md/md-bitmap: move bitmap_{start, end}write to md upper layer

There are two BUG reports that raid5 will hang at
bitmap_startwrite([1],[2]), root cause is that bitmap start write and end
write is unbalanced, it's not quite clear where, and while reviewing raid5
code, it's found that bitmap operations can be optimized. For example,
for a 4 disks raid5, with chunksize=8k, if user issue a IO (0 + 48k) to
the array:

┌────────────────────────────────────────────────────────────┐
│chunk 0                                                     │
│      ┌────────────┬─────────────┬─────────────┬────────────┼
│  sh0 │A0: 0 + 4k  │A1: 8k + 4k  │A2: 16k + 4k │A3: P       │
│      ┼────────────┼─────────────┼─────────────┼────────────┼
│  sh1 │B0: 4k + 4k │B1: 12k + 4k │B2: 20k + 4k │B3: P       │
┼──────┴────────────┴─────────────┴─────────────┴────────────┼
│chunk 1                                                     │
│      ┌────────────┬─────────────┬─────────────┬────────────┤
│  sh2 │C0: 24k + 4k│C1: 32k + 4k │C2: P        │C3: 40k + 4k│
│      ┼────────────┼─────────────┼─────────────┼────────────┼
│  sh3 │D0: 28k + 4k│D1: 36k + 4k │D2: P        │D3: 44k + 4k│
└──────┴────────────┴─────────────┴─────────────┴────────────┘

Before this patch, 4 stripe head will be used, and each sh will attach
bio for 3 disks, and each attached bio will trigger
bitmap_startwrite() once, which means total 12 times.
 - 3 times (0 + 4k), for (A0, A1 and A2)
 - 3 times (4 + 4k), for (B0, B1 and B2)
 - 3 times (8 + 4k), for (C0, C1 and C3)
 - 3 times (12 + 4k), for (D0, D1 and D3)

After this patch, md upper layer will calculate that IO range (0 + 48k)
is corresponding to the bitmap (0 + 16k), and call bitmap_startwrite()
just once.

Noted that this patch will align bitmap ranges to the chunks, for example,
if user issue a IO (0 + 4k) to array:

- Before this patch, 1 time (0 + 4k), for A0;
- After this patch, 1 time (0 + 8k) for chunk 0;

Usually, one bitmap bit will represent more than one disk chunk, and this
doesn't have any difference. And even if user really created a array
that one chunk contain multiple bits, the overhead is that more data
will be recovered after power failure.

Also remove STRIPE_BITMAP_PENDING since it's not used anymore.

[1] https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts986Q@mail.gmail.com/
[2] https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcircus.io/



Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-6-yukuai1@huaweicloud.com


Signed-off-by: Song Liu <song@kernel.org>