This contains a backport of the TPM TIS core from u-boot mainline, plus
a driver from Eddie that enables the I2C backend.

It fixes I2C support for the AST2600 and enables the TPM on IBM's
rainier platform.

A new AST2600 board 'ast2600-ibm' is added that contains some machine specific
code for performing TPM init. This board does not have a in-tree
defconfig, rather it will be selected by Yocto metadata. This allows us
to keep the number of defconfigs low while still having machine
specific customisation.

Eddie James (6):
      tpm: core: Set timeouts before requesting locality
      i2c: ast_i2c: Remove SCL direct drive mode
      tpm: add support for TPMv2.x I2C chips
      arm: dts: ast2600-rainier: Add NPCT75X TPM
      board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers
      arm: dts: ast2600: Add I2C pinctrl

Heinrich Schuchardt (1):
      tis: fix tpm_tis_remove()

Ilias Apalodimas (1):
      tpm2: Introduce TIS tpm core

Joel Stanley (2):
      configs: ast2600: Remove redundant target option
      configs: ast2600: openbmc: Add TPM TIS I2C support

Johannes Holland (1):
      tpm: add #ifndef to fix redeclaration build errors

Simon Glass (1):
      tpm: Add more TPM2 definitions

Change-Id: Ibd13e0b0a1920f344ead219894a264323f0b8cc5
Signed-off-by: Joel Stanley <joel@jms.id.au>

Eddie James (2):
      spi: fsi: Fix spurious timeout
      spi: core: Display return code when failing to transfer message

Change-Id: I0e62d11debe2de27b35bed6250ff69934b551662
Signed-off-by: Joel Stanley <joel@jms.id.au>

William A. Kennington III (2):
      ncsid: Guarantee MAC override
      ncsid: Fix interruptible RA

Change-Id: If227ed6c1f707808ad6c91a072939357325d0139
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Add layer configuration, license and owner files for meta-qualcomm.

Change-Id: Iaddfe3c38051d689bae175d3b578c83de57a0430
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>

We want to remove wget from busybox so we need an alternate fetcher.

Tested: Ran locally against an installer URL to verify the behavior

Change-Id: Ib3a00002d7d2d02bd6b29e24f0dbe2c7c9243514
Signed-off-by: William A. Kennington III <wak@google.com>

Marri Devender Rao (1):
      PHAL: Log Informational error for PEL created during poweroff

Change-Id: I6df8aa4b0a6819a292b33da09e1d9f0684f66c1b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Kumar Thangavel (1):
      Added default value for systemd_target meson option.

Change-Id: Ic41c1b8c13a386c88b3669964bb2c8bac0658392
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Jiaqing Zhao (2):
      README: Update Type for D-Bus config
      Fix default ValidInput values for DBus configuration

Change-Id: I4ac2e80b32c88cf29f8e44969a8c8430a3f7cebd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Ed Tanous (1):
      Make test code use the correct signed types

Change-Id: Icd7575d7154cd58d21647c79cd6dee3b9a44806a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Zane Shelley (1):
      Fix outdate comment in analyzer filter support

Change-Id: I2e76b047406a3086d0c20b522e4171a075bd260f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

zamiseck (1):
      Preserved Partition Change

Change-Id: I84cc62453f0e90e29771ea8f6764b7f114f033a1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Jiaqing Zhao (1):
      Fix clang-tidy issue

Krzysztof Grobelny (1):
      added support for optionals in unpackProperties

Change-Id: I0fe0f8c675a10c7975b8a6a974da5f1b749d2649
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Lei YU (2):
      obmc-flash-bmc: Ignore SC2295
      image-verify: Skip full verify for non-BMC images

Change-Id: I54e55bb2911f119b9cb36c45133f3f7c7ecd5c41
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Matt Spinler (1):
      monitor:configs:rainier-4u: EPOW config changes

Change-Id: I332361b2c5fd41cc73207d5abc883cdc68ee19d1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Jonathan Doman (2):
      Refactor SST host processor interface
      tools:sst-compare-redfish-os: Handle missing properties

Change-Id: Ief1f8edefbfbec2bfaf3669aaa29c9a709011518
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

George Liu (1):
      Fix get the offset of the threshold sensor

Change-Id: I9760740a6d697001c9bb2ea9635b76a1f959b981
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Brad Bishop (1):
      treewide: comply with the OpenBMC style guidelines

Jiaqing Zhao (1):
      FruDevice: Fix ReScanBus behavior on mux buses

Zev Weiss (1):
      configurations: Avoid spaces in file names

Change-Id: I75d1c115747fea0a1c7b659005d597929e48a87c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Ed Tanous (2):
      Change operationFailed to return 502
      Remove messages::operationFailed from processor

Jiaqing Zhao (2):
      ethernet: Use std::optional<uint32> for VLAN ID
      ethernet: Remove PATCH VLANId support

Nan Zhou (3):
      memory: move Partition codes from callbacks into separate functions
      health: take json_ptr instead of reference when filling status
      auth: change authorization.hpp to authentication.hpp

Troy Lee (1):
      bmcweb: fixes virtual media buffer overflow

wukaihua-fii-na (1):
      Fix segmentation fault when deleting the sessions

Change-Id: Id85eaad442b6f222b0ad06bc6c93d6bdc9311955
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Brad Bishop (1):
      systemd: use qualified path

Change-Id: I79c97e471c0853979fc16a92aa7cbe458142c7f8
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Brad Bishop (1):
      intrusionsensor: systemd: Use qualified path

Change-Id: I828130534d72b5e296b1302ffb085c9786111197
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

The stateless addr has some routing issues outside of the machine under
some ToR configs. Use the stateful address as a preference to avoid
these issues.

Change-Id: I6a30678fd95b5096ee6b3b8add1d1dd409f0db5f
Signed-off-by: William A. Kennington III <wak@google.com>

Only clear the route from the list if the change command succeeds. If we
always clear it, we sometimes race with addresses coming and going. When
this happens, we don't ever update the source route because the route is
gone from the table when the address gets re-added.

Change-Id: I1d8658d8f0e23d74a2bdaf96cab3e399abe2b53e
Signed-off-by: William A. Kennington III <wak@google.com>

Default routes should be preferred by external means before going over
the bridge. This is important for nodes with multiple paths.

Change-Id: If8e1afd57001d6eed36d5b5856c111598d325944
Signed-off-by: William A. Kennington III <wak@google.com>

We only want to advertise that we have a default route if we have an
external (non-bridge) interface that has a default route. This
disambiguates routes on the internal machine network to avoid
blackholes.

Change-Id: I4059ddf0f74a0b15ca3f93f096b79415a851d3f7
Signed-off-by: William A. Kennington III <wak@google.com>

This consolidates all of the mechanisms which write out a persistent IP
into a single place. It also transitions to writing a very simple
persistent file instead of systemd style network units.

Change-Id: Ib99d7646178d2c5383cf23b09248bf24544c1d9e
Signed-off-by: William A. Kennington III <wak@google.com>

This is the only case where we need to add the rule, any addresses that
are BMC specific have a different workflow for assigning the firewall
rules.

Change-Id: If15c0cddb23044f774b55b8585446f923c76d7e8
Signed-off-by: William A. Kennington III <wak@google.com>

We want to answer all of the possible BMC addresses for neighbor
discovery in cases where the bridge is not present on the BMC image.

Change-Id: Id8f0f929bbac2c8526a5ab87b410124357e4bd3d
Signed-off-by: William A. Kennington III <wak@google.com>

Change-Id: I5abbeb2bd49a0434cd51a98fc63e25b6901865eb
Signed-off-by: William A. Kennington III <wak@google.com>

This fixes parsing addresses that have a weight metric.

Change-Id: Ibe93523caea0dccc77bec04e494f46c3db85bbf9
Signed-off-by: William A. Kennington III <wak@google.com>

This makes it possible to perform to coalesce multiple powercycles into
a single one.

Change-Id: I748219a037e38b617b8d662eff498fd3b37acbb6
Signed-off-by: William A. Kennington III <wak@google.com>

William A. Kennington III (1):
      ncsid: update-ra-gw: Always keep RA updated

Change-Id: I3801ae6de5b7b009279eddea7729b5ed40e2611f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Zane Shelley (1):
      Use WOF in core unit checkstop analysis

Change-Id: I90d0c53426b84a878cfb44df47227e8755d9bc43
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

SYSFS_DEPRECATED and SYSFS_DEPRECATED_V2 is no longer needed.

Signed-off-by: Brian Ma <chma0@nuvoton.com>
Change-Id: Ie2920b37db6c81a4e5cce067d39aad564fc4aadd

Some cards were built without TPMs populated. However, we signed builds
for these cards. Remove the key corresponding to the signatures on these
builds and sign builds for cards with TPMs populated with a subsequent
key to prevent non-TPM builds from being used on TPM-enabled systems.

Change-Id: I511a310750319b0e3dc2e028285a77d8cf07d7c7
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Add support to detect USB flash drives and create the /dev/sd* devices.
Also add support for vfat to support USB drives formatted as FAT32.
This support will be used to enable firmware updates via USB flash
drives where the firmware image is stored in the USB drive and it's
plugged into the BMC USB port for AST2600 systems.

Change-Id: I82151eb409e48324607efd65f79fdbe4df36ced3
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>

After updates Gerrit is now hosted at https://gerrit.openbmc.org

.
Urls in the documentation are now updated to reflect this change.

Signed-off-by: Corey Hardesty <corey.hardesty@icloud.com>
Change-Id: I3a7f7d338ca1ce600ccf7b41fa03bd62007925ba

gdbserver improvements:

 - Power9 and Power10 support
 - Multi thread debugging support
 - Updates to parser

libpdbg changes:

 - Remove attn API, it was unused and is now part of the gdbserver
 - Change behaviour of sbe_get_state to suit phal consumer
 - Fix thread_stop
 - Remove printing from thread_regs functions

Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I5101cbd6df3c92fc11ea323f8ae6db4d18ddb5cf

Eddie James (5):
      leds: pca955x: Set blink duty cycle to fifty percent
      leds: Ensure hardware blinking turns off when requested
      iio: pressure: dps310: Refactor startup procedure
      iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
      iio: si7020: Remove reset in probe

Joel Stanley (1):
      ARM: dts: aspeed: everest: Add SiLabs sensor

Change-Id: Ic39b7df5b06863aca8bfdc142b68e7400821d79a
Signed-off-by: Joel Stanley <joel@jms.id.au>

Marri Devender Rao (1):
      PEL: Allow the caller to set the severity for PHAL.Boot.Error

Matt Spinler (1):
      PEL: setup.py: Check for version in env var

Change-Id: I871dba84e98e8918a7075e6617cb981eedcb2e3c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>

Zev Weiss (1):
      romed8hm3: Add nct6779 Super I/O device

Change-Id: I22127e47a9cd08cbae0cb341af9cbecf7814ab60
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>