The section describing the pldm daemon was added a bit prematurely. This
is still work in progress alongwith the MCTP design. This will be
described later on once the design is finalised.

Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>
Change-Id: I0a13c8e561acce64b74ec5f69e6dcab881d087b7

Install headers to $(includedir)/libpldm instead of $(includedir). This
is considered an autoconf best practice.

Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>
Change-Id: I5c84f0b13da58531e6cf5e6967910ec5a0517dd6

The libpldmresponder Makefile.am needs to add top_srcdir to the include
path to enable out-of-tree builds. This way the code can continue to
include something like "libpldm/foo.h".

Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>
Change-Id: If4fa6f1fdac3395dfb389989f18d5de4d259de46

Change-Id: I9fb85f56900519478e3c777901beea1ed4af2b5f
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

This commit implements the GetDateTime command which is
defined in PLDM Bios Control and Configuration Specification.

Change-Id: Iced21bbad7be07d357b6885b1b1e03b07a3da165
Signed-off-by: Sampa Misra <sampmisr@in.ibm.com>

This commit implements the decode of the request and encode of
the response for the setStateEffecterStates command.

Change-Id: Idc5f1316386dc650564d9859a63fbeade24d82d8
Signed-off-by: Sampa Misra <sampmisr@in.ibm.com>

Change-Id: I0068fb8266f742ddfb271447558f28e308e30ccd
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>

To enable: './configure --enable-code-coverage'

To build and generate report: 'make check-code-coverage'

Tested:
Verified that 'make check-code-coverage' generates lcov report.

Signed-off-by: Priyanga <priyram1@in.ibm.com>
Change-Id: I36a9b501c441ef25595808ce77fc1ca36c1ac323

Make this a once-only header.

Change-Id: Ib6cd915de8d97a1ba25fb632c45299c7593068ca
Signed-off-by: Jinu Joy Thomas <jthomas7@in.ibm.com>

This commit adds additional bad path tests for the command
GetPLDMVersion.

Change-Id: I0c88bfbb2f40829cc84f4e29ce632dc1e5e53aec
Signed-off-by: Sampa Misra <sampmisr@in.ibm.com>

Have the decode APIs decode PLDM completion code as well, instead on
relying on the caller to do this. If the code indicates failure, bail
out from further decoding.

Change-Id: I43c9cc924b1d182df40fbf05702cd89a7d5e5a3f
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

This commit defines some data types as per PLDM DSP0240. Only types that
are used are defined.

Change-Id: Id932d638587b4b34c2941d6d0714cd0e1f1be264
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

Document high level API for responder's message handler registration
with the PLDM daemon.

Change-Id: I4c388cefbde7d6599ced214c1e8633b8980da944
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

Change-Id: I22014a2aa7ad18972c509162cba846047300457a
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

Pack the PLDM header while encoding the GetPLDMTypes and GetPLDMCommands
messages.

Change-Id: Ic2413064a63c1a204738c2e0db78ee1537a4f7c3
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

This commit implements the GetPLDMVersion which is required
as part of the base PLDM support to know the version of a
given PLDM type.

Change-Id: I1bcbd938c5b6833f62e0ee2f474b04d76b6970d9
Signed-off-by: Sampa Misra <sampmisr@in.ibm.com>

- The pack_pldm_header API packs the PLDM header into the
  PLDM message.
- The unpack_pldm_header API unpacks the PLDM header from the
  PLDM message.

Change-Id: I60b96954395cdcd1cecf306b7aee4c4de6c0f35a
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>

This commit does the following
- Implements the GetPLDMTypes and GetPLDMCommands commands. These are
  commands that need to be handled by a PLDM device as part of the
  initial PLDM discovery.
- Sets up the build infrastructure: separate libraries for PLDM
  encode/decode libs and the PLDM responder.

Change-Id: I65fa222d2a681c473f579c8e30d84faaf94fe754
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

Add requester and responder flows.

Change-Id: I57ef227b1db52b42c9de26a84f1051b2772b6da8
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

Change-Id: I2feeef07d65eab4be83fee761d67c831917d2281
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>

Propose myself as a maintainer.

Change-Id: Id5612146d1c54125af10dae0abd0aa39c117eb7d
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

Change-Id: I7cea674ea9de77d6f00c16ae86139cf4f4a562f7
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>

The libpldm is written in C and can be shared with projects other than
OpenBMC. The code written in C follows the Linux kernel coding guidelines.
The libpldmresponder and the application code follows the modern C++ and the
clang format follows the OpenBMC coding guidelines.

clang-format for each input file will try to find the .clang-format file
located in the closest parent directory of the input file. Since the C code is
in libpldm directory it has a specific .clang-format.

Change-Id: I9346d454cb20009c6daf526d4ceb722d7400a8d1
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>

Describe code organization in the README.

Change-Id: Iaa180fd5663c9f7fa0eba4778cb2ae7bc936a369
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>