arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly

The AMU counter AMEVCNTR01 (constant counter) should increment at the same
rate as the system counter. On affected Cortex-A510 cores, AMEVCNTR01
increments incorrectly giving a significantly higher output value. This
results in inaccurate task scheduler utilization tracking and incorrect
feedback on CPU frequency.

Work around this problem in the arm64 topology code by always returning 0
when reading the affected counter. This will disable all users of this
counter from using it either for frequency invariance or as FFH reference
counter. This effect is the same to firmware disabling affected counters.

Details on how the two features are affected by this erratum:

 - AMU counters will not be used for frequency invariance for affected
   CPUs and CPUs in the same cpufreq policy. AMUs can still be used for
   frequency invariance for unaffected CPUs in the system. Although
   unlikely, if no alternative method can be found to support frequency
   invariance for affected CPUs (cpufreq based or solution based on
   platform counters) frequency invariance will be disabled. Please check
   the chapter on frequency invariance at
   Documentation/scheduler/sched-capacity.rst for details of its effect.

 - Given that FFH can be used to fetch either the core or constant counter
   values, restrictions are lifted regarding any of these counters
   returning a valid (!0) value. Therefore FFH is considered supported
   if there is a least one CPU that support AMUs, independent of any
   counters being enabled or affected by this erratum.

The above is achieved through adding a new erratum: ARM64_ERRATUM_2457168.

Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>