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Jim Wright (1):
      PEL: Correct callouts for Everest pgood failures

Sunny Srivastava (1):
      PEL: Error interface for system vpd mismatch

Change-Id: I9f22e179e7f2f6fbbb7f067f897672913c267297
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Chris Cain (1):
      Wait for OCC Active PDR to become available

Change-Id: Id35c7594de2bc6d9962718750e08af452295a38a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Ramesh Iyyar (1):
      mmc: Add HardwareIsolation service to restart if factory resets

Change-Id: I07f0e03520d1a1a49dd9aae9d5fa5b9a935b4f7d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Matt Spinler (1):
      sensor-mon: Add missing arg in fmt::format call

Patrick Williams (1):
      build: enable C++20

Change-Id: Iec427d06b6f1038a3dd5cef5fc06ce45199c4e0e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Paul Fertser (1):
      Signal when trying to set minPasswordLength low

Change-Id: I3babef8dfaf6916864a5e006d97a9a84b6465810
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Patrick Williams (1):
      build: enable C++20

Change-Id: I04a9414df44bf9aa22e857f261aadf9cb96a3121
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Zane Shelley (1):
      Add chip at fault to TOD secondary error callout list

Change-Id: I1cb1cdeafb9eccd05951b1d7079af64c57731600
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Use GPIO instead of IPMI for host condition.

Adopt the multi-host support and syntax for phosphor-state-manager
services.

Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I58ff4291ce3ec055579df5a2463c178e53d93625

The previous order of all `postinst` functions followed by `prerm`
functions made it easy to miss making a change in the `prerm` due
to their large distances from each other in the file.  Reorder these
so that they are grouped by subpackages rather than function type.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ib2be0617f4e1f805ed611688d77bb4d278abbd94

The `multi-user.target.requires/...Host@{i}.service` symlinks were
being added to the `obmc-targets` sub-package, but nothing explicitly
depends on the `host` sub-package.  On systems that do not include
the `host` sub-package, this could result in broken symlinks, and
on systems which do not use the targets it can result in the `host`
daemon not starting.

Move these `Host@{i}.service` symlinks into the `host`
sub-package since that is where the original service file resides.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I43aa5fdbe73f0af3c5d213e45e3a02f2dc093d79

Specify the target links as a variable with iteration rather than
manual entries for each symlink.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: If40bf59dc00beb2c004c5da9953c3c5e64cbffba

Just some minor changes to make it easier to extend.

Change-Id: Ib368da9173983aa02759b9e8bce1c34231cdf391
Signed-off-by: William A. Kennington III <wak@google.com>

This was added with cde0f094 for libseccomp, but shortly after that
upstream moved libseccomp from meta-security to core (241c7d2e6).  As
such, meta-security is no longer used or required.

Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: I371e54b11f6336720dfc6edf0ef733d22b7fb4f2

These layers are all required, so add them to the layer dependencies.
This generates an error earlier in the build process when layers are
missing from the configuration (bblayers.conf).

The dependency list below is informative, but likely not comprehensive:

 -meta-python: python3-inflection-native
 -meta-networking: net-snmp
 -meta-oe: rsyslog, libvncserver, ipmitool, boost-url, libgpiod,
    lmsensors-config, openldap

Change-Id: I1b480224e6ec4b8bd61c8f21d6e569d17363a9a6
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: Iabba6e2d3f2c4e19af821b22164681f1d69a2501

Adds the I2C bus and address in array form to kudo-lib.sh, and
replaces the hardcoded values with references across Kudo layer.

Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I69bbff444e013e61d7f7fd5051612a6d4adc8ded

The method to monitor the power and reset buttons through the
ampere_power_util.sh with phosphor-gpio-monitor was a temporary
solution. It was a temporary workaround until there is support for
Nuvoton GPIO in phosphor-buttons.

Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I34541c0f56887962ad780b811eae44f1d851059d

We do not need to create symlinks to instantiate targets.  Remove
the one for `obmc-bmc-service-quiesce@.target`.

Tested:

```
root@witherspoon:/lib/systemd/system# systemctl start obmc-bmc-service-quiesce@0.target
root@witherspoon:~# obmcutil state
CurrentBMCState     : xyz.openbmc_project.State.BMC.BMCState.Quiesced
CurrentPowerState   : xyz.openbmc_project.State.Chassis.PowerState.Off
CurrentHostState    : xyz.openbmc_project.State.Host.HostState.Off
BootProgress        : xyz.openbmc_project.State.Boot.Progress.ProgressStages.Unspecified
OperatingSystemState: xyz.openbmc_project.State.OperatingSystem.Status.OSStatus.Inactive
```

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I73719f8cbce7ff3e01be868f471627c7acc2f6ca

Some systems have more chassis than hosts.  Use the
OBMC_CHASSIS_INSTANCES variable instead of OBMC_HOST_INSTANCES for
instantiating the service symlinks.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I42eb92a68023788fc8c06e63ed3eb6eb714bf55c

The `multi-user.target.requires/...Chassis@{i}.service` symlinks were
being added to the `obmc-targets` sub-package, but nothing explicitly
depends on the `chassis` sub-package.  On systems that do not include
the `chassis` sub-package, this results in broken symlinks.

Move these `Chassis@{i}.service` symlinks into the `chassis`
sub-package since that is where the original service file resides.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iefc8c0bf8eb9b5f43fa67a13bf52ceb4ce55e52e

Replaces hard-coded GPIO throughout the Kudo layer with a reference
to its line name from DTS.

The process to dynamically obtain the GPIO number for Get is added
to kudo-lib.sh,
 1. Use `gpiofind <Line Name>` to obtain gpiochip# and pin#
 2. If the gpiochip# exceeds the number of GPIO banks of Nuvoton,
    then it is an I/O Expander.
    a. Use `gpiodetect` and extract the I2C bus-addr
    b. Obtain GPIO base value from sysfs using bus-addr
    c. The GPIO number is then the (base + pin#)
 3. If the gpiochip# is within Nuvoton GPIO banks, then calculate
    the GPIO number as ((gpiochip#)*32 + pin#)
Then the GPIO number can be used in the export to obtain the value.

Tested with Nuvoton:
 - Can read/set Nuvoton GPIO with defined line names
 - Can read/set GPIO from I/O Expanders with defined line names

Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I651c0707a8bbc170d3c5a5fc261e5f9c62453e9f

Jayashree Dhanapal (2):
      Added BootType property for Get/Set BootOrder
      Refactoring code for boot-order configuration

Karthikeyan Pasupathi (2):
      Move Common code to their respective header file.
      yosemitev2:Add multi-host critical sensor support

Change-Id: I0f893782f9898f66ba11c80f9aa954f825d26494
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

The LICENSE string 'GPLv2+' is considered obsolete by Yocto and raises a
warning.  Switch them too the accepted tag 'GPL-2.0-or-later'.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I88c639dbb45762e2e019a3503f1f1930b65c09d6

Bitbake currently gives an `obsolute-license` warning for any
of the recipes using `phosphor-ipmi-fru.inc`.  Fix this by switching
the LICENSE variable to `GPL-3.0-or-later`, which matches the contents
of the LICENSE file in the repository.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ife34a6bfaf564b530a889a3fa277ed84c0f2a640

Patrick Williams (1):
      build: enable C++20

Change-Id: I496189da0f3ad9d915dbc371b5bea091aa412d44
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Arun Lal K M (1):
      Fix for cpusensor going into D state.

Change-Id: Ib6add3171c61b0a4cd6cfb40714158785830069c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

George Liu (1):
      meson: Eliminate warning messages

Change-Id: Ieec58b10c27319943702d4bf92934c1162e4eb5c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Patrick Williams (1):
      build: enable C++20

Change-Id: I6e6397106dd2dcbb1eec7569782f4e52d1c896cd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

austinfcui (1):
      Configure UT test static lib in base meson.build

Change-Id: I948dc8aae2076678c951a712af9e5c4d178ecaab
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Chris Cain (1):
      Change power cap bounds to be writable

Zhenwei Chen (1):
      Rename the reverse_name to reverse_names in associations.

Change-Id: I46814b5dca5b7939af0f7c2d57fd2ac7fbdfb1e9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Priyanga Ramasamy (1):
      Set presence for embedded non-synthesized frus

Santosh Puranik (6):
      Fix PCIe device check
      PEL: Check Presence Before Error Logging
      Do not collect VPD unless required
      Update Asset Tag On Factory Resets
      manager: Sync AssetTag Property
      vpd-manager: Fix compile failure.

Change-Id: I1d9c55f770d1923a00f8c80a6a4587b777c86633
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

phosphor-dbus-monitor still uses autoconf and has a hard dependency on
phosphor-snmp, causing phosphor-snmp to be brought in on systems that
have no interest in using SNMP.  The vast majority of systems do not
supply any config for phosphor-dbus-monitor, so the usage of it does not
seem wide enough to enable the IMAGE_FEATURE by default.

- Remove 'obmc-dbus-monitor' from IMAGE_FEATURE by default.
- Clean up all systems that manually remove the dbus-monitor feature or
  package.
- Explicitly add the 'obmc-dbus-monitor' to the following systems:
    - meta-ibm: all
    - meta-inspur: fp5280g2
    - meta-quanta: s6q

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iad6c4104466e21d1b9843dac964a634019eb6935

Jayanth Othayoth (7):
      libipl: p10: error callback support for attribute failures
      libipl: p10: set_ref_clock remove functional primary proc check
      libipl: p10: clock_test remove functional primary proc check
      libipl: p10: sbe_config_update error path cleanup
      libipl: p10: proc_select_boot_prom error path cleanup
      libipl: p10 sbe_start added processor cfam status
      libipl: sbe_config_update enable sbe chip-op failure data

Ramesh Iyyar (3):
      libipl: p10: Use libguard "isEphemeralType" interface
      libipl: p10: updatehwmodel: Handle primary processor ephemeral record
      libipl: p10: updatehwmodel: Added guard type in the trace

Signed-off-by: Ramesh Iyyar <rameshi1@in.ibm.com>
Change-Id: Icea63d40b22d6539c67df3a53635178991a0352f