Instead of using helper scripts in uefi-tools to build the edk2 targets,
add support for building edk2 targets into build-uefi script. This
allows moving away from depending on the use of uefi-tools repo.

In addition to this, update the build configs for each platform to
specify the platform description files that have to be built. While at
it, fix a typo in the array name used in the config file of rdn1edgex2
platform.

Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I4d73712f90540dc7a98f97528972b6c215c1bdc3

Instead of depending on a separate directory outside of build-scripts
to hold the supporting files required to create the cpio image, migrate
those supporting files into build-scripts. This helps with removing
the dependency on requiring a separate repo to host these supporting
files.

Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I6ea1b5ea6cab4251c4545a33d818527d3d3f0e40

Aditya Angadi authored Dec 16, 2020 and Thomas Abraham committed Dec 18, 2020

Reference Design platform RD-Daniel-ConfigXLR has been renamed to
RD-V1-MC. Correspondingly, remove all uses of 'rddanielxlr' and replace
it with rdv1mc where appropriate.

Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I8dc6c50391dccdfbe7bffcf560c59d71d0426dac

Aditya Angadi authored Dec 16, 2020 and Thomas Abraham committed Dec 18, 2020

Reference Design platform RD-Daniel has been renamed to RD-V1.
Correspondingly, remove all uses of 'rddaniel' and replace it with rdv1
where appropriate.

Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I39f20cf4f95bf1d1af63de40742a8db22aa440bd

Update the grub menu entry name as "SGI-575 Busybox". This indicates
the platform on which the grub loads the next stage of software.

Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I8030a3d3d331028d2bf6d4cb5039c0ab32a0ccc8

All the platforms have virtio.net enabled on them. So the use of
SMSC Lan91x controller can be removed.

Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I0cc8955cea92525b4a5ad0a8bf60df7487dc69bc

Aditya Angadi authored Nov 22, 2020 and Thomas Abraham committed Nov 27, 2020

Add the initial build configuration files for RD-N2 platform. Support
for uefi and busybox boot is also enabled.

Change-Id: Iea2fa0ea0e0f2ccd6bcffd8775d6e0d59a1d76fb
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Using build-target-bins on Ubuntu 20.04 results in the following error:
"uboot_out: invalid indirect expansion"
Ubuntu 20.04 LTS uses bash version 5.0 which doesn't expand an indirect
expansion if the variable is not defined, which caused the above error.
Fix this by checking if the uboot_out variable is not empty before doing
the indirect expansion.

Change-Id: Ie6e235f76809c40f36735b2e5844f668f89eff11
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Use $PARALLELISM for make builds to spawn multiple jobs. This results in
better utilization of multi-core processor in the host machine used for
build resulting in lesser build time.

Change-Id: I2986a0ba3baf1db7409f55c018a4ebbcf6ccbc73
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

'doxygen' package is required to build documentation for SCP-Firmware.
So add it to the list of prerequisite packages to be installed.

Change-Id: I7c152f7399f72023717f550b17bbf7fea5bc2c80
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Thomas Abraham authored Oct 04, 2020 and Vijayenthiran Subramaniam committed Oct 09, 2020

EDK2_ENABLE_RAS compilation flag was incorrectly being defined for
builds with RAS disabled. Fix this for all the SGI/RD platfotms.

Change-Id: I01209f6f03ca26c3b2e16c415856630cbf45c6e2
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Thomas Abraham authored Oct 04, 2020 and Vijayenthiran Subramaniam committed Oct 09, 2020

Update the name of the compiler binary for using the compiler from Arm
developer site. This change corresponds to the compiler name as used in
gcc-arm-8.3-2019.03-x86_64-arm-eabi version of the compiler.

Change-Id: I93f162fb0ab318fbf049a46c26a8885102982d60
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Thomas Abraham authored Oct 03, 2020 and Vijayenthiran Subramaniam committed Oct 09, 2020

Instead of letting the common config file choose the compiler for the
platform, let the platform config choose the most suitable compiler
for the platform.

Change-Id: I994a200ec5959704d0f361158a7a6f79c74d0a60
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Vijayenthiran Subramaniam authored Jul 14, 2020 and Thomas Abraham committed Jul 27, 2020

Config data for platforms uses TARGET_$plat[TBBR] to enable or disable
the TBBR support in arm-tf builds. Fix arm-tf build script to use the
above variable name.

Change-Id: Id6389abc167ee412fd70e15090b6af54acd2b29e
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Vijayenthiran Subramaniam authored Jul 14, 2020 and Thomas Abraham committed Jul 27, 2020

Commit 3cb84a5 ("plat/arm: Rentroduce tb_fw_config device tree") in the
Arm Trusted Firmware project [1] introduced changes such that the
fw_config device tree will maintain the information shared across all
the BLx images while the tb_fw_config device tree will hold the BL2
configuration nodes. Update build-target-bins.sh file to include both
fw_config and tb_fw_config device trees during the fip image creation
stage.

[1]: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3cb84a54258e148ba0240fc5fbe4ef828339c13d



Change-Id: Ica4aede67782c42686a2971d50601eca86609d52
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Vivek Kumar Gautam authored Apr 16, 2020 and Thomas Abraham committed Jul 14, 2020

Update the name of kvmtool package to point to correct URL.

Change-Id: Icab25b656dbd2efc2ab779aab3cc52f879e54217
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>

Omkar Kulkarni authored Apr 22, 2020 and Thomas Abraham committed Apr 22, 2020

Reenable the RAS support for platforms with the DMC-620 controller.
The platforms on which RAS support is being reenabled include
SGI-575, RD-N1-Edge and RD-E1-Edge.

Change-Id: I5766e3549ed0be9f89050b490eaa809acf8a8c24
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>

Omkar Kulkarni authored Apr 22, 2020 and Thomas Abraham committed Apr 22, 2020

The compile time macros defined the platform configuration file for
UEFI build is not correctly passed as build parameters during edk2
build. Fix this.

Change-Id: I7de41c754a402c66f86bbfef6b5c893104aa5694
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>

Due to changes in upstream TF-A support for SPM, there is failure in
communicating non-trusted software communicating with management
mode software. Until this get resolved, keep management mode and
support for RAS disabled.

Change-Id: I47d63a59e72fa96c42102e50372069c9c12c3fd6
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Starting from SCP v2.6.0, the release mode build does not print any
SCP logs. So change the default build mode to debug mode.

Change-Id: Ia36cb6edcda35130118ba92c3b14feff20ea2e39
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

There are changes in edk2-platforms which requires each of the platform
to have its own platform description file. Adapt to these changes
in edk2-platforms repo.

Change-Id: I586e41f4c64f2485a32a719e99cd22665f86892d
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

There are changes in edk2-platforms which requires each of the platform
to have its own platform description file. Adapt to these changes
in edk2-platforms repo.

Change-Id: Id6f0a101d460b2f3200575e2728a481f05a286af
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

There are changes in edk2-platforms which requires each of the platform
to have its own platform description file. Adapt to these changes
in edk2-platforms repo.

Change-Id: I01b94088947e93381975dd9c4d2e9ebdcb277357
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

There are changes in edk2-platforms which requires each of the platform
to have its own platform description file. Adapt to these changes
in edk2-platforms repo.

Change-Id: I3d82aad89a77b4f1a05b81486d0379b2a6148c6a
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Remove the use of earlycon in the kernel boot argument as this is
not required for the boot test anymore.

Change-Id: I24a35d1dbb90865d9e7deba2a626c13440abde8e
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

There are changes in edk2-platforms which required each of the platform
to have its own platform description file. Adapt to these changes
in edk2-platforms repo.

Change-Id: Ida7273b4670211ee1359337ed1f113feb047ab32
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Add RD-Daniel Config-XLR as a platform support for UEFI boot test.

Change-Id: I744ad57240ba8f866299cb01a2c2f5e4183d1110
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Aditya Angadi authored Apr 07, 2020 and Thomas Abraham committed Apr 13, 2020

Add RD-Daniel Config-XLR as a platform that supports the busybox
boot test.

Change-Id: I9ba80f9eb18d074cf9972369d86320cfdd7950d8
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Aditya Angadi authored Apr 06, 2020 and Thomas Abraham committed Apr 13, 2020

Add the initial build configuration files for RD-Daniel Config-XLR
platform.

Change-Id: Icf8b7acbd710464b0b46752fdb05bb6899c5c746
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Vijayenthiran Subramaniam authored Mar 29, 2020 and Thomas Abraham committed Mar 29, 2020

Commit 4d37aa76fdc5 ("plat/arm/sgi: introduce number of chips macro")
in Arm trusted firmware introduced a change to allow platforms to
specify the number of chips to boot on a platform. A new build
time parameter 'CSS_SGI_CHIP_COUNT' was introduced to specify the
chip count. Adapt the build configuration of RD-N1-Edge dual chip
platform accordingly.

Change-Id: I56091b5034ecc7cd2e76422f2bc25f06b91403ea
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Aditya Angadi authored Feb 26, 2020 and Thomas Abraham committed Mar 29, 2020

Commit 25ac87940 ("fconf: Add dynamic config DTBs info as property")
in the Arm Trusted Firmware project changes the name of the
*_tb_fw_config.dtb as *_fw_config.dtb. Correspondingly change the
build-target-bins.sh file.

Change-Id: I20d37702ae6ea29801680018190b3cd87d6ec336
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

As the FVPs new required gcc6 to be available on the host platform,
add gcc6 to the list of prerequisites to be installed.

Change-Id: I1ec3bf894ae7f805e8f2bdd2a5f92032ff3df027
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Add 'pkg-config' and 'gdisk' to the list of list of prerequisite
packages to be installed.

Change-Id: Id11c91b9ddefbae86ee3ac63fe9e27fd49da2717
Reported-by: Toshihisa Oishi <toshihisa.oishi@arm.com>
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Aluvala Sai Akhilesh authored Oct 23, 2019 and Thomas Abraham committed Dec 27, 2019

RD-E1-Edge platform can be validated using ACS test suite. So enable
usability of this script on RD-E1-Edge platform.

Change-Id: Ia11d754dcd56f44931e6d8e93fd47517361ec628
Signed-off-by: Aluvala Sai Akhilesh <aluvala.saiakhilesh@arm.com>

Vijayenthiran Subramaniam authored Oct 23, 2019 and Thomas Abraham committed Dec 27, 2019

Allow the use of busybox boot test build script to be usable for
rdn1edge dual chip platform as well.

Change-Id: I4223526b5a33ed30071a561a68e7991b0aac4a72
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Vijayenthiran Subramaniam authored Oct 23, 2019 and Thomas Abraham committed Dec 27, 2019

RdN1Edge platform supports a dual-chip configuration wherein two
rdn1edge SoCs are connected through a high speed coherent CCIX link.
Add support for building rdn1edge dual chip platform. This dual-chip
RDN1Edge platform name is rdn1edgex2 and should be used as the value
of the parameter '-p' during build.

Change-Id: Ide2709aa7a6dac21b4eb5fbf0f69806f1f5b3464
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Add RD-Daniel as a platform support for busybox boot test.

Change-Id: I3eebdbaed3d59431fdba17e144d835f61a2f9391
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Add RD-Daniel as a platform support for UEFI boot test.

Change-Id: I1de0ea7a0ceb81c3b0145d630e6601261e6bfe1b
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Add the initial build configuration files for RD-Daniel platform. Support
for uefi and busybox boot is enabled.

Change-Id: Iedf084552e3ebfe9820b998d9423661d51cd9c35
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

In order to support build of RD-E1-Edge platform with and without
RAS support, add new build defintions ARM_TF_ENABLE_SPM and
ARM_TF_RAS_EXTENSION. These have to be set to '1' in order to
support SPM and RAS support.

Change-Id: Ia3629bf2236cc815ffe3b1e35b27b07e62cabf9d
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>