CHANGES

	libgcrypt, libgpg-error, libnftl, libnspr, libnss, libopenssl,
	luksmeta, mariadb, mbedtls, mongodb, mosquitto, ncurses,
	nfs-utils, nghttp2, nodejs, openvmtools, php, protobuf, putty,
	qemu, qt5base, samba4, swupdate, systemd-bootchart, thttpd,
	uclibc, unzip, util-linux, wireshark

	Issues resolved (http://bugs.uclibc.org):

	#10806: Allow nfs-utils to use ipv6
	#11781: mariadb build error
	#12031: Build of cups-filters fails while linking, apparently due..
	#12141: eudev package is missing "render" and "kvm" groups
	#12181: dropbear: norootlogin (-w) no longer works when PAM is enabled
	#12241: Permission denied while running "make"

2019.02.5, Released September 2nd, 2019

	Important / security related fixes.

	Filesystems: Pass extra pax options to tar for binary
	reproducibility.

	Updated/fixed packages: apache, arm-trusted-firmware,
	asterisk, atk, autofs, batctl, batman-adv, berkeleydb, brotli,
	busybox, bzip2, clamav, cloop, cmake, collectd, connman-gtk,
	cryptopp, dahdi-linux, dahdi-tools, daq, dehydrated, dovecot,
	dovecot-pigeonhole,, elfutils, evtest, exim, expect, giflib,
	git, glib-networking, glibc, gnupg2, gnutls, go,
	gst1-rtsp-server, gtkperf, gupnp-tools, gvfs, imagemagick,
	imx-uuc, intel-microcode, json-glib, lftp, libbsd, libcurl,
	libgit2, libgtk3, libmodplug, libnss, libpri, libshout,
	libss7, libssh2, libvips, libxcb, linux-headers, mdadm,
	mesa3d, metacity, mpg123, mosquitto, musl, nginx, openblas,
	opencv3, openldap, openvmtools, pcmanfm, php, pigpio,
	postgresql, prboom, proftpd, proj, python, python-django,
	python-idna, python-numpy, python-urllib3, python3, qemu, qt5,
	qt5base, qt5enginio, quagga, rygel, squid, subversion,
	tcpreplay, unzip, vlc, vte, webkitgtk, weston, wireless-regdb,
	xen, xfont_font-util, xlib_libICE, xlib_libXfont,
	xlib_libXfont2, yad, zeromq

	Issues resolved (http://bugs.uclibc.org):

	#11741: pigpio does not build host-pigpio
	#11876: automount using host mount/umount
	#11881: Build breaks with lftp package enabled and libexpat1-dev inst..
	#11921: dahdi fails to build
	#11961: libpri build failure
	#12096: tcpreplay: build fails if libdumbnet-dev is installed in the..
	#12106: daq: build fails if libdumbnet-dev is installed in the host
	#12126: vc4 has neon as hard dependency

2019.02.4, Released July 10th, 2019

	Important / security related fixes.

	arch: x86: Fix typo breaking 'core-avx2' variant, add Westmere
	variant.

	linux: Workaround -Werror related build failure on powerpc,
	by forcing CONFIG_PPC_DISABLE_WERROR on.

	support/testing: Emulate a machine with 256MB RAM to fix
	issues with certain tests running out of memory.

	test-pkg: Correct long option handling and clean output dir
	after a successful build to save disk space.

	Ensure custom <pkg>_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS are
	passed before the standard exclusions so they are not ignored
	by rsync when using override-srcdir.

	Defconfigs: QEMU: use 'rootwait' kernel option to ensure root
	partition is available before mounting.

	Updated/fixed packages: barebox, bzip2, davfs2, dbus, dialog,
	docker-cli, docker-engine, expat, faad2, ffmpeg, freeswitch,
	gerbera, haveged, irssi, libcdadio, libgit2, libglib2,
	libsecret, libvncserver, lmbench, logrotate, mariadb, meson,
	mongoose, monit, mpd, openblas, php, postgresql, psplash,
	python, python-django, python3, qt5base, samba4, taglib,
	tvheadend, vlc, webkitgtk, xserver_xorg-server, znc

2019.02.3, Released June 7th, 2019

	Important / security related fixes.

	Infra: pkg-config: Use a dedicated timestamp file rather than
	.config as that gets touched by linux-4.19+, causing repeated
	builds.

	check-bin-arch: Also ignore /usr/lib/grub to support merged
	/usr setups, similar to how /lib/grub is ignored.

	gnuconfig/config.sub: Add C-SKY architecture support.

	Updated/fixed packages: assimp, atftp, atop, botan, busybox,
	ca-certificates, chocolate-doom, cjson, coreutils, cracklib,
	ddrescue, dhcp, docker-cli, docker-containerd, docker-engine,
	dosfstools, dovecot, dovecot-pigeonhole, dropbear, exim,
	ffmpeg, flare-engine, gcc, gdb, gerbera, glibmm, go, gpsd,
	gst-ffmpeg, gst1-plugins-bad, gst1-plugins-base, imagemagick,
	intel-microcode, jasper, kf5-kcoreaddons, kismet, libcurl,
	libglib2, libnss, libopenssl, libsigrok, libssh2, libupnp18,
	linuxptp, luajit, lynx, matchbox-panel, mender,
	netcat-openbsd, netsurf, nfs-utils, opus, orc, owfs,
	pcsc-lite, php, popt, postgresql, python, python-cython,
	python-django, python-ply, qt5enginio, rpm, runc, samba4,
	sqlite, subversion, supertux, systemd, tslib, uclibc,
	v4l2loopback, webkitgtk, woff2

	Issues resolved (http://bugs.uclibc.org):

	#11816: Only selected coreutils binaries are installed
	#11841: grub-efi.cfg not used when building EFI disk image
	#11911: systemd v240 memory leak in systemd-journald

2019.02.2, Released April 29th, 2019

	Important / security related fixes.

	Only build host-lzip / host-xz when really needed by packages,
	not just when not available on the build host.

	fs: Set FAKEROOTDONTTRYCHOWN environment variable to not
	forward {f,l,}chown calls to libc when running under fakeroot
	to fix issues when building in restricted environments
	(E.G. user namespace with bubblewrap).

	Linux: Also build default make target to ensure extra files
	like the gdb scripts enabled by CONFIG_GDB_SCRIPTS are also
	built. Notice: This may mean that extra host utilities like
	uboot-mkimage are needed.

	Defconfigs: ASUS tinker and Amarula vyasa rk3822: Support
	larger kernel images, Atmel SAM5D27, SAM5D2,3,4 xplained:
	Increase rootfs size to fit utilities, Raspberry Pi 64bit:
	Include overlays in sdcard image

	Updated/fixed packages: android-tools, apache, bind, binutils,
	busybox, civetweb, cjson, copas, davfs2, docker-cli,
	docker-containerd, docker-engine, dovecot, dovecot-pigeonhole,
	freerdp, gerbera, ghostscript, git, gnutls, go, gst-omx,
	gst1-plugins-base, gst1-plugins-ugly, haproxy, hostapd,
	ipsec-tools, libfreefare, libfuse, libkrb5, libpng, libxml2,
	libxslt, linknx, linux, linux-firmware, linux-tools, live555,
	lldp, lrzsz, lynx, madplay, make, minicom, mongodb, msmtp,
	musl, mutt, neon, netsnmp, numactl, opus, perl, php,
	postgresql, pure-ftpd, python-urllib3, python3, qt5base,
	rapidxml, rpm, rsyslog, ruby, runc, samba4, sane-backends,
	softether, stunnel, sysklogd, syslinux, syslog-ng,
	systemd-bootchart, thttpd, thrift, tiff, tor, tpm2-tools,
	tpm2-tss, webkitgtk, yaffs2utils, wget, wpa_supplicant, wsapi,
	xapp_xfd, xapp_xload, xlib_libXpm, xserver_xorg-server, xz,
	znc

	Issues resolved (http://bugs.uclibc.org):

	#11756: package/syslinux: MBR's don't fit because of binutils..
	#11761: Building custom kernel 5.1-rc3 or later breaks on objtool

2019.02.1, Released March 29th, 2019

	Important / security related fixes.

	pkg-generic: Only tweak .la files needing it to ensure they
	are not included in subsequent package file lists.

	test-pkg: Generate a basic package config if none is
	specified.

	Updated/fixed packages: asterisk, avahi, bash, beecrypt,
	binutils, busybox, clamav, cups, efl, eigen, fetchmail, file,
	flashrom, fltk, gerbera, git, glibc, gnuradio, go,
	gst-plugins-bad, intel-gmmlib, jq, kexec, kf5-modemmanager-qt,
	leveldb, libcurl, libdrm, libftdi1, libglib2, libiio, libpcap,
	libseccomp, libssh2, log4cplus, lvm2, mariadb, mender,
	mongodb, mosquitto, musl, nodejs, ntp, openjpeg, owfs, php,
	pure-ftpd, putty, python-aiojobs, qt5webkit, rdesktop, samba4,
	sunxi-tools, supertux, swupdate, tpm2-abrmd, tpm2-tss,
	wavemon, wireshark, vsftpd, xapp_xdm, xen,
	xdriver_xf86-video-fbdev, xlib_libXdmcp

	Issues resolved (http://bugs.uclibc.org):

	#11716: Typo on website, saying latest release is 2018.2.11

2019.02, released March 4th, 2019

	Minor fixes.

	Libressl support added for Qt 5.6 as a replacement for
	openssl, as 5.6 is not compatible with openssl 1.1.x.

	Updated/fixed packages: cutelyst, devmem2, gqrx,
	gst-plugins-bad, libraw, libsoxr, qt5base, runc, systemd, tor

2019.02-rc3, released March 1st, 2019

	Fixes all over the tree.

	Openssl support dropped from Qt 5.6, as it isn't compatible
	with openssl 1.1.x.

	Toolchain: GCC 8.x updated to 8.3.0, fixing a number of
	issues.

	Dependencies: Require CMake 3.8 or newer to fix compilation
	issue with certain packages. If not available, host-cmake will
	instead be built.

	Printvars: Fix performance regression since 2018.02

	Scanypi: Correctly handle underscores in python package names.

	Updated/fixed packages: botan, clamav, cryptopp, i2pd,
	ibrcommon, iproute2, libcpprestsdk, libssh, lua-curl,
	luaexpat, qt5base, runc, stress-ng, syslinux, systemd,
	upmpdcli, zbar

	Issues resolved (http://bugs.uclibc.org):

	#9966: util-linux-2.30/.stamp_built' failed
	#11696: possible typo in board/pc/post-build.sh

2019.02-rc2, released February 23th, 2019

	Fixes all over the tree.

	Removed zynq_zybo defconfig, as it hasn't seen any update
	since it was added in 2016, and uses a U-Boot version not
	compatible with openssl-1.1.x.

	Linux: Ignore user supplied downloadable hashes, as no hash
	checksums are available for those.

	Updated/fixed packages: bind, cryptopp, docker-containerd,
	dtc, efivar, gdb, imagemagick, ipmiutil, libcpprestsdk,
	libcurl, libgpiod, libid3tag, libv4l, log4cplus, luvi,
	madplay, mender, mosquitto, poco, postgresql, proftpd,
	pulseaudio, python-django, qemu, qt5base, qwt, rabbitmq-c,
	reaver, safeclip, stress-ng, swupdate, syslog-ng, systemd,
	tor, unzip, xenomai

	Issues resolved (http://bugs.uclibc.org):

	#11501: compile sdl2 with enable wayland
	#11681: .. unable to initialize decompress status for section..

2019.02-rc1, released February 13th, 2019

	Fixes all over the tree and new features.


	Dependencies:

	Require Python >= 2.7 as it is needed for E.G. building
	libglib2.

	Ensure GNU gzip is used for reproducible tarballs (instead of
	pigz)


	Infrastucture:

	Ensure the PLATFORM and OS environment variables are not set,
	as they cause build issues for some packages.

	The package list infrastructure now correctly handles packages
	installing files with old mtime.

	Add a config option to force all optional host utilities to be
	built, even if suitable versions are available on the build
	machine.

	graph-build-time: Also show time spent downloading

	Download: fixes for SSH/SCP support

	Ensure user provided permissions override permissions from
	packages.

	SDK: Fix handling of relative symlinks (targets starting with
	'.' or '..')

	BR2_SYSTEM_DEFAULT_PATH setting to customize the default path
	for processes.

	The custom skeleton logic will now populate the needed /bin,
	/lib, /sbin directories/symlinks if not present. Merged /usr
	can now be used with a custom skeleton.

	Rootfs overlays can now override symbolic links from
	packages. This was disabled to ensure the correct symbolic
	links are present when merged /usr is used. Instead validate
	that the rootfs overlays do not include invalid /bin, /sbin
	and /lib entries.

	The waf infrastructure now support the <pkg>_SUBDIR variable,
	similar to the other package types.

	cmake: Also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake

	Various improvements to the meson infrastructure.

	Luarocks: A Buildroot addon has been added to automate
	creating a Buildroot package from luarocks, similar to
	scancpan and scanpypi.

	scanpypi: protect against zip-slip vulnerability in zip/tar
	handling

	check-package: fix Python 3 support

	get-developers: Fix behaviour when called from elsewhere than
	the toplevel directory.

	pkg-stats: Show latest upstream version of each package, based
	on data from release-monitoring.org

	kconfig: Fix for make linux-menuconfig / uboot-menuconfig from
	a clean tree when ccache is enabled.

	Default to sha256 password encoding, drop md5 support.


	Architecture:

	Support for RISC-V 32bit architecture, ARM A55, 75 and Saphira
	variants, MIPS support for mips32r3, mips64r3 and Marvell
	Octeon II/III variants.


	Toolchain:

	ARC toolchain 2018.09, ARM 8.2-2018.11, Codescape IMG/MTI MIPS
	2018.09-02, MUSL 1.1.21, GCC 6.5.0 / 7.4.0, GDB 8.2.1


	Packages:

	openssl: Bump to 1.1.1x series, bringing TLSv1.3 support and
	long term support.

	fftw: Split into fftw-{single,double,long-double,quad}
	packages for the different data precision options.

	libcurl: Now has explicit TLS backend selection options.

	linux: Support building device tree blobs with the -@ option
	for device tree overlays.

	weston: The weston-imx i.MX variant is now used when
	imx-gpu-viv is enabled

	pkgconf: Update to 1.5.3, which brings support for
	--define-prefix (used by GStreamer)

	Add host-python3-setuptools package to handle host python
	packages needing python3 with setuptools support.


	New defconfigs: Aarch64 EFI, Orangepi one plus, Orangepi lite
	2, QEMU RISC-V 32bit virt, Rock64


	New packages: brcm-patchram-plus, clinfo, cunit, docker-cli,
	erlang-p1-eimp, exempi, fail2ban, fftw-double,
	fftw-double-long, fftw-quad, fftw-single, gerbera, grpc,
	gst1-shark, intel-gmmlib, iwd, kf5-kcoreaddons, libeastl,
	libpackagekite, libtorrent-rasterbar, lua-std-debug,
	lua-std-normalize, mini-snmpd, netsurf, pamtester, pcm-tools,
	python-aiodns, python-aiohttp, python-aiohttp-jinja2,
	python-aiohttp-remotes, python-aiohttp-security,
	python-aiohttp-session, python-aiohttpd-sse, python-aiojobs,
	python-cchardet, python-pycares, python-sentry-sdk,
	python-wtforms, python3-setuptools, rcw, rtc-tools, shim,
	utp_com, vmtouch, websocketpp

	Removed packages: fftw, lua 5.2.x, luacrypto, perl-time-hires,
	python-pyqt, qt, qtuio, tn5250

	Issues resolved (http://bugs.uclibc.org):

	#10851: Patch to handle numpad Enter key properly
	#11066: x11r7 X11 S40xorg leads to a black screen on QEMU x86..
	#11126: Bash Shell Programming using Buildroot
	#11426: pps-tools bash dependency
	#11476: stdio2.h error invalid use of __builtin_va_arg_pack
	#11536: dt-utils building fails with glibc 2.28
	#11546: open-vm-tools with glibc 2.28
	#11566: Fix init script
	#11576: Unable to start apache with event MPM on raspberry pi 3
	#11591: [pkgconf 1.5.3] xserver OpenGL support is missing
	#11606: libjpeg has no Config.in
	#11616: 2018.02.09 fails to build libzlib with full RELRO..
	#11656: Custom device tree and u-boot boot.scr not integrated..
	#11666: Touchscreen with (Py)Qt5 should use tslib instead of evdev

2018.11.4, Released March 28th, 2019

	Important / security related fixes.

	Updated/fixed packages: avahi, beecrypt, binutils, botan,
	busybox, clamav, cups, devmem2, efl, fetchmail, file, fltk,
	gcc, gdb, git, go, gst-plugins-bad, iproute2, jq,
	kf5-modemmanager-qt, leveldb, libopenssl, libraw, libseccomp,
	libsoxr, libssh2, mariadb, mosquitto, nodejs, ntp, openjpeg,
	perl, php, putty, qt5webkit, rdesktop, runc, samba4, swupdate,
	systemd, tor, vsftpd, wireshark, xapp_xdm, xen, xlib_libXdmcp

2018.11.3, Released February 23th, 2019

	Important / security related fixes.

	Ensure the PLATFORM and OS environment variables are not set,
	as they cause build issues for some packages.

	The package list infrastructure now correctly handles packages
	installing files with old mtime.

	Linux: Skip hash checks for user supplied downloadable
	patches, as no hash checksums are available for those.

	scanpypi: protect against zip-slip vulnerability in zip/tar
	handling

	Download: fixes for SSH/SCP support

	SDK: Fix handling of relative symlinks (targets starting with
	'.' or '..')

	Updated/fixed packages: bind, dhcpcd, docker-compose,
	docker-containerd, docker-engine, dovecot, dovecot-pigeonhole,
	dtc, efivar, ghostscript, gnuradio, imagemagick, jpeg-turbo,
	libarchive, libb64, libcurl, libgeotiff, libgpiod, libid3tag,
	libupnp18, log4cplus, madplay, meson, mosquitto, openssh, php,
	poco, postgresql, proftpd, pulseaudio, python, python-django,
	python3, qt5base, reaver, runc, sg3_utils, sqlcipher,
	swupdate, systemd, unzip, webkitgtk, xenomai

2018.11.2, Released January 30th, 2019

	Important / security related fixes.

	Defconfigs: Fixes for imx6slevk, imx7dsabresd, imx8mqevk, Lego
	EV3, QEMU AArch64-virt

	Download: Fix scp download handling

	check-package: fix Python 3 support

	get-developers: Fix behaviour when called from elsewhere than
	the toplevel directory.

	kconfig: Fix for make linux-menuconfig / uboot-menuconfig from
	a clean tree when ccache is enabled.

	cmake: Also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake

	Updated/fixed packages: acpica, apache, apr, avrdude, cargo,
	cc-tool, dash, dhcpdump, dmalloc, docker-containerd, efivar,
	fwts, glibc, gnuchess, gnupg2, go, leveldb, libarchive,
	libassuan, libftdi1, libgpg-error, libhttpparser, libkcapi,
	libmad, libsndfile, libsquish, liburiparser, libwebsock,
	libxml2, lighttpd, llvm, lm-sensors, lua-msgpack-native, lxc,
	mariadb, mbedtls, meson, mosquitto, netatalk, nodejs, odhcp6c,
	openresolv, openssh, pango, patchelf, php, python-django,
	python-numpy, python-pyyaml, rauc, rp-pppoe, s6-networking,
	samba4, sdl_sound, shairport-sync, sqlite, subversion,
	sunxi-cedarx, swupdate, systemd, tcpreplay, tekui, tmp2-abrmd,
	tpm2-tools, tpm2-tss, udisks, unixodbc, usb_modeswitch,
	webkitgtk, wireshark, wolfssl, xapp_rgb, xenomai, xerces

	Issues resolved (http://bugs.uclibc.org):

	#11576: Unable to start apache with event MPM on raspberry pi 3

2018.11.1, Released December 20th, 2018

	Important / security related fixes.

	defconfigs: Fixes for bananapi m2 ultra, ci20

	Download wrapper: Fix for urlencode handling

	Updated/fixed packages: asterisk, docker-compose,
	docker-engine, dt-utils, gnutls, go, grub, libbsd, libcurl,
	libpgpme, libiscsi, liblo, libmpd, libopenssl, liboping,
	libpam-tacplus, libpjsip, linux-firmware, liquid-dsp,
	lua-cqueue, luvi, lxc, lynx, nginx, nodejs, openzwave, php,
	pps-tools, proftpd, prosody, sdl2_net, squashfs, swupdate,
	uclibc, vtu, webkitgtk, wine, xen

	New packages: docker-cli

	Issues resolved (http://bugs.uclibc.org):

	#11426: pps-tools bash dependency
	#11536: dt-utils building fails with glibc 2.28

2018.11, Released December 1st, 2018

	Minor fixes.

	Updated/fixed packages: c-ares, quagga, squid

2018.11-rc3, released November 30th, 2018

	Fixes all over the tree.

	Defconfigs: Fixes for Armadeus APF27, imx6sabre, Olimex A20
	olinuxino lime legacy, Orangepi zero plus 2, PC, Riotboard.

	graph-depends: Fix for package names starting with a non-alpha
	character.

	Updated/fixed packages: alsa-utils, botan, dante, domoticz,
	dtc, freetype, gauche, gcc, gdb, ghostscript, glibc,
	imx-usb-loader, libbsd, libid3tag, libkrb5, libmicrohttpd,
	libopenssl, libsoxr, linux, motion, msgpack, mtd,
	perl-net-ssleay, php, popt, python-numpy, qt5declarative,
	samba4, shadowsocks-libev, stress-ng, systemd, usb_modeswitch,
	webkitgtk, valgrind, weston, xfsprogs

2018.11-rc2, released November 21th, 2018

	Fixes all over the tree.

	fs: Drop intermediate tarball from the filesystem handling to
	fix an issue with xattrs handling related to fakeroot. Ensure
	tarball target includes xattrs.

	download: Fix confusion in git submodule handling if dl/ is a
	symlink.

	genrandconfig: Fix missing newline in BR2_WGET handling,
	causing the following line to be ignored. This would affect
	BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX, BR2_INIT_SYSTEMD,
	BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV, BR2_STATIC_LIBS or
	BR2_PACKAGE_PYTHON_PY_ONLY depending on the randomization.

	show-build-order: Also include the dependencies of
	rootfs-common.

	Fix a number of build issues in packages for the recently
	merged RISC-V architecture support.

	Updated/fixed packages: dt-utils, easydbus, elfutils,
	flare-engine, flatcc, glibc, gstreamer, gstreamer1, imx-uuc,
	libassuan, libcorrect, libiscsi, libkrb5, libmicrohttpd,
	libnftnl, libnspr, libnss, libsemanage, libsigsegv, libv4l,
	ltp-testsuite, luv, luvi, make, ncmpc, netplug, openocd,
	prosody, qemu, rpm, sconeserver, shadowsocks-libev,
	supertuxcart, syslinux, systemd, trace-cmd, uclibc,
	uclibc-ng-test, vtun, webkitgtk, weston, wireshark, xen,
	xlib_libfontenc

	Issues resolved (http://bugs.uclibc.org):

	#11086: download/git submodule breaks on symlinked dl folder
	#11216: Capabilities not applied to filesystem

2018.11-rc1, released November 9th, 2018

	Fixes all over the tree and new features.

	Architecture: RISC-V support (64bit) added.

	Toolchain: Glibc bumped to 2.28. Fortran support for external
	toolchains. ARM (Linaro) toolchains updated to 8.2-2018.08.

	Hardening flags (RELRO) are now handled by the toolchain
	wrapper instead of explicitly through CFLAGS/LDFLAGS, fixing a
	number of issues.

	Filesystems: Support for creating btrfs and f2fs filesystems
	added.

	Add a number of patches to fix build errors for host utilities
	on modern distributions using glibc-2.28.

	mkusers: Ensure existing group members are preserved when a
	group is reprocessed.

	printvars: Fix issue with exceeding shell command line length
	limits for certain setups.

	Workaround added for incompatibility issues between host-dtc
	and older U-Boot and Linux kernel versions.

	Detect and reject build paths containing '@', as this confuses
	a number of packages, including GCC.

	utils/diffconfig: Make it work for (non-Buildroot) config
	files not using the BR2_ prefix.

	New defconfigs: Amarula a64-relic, Bananapi m2 ultra, Embest
	riotboard, Hardkernel Odroid XU-4, QEMU riscv64-virt.
	olimex_a20_olinuxion_lime_mali is renamed to _legacy.

	OpenCL infrastructure support added, similar to how OpenGL is
	handled.

	Linux-headers: Support for kernel headers from a custom
	tarball / git repo added.

	New packages: bird, bluez5_utils-headers, btrfs-progs,
	checksec, davici, duktape, ell, haproxy, libclc, libcorrect,
	libopencl, libopenresolv, nss-myhostname,
	perl-apache-logformat-compiler, perl-appconfig,
	perl-astro-suntime, perl-class-inspector, perl-class-load,
	perl-class-method-modifiers, perl-class-std,
	perl-class-std-fast, perl-cookie-baker, perl-data-dump,
	perl-data-optlist, perl-data-uuid, perl-data-manip,
	perl-dbd-mysql, perl-dbi, perl-devel-globaldestruction,
	perl-devel-stacktrace, perl-devel-stacktrace-ashtml,
	perl-device-serialport, perl-dist-checkconflicts,
	perl-exporter-tiny, perl-file-sharedir, perl-file-slurp,
	perl-filesys-notify-simple, perl-hash-multivalue,
	perl-http-entity-parser, perl-http-headers-fast,
	perl-http-multipartparser, perl-io-interface,
	perl-io-socket-multicast, perl-json-maybexs, perl-mime-tools,
	perl-module-implementation, perl-module-runtime, perl-moo,
	perl-number-bytes-human, perl-package-stash, perl-params-util,
	perl-plack, perl-posix-strftime-compiler, perl-role-tiny,
	perl-streams-buffered, perl-sub-exporter-progressive,
	perl-sub-install, perl-sub-quote, perl-sys-cpu,
	perl-sys-meminfo, perl-sys-mmap, perl-time-parsedate,
	perl-type-tiny, perl-www-form-urlencoded, perl-x10, pigpio,
	python-async-timeout, python-falcon, python-fire,
	python-mimeparse, python-multidict, python-passlib,
	python-pigpio, python-pip, python-ply, python-py,
	python-pyasn1, python-pyasn1-modules, python-pycryptodomex,
	python-pyhamcrest, python-pysmi, python-scapy, python-semver,
	python-serial-asyncio, python-typing, python-uvloop,
	pythonwrapt, python-yarl, python-zeroconf, riscv-pk, sedutil,
	spandsp, tini, waffle, xapian

	Removed packages: bootutils, dsp-tools, expedite, gst-dsp,
	xloader

	Issues resolved (http://bugs.uclibc.org):

	#11116: Buildroot should set PYTHON_EGG_CACHE instead of writing ..
	#11156: In python3 module 'socket' has no attribute 'AF_BLUETOOTH'
	#11166: Erlang bad argument on valid uint64 when crosscompiled on..
	#11206: zlib: fails to build with Linaro toolchain, BR2_RELRO_FULL..
	#11241: ACPID shouldn't depend on BR2_x86_64 || BR2_i386
	#11251: Util scanpypi failes when package change - to _ in tar file
	#11266: qt5base-5.11.1 does not compile with musl, complains about..
	#11286: python-rpi-gpio only should depend on BR2_arm || BR2_aarch64
	#11321: Latest master fails to build readline with RELRO FULL
	#11326: sysvinit fails to build in latest GIT master
	#11331: Internal application no longer builds with latest GIT master
	#11336: nfs-utils fails to build in latest GIT master
	#11351: build root-2018-08, linaro aarch64 compile error
	#11376: mdmon binary missing
	#11391: Valgind availability on ARM
	#11396: uboot environment image checksum invalid if target is big endian
	#11421: GCC error message for ARM Cortex-A9/ARM.V7
	#11451: Can't find libmpfr.so.4 when using external toolchain on ubuntu..
	#11481: Docs: Is external.desc required?

2018.08.4, Released December 20th, 2018

	Important / security related fixes.

	Defconfigs: Fixes for ci20, orangepi zero plus 2

	Download wrapper: Fix for urlencode handling

	Updated/fixed packages: c-ares, dante, docker-compose,
	domoticz, freetype, ghostscript, gnutls, libcurl, libgpgme,
	libid3tag, libiscsi, libmpd, libopenssl, liboping, libpjsip,
	linux-firmware, liquid-dsp, luvi, lynx, msgpack, nginx,
	nodejs, php, popt, pps-tools, prosody, python-numpy,
	python-requests, samba4, sdl2_net, squashfs, swupdate,
	systemd, uclibc, vte, webkitgtk, wine, xfsprogs

	Issues resolved (http://bugs.uclibc.org):

	#11426: pps-tools bash dependency

2018.08.3, Released November 26th, 2018

	Important / security related fixes.

	fs: Drop intermediate tarball from the filesystem handling to
	fix an issue with xattrs handling related to fakeroot. Ensure
	tarball target includes xattrs.

	download: Fix confusion in git submodule handling if dl/ is a
	symlink.

	toolchain: Only allow enabling stack protection on
	architectures with control flow integrity (CFI) support. Only
	allow FORTIFY_SOURCE support on gcc >= 6.

	genrandconfig: Fix missing newline in BR2_WGET handling,
	causing the following line to be ignored. This would affect
	BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX, BR2_INIT_SYSTEMD,
	BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV, BR2_STATIC_LIBS or
	BR2_PACKAGE_PYTHON_PY_ONLY depending on the randomization.

	show-build-order: Also include the dependencies of
	rootfs-common.

	Defconfigs: Fixes for Armadeus APF27, imx6sabre, Olimex A20
	olinuxino lime legacy, Orangepi zero plus 2.

	graph-depends: Fix for package names starting with a non-alpha
	character.

	Updated/fixed packages: attr, audit, bind, brotli, busybox,
	dtc, easydbus, elfutils, flare-engine, flatcc, gauche, gcc,
	giflib, gpsd, lcdproc, libcurl, libiscsi, libkcapi, libnfs,
	libnspr, libnss, libsemanage, liburiparser, lighttpd,
	lua-curl, mariadb, mmc, mosquitto, mysql, ncmpc, neardal,
	netplug, network-manager, nfs-utils, nginx, openocd, openswan,
	p11-kit, postgresql, prosody, qemu, qt, rpm, ruby, samba4,
	squid, supertuxkart, systemd, tar, trace-cmd, traceroute,
	twolame, uclibc, usb_modeswitch, vtun, webkitgtk, weston,
	xdriver_xf86-video-geode, xlib_libfontenc, xserver_xorg-server

	Issues resolved (http://bugs.uclibc.org):

	#11086: download/git submodule breaks on symlinked dl folder
	#11481: Docs: Is external.desc required?

2018.08.2, Released October 25th, 2018

	Important / security related fixes.

	Workaround added for incompatibility issues between host-dtc
	and older U-Boot and Linux kernel versions.

	Detect and reject build paths containing '@', as this confuses
	a number of packages, including GCC.

	utils/get-developers: Add -e option for use with git
	send-email.

	utils/diffconfig: Make it work for (non-Buildroot) config
	files not using the BR2_ prefix.

	u-boot: Fix for environment image handling on big endian
	systems.

	Updated/fixed packages: binutils, ca-certificates,
	cups-filters, dtc, erlang, file, freetype, gcc, git, gvfs,
	jasper, leveldb, libarchive, libssh, live555, ljlinenoise,
	mariadb, mongoose, netsnmp, nmap, nodejs, ntp, open-plc-utils,
	poco, psmisc, ptpd2, python-enum34, qemu, qt, qt5base,
	setools, spice, spice-protocol, tinc, ustr, wireshark,

	Issues resolved (http://bugs.uclibc.org):

	#11396: uboot environment image checksum invalid if target is big endian

2018.08.1, Released October 7th, 2018

	Important / security related fixes.

	Add a number of patches to fix build errors for host utilities
	on modern distributions using glibc-2.28.

	mkusers: Ensure existing group members are preserved when a
	group is reprocessed.

	printvars: Fix issue with exceeding shell command line length
	limits for certain setups.

	Updated/fixed packages: acpid, android-tools, apache,
	arp-scan, bandwidthd, bind, brltty, clamav, connman, cppcms,
	domoticz, dtc, fio, gcc, gdb, ghostscript, gnupg, httpping,
	igmpproxy, imlib2, ipsec-tools, libesmtp, libnfs, libxslt,
	links, lua, mosquitto, nilfs-utils, ocrad, parted, php,
	python-django, screen, shairport-sync, strongswan,
	vboot-utils, webkitgtk, wireguard, x265 xen, xlib_libXdmcp,
	xlib_libXfont, xlib_libXft, xlib_libxshmfence,
	xutil_makedepend, zeromq

2018.08, Released September 6th, 2018

	Minor fixes.

	Known issues:

	- Glibc 2.28 on the build host breaks compilation of a number
	  of host packages. 2018.08 contains fixes for some of these
	  packages, but not all. Consider building on hosts (or in
	  containers) using older Glibc versions.

	- host-dtc 1.4.7 breaks compilation of older U-Boot and Linux
          kernel configurations using FDT/DTC. Consider updating the
          Linux kernel to >= 4.17 and U-Boot to >= 2018.07 or
          backporting commit 9130ba8846 (scripts/dtc: Update to
          upstream version v1.4.6-9-gaadd0b65c987) for the Linux
          kernel / commit db405d1980 for U-Boot.
	  Alternatively revert commit 7b929ddcf0 (dtc: bump version to
          1.4.7) and ensure your build host does not have the libfdt
          development headers installed.

	Updated/fixed packages: busybox, chipmunk, cutelyst,
	domoticz, gcc, imagemagick, lcms2, libcurl, mediastreamer,
	moarvm, php, qt, qt5virtualkeyboard, qt5webengine, screen,
	sdl2, squashfs, uboot, xen

	Issues resolved (http://bugs.uclibc.org):

	#11261: ccache using wrong cached objects
	#11276: Understanding the patch for kernel-4.9 and other..

2018.08-rc3, Released August 31th, 2018

	Fixes all over the tree.

	linux: additional improvements to the flex / bison dependency
	handling, use system provided variant if available. Ensure
	toolchain is available when configuring for 4.18+ support.

	Download: Fix handling of primary sites using file://

	Toolchain: Correct external toolchain musl detection for
	static toolchains.

	Updated/fixed packages: aircrack-ng, bison, brltty, busybox,
	cutelyst, dropbear, gr-osmosdr, i2c-tools, json-c, libconfuse,
	libkcapi, libsoup, libssh, liburiparser, mbedtls, mender,
	mesa3d, minicom, mjpegtools, mutt, openpowerlink, openssh,
	oracle-mysql, php, postgresql, pv, qt5base, qt5quickcontrols,
	rauc, shairport-sync, systemd, xlib_libX11, zeromq,

	Issues resolved (http://bugs.uclibc.org):

	#11091: BR2_PRIMARY_SITE doesn't work (wget is selected...
	#11141: WF111 package no longer available
	#11211: Internal compiler error: Killed (program cc1plus)..
	#11236: util-linux fails to build on Travis CI when python..
	#11246: Glibc 2.28 - fails to build host-bison and host-m4
	#11256: Add python-falcon and python-mimeparse packages

2018.08-rc2, Released August 20th, 2018

	Fixes all over the tree.

	pkg-kconfig: Support dependencies needed to run the
	configurator, E.G. recent Linux kernel versions needing flex
	and bison.

	Defconfigs: ARM Juno: Bump ATF to fix a build
	issue. Raspberrypi2: Bump rootfs size. Snps_archs38_vdk:
	Correct /etc/inittab. Technologic ts7680: Correct genimage
	configuration. Orange PI PC / Zero, Sheevaplug: Bump U-boot to
	2018.07 to fix build issue. Ensure host-openssl is pulled in
	for kernel builds where needed.

	Updated/fixed packages: aircrack-ng, bind, boost,
	boot-wrapper-aarch64, bzip2, busybox, chrony, cryptsetup,
	dahdi-tools, dbus, domoticz, eigen, ipsec-tools, libarchive,
	libfuse, libgit2, libopenssl, libselinux, lighttpd, lvm2, m4,
	makedevs, mariadb, mesa3d-headers, mono, ncmpc, ncurses,
	nodejs, php, python-django, python-pyqt5, qt5base,
	qt5serialbus, ruby, samba4, uboot-tools, uclibc, vlc,
	waylandpp, wireless_tools, wireshark, wpa_supplicant, mtd,
	xdriver_xf86-video-ati, xserver_xorg-server

	Issues resolved (http://bugs.uclibc.org):

	#10781: cryptsetup luksOpen container_file container causes..
	#10996: bogus musl ARM toolchain
	#11191: xattr and check-package issue

2018.08-rc1, Released August 5th, 2018

	Toolchain:

	- add support for gcc 8.x, switch to gcc 7.x as the default
	  version
	- add support for gdb 8.1, switch to gdb 8.0 as the default
	  and remove gdb 7.10/7.11
	- add support for binutils 2.31
	- NIOSII CodeSourcery toolchain updated
	- Linaro AArch64 BE toolchain added, and other Linaro
	  toolchains updated
	- Synopsys ARC pre-built toolchain updated

	Architecture: add support for ARM Cortex-M7

	Major updates:

	- systemd bumped to 239
	- Qt5 bumped to 5.11.1
	- Rust bumped to 1.27
	- GStreamer stack bumped to 1.14.2
	- X.org server bumped to 1.20, and all X.org proto packages
	  replaced by the single xorgproto package
	- i.MX6 support packages bumped to 6.2.4
	- i.MX Vivante graphics version bumped to 6.2.4.p1.2,
	  adding support for Wayland and i.MX8MQ platforms

	Linux: bumped to 4.17 by default.

	Infrastructure: new package infrastructure added for packages
	using the Meson build system

	New packages: at-spi2-atk, at-spi2-core, capnproto, cmocka,
	corkscrew, cutelyst, davfs2, flatcc, libidn2, libgit2,
	libopusenc, mender, nghttp2, perl-convert-asn1, perl-crypt-blowfish,
	perl-crypt-cbc, perl-digest-md5, perl-mime-base64-urlsafe,
	perl-mojolicious-plugin-authentication, perl-net-ping,
	perl-net-snmp, perl-net-ssh2, perl-net-telnet, pigz,
	python-reentry, python-request-id, python-validators,
	python-webob, shadowsocks-libev, speexdsp, xorgproto, wampcc

	New defconfigs: NXP i.MX7D SDB, Boundary Devices Nitrogen 8M,
	Olimex A10 OLinuxino, ZynqMP ZCU106

	Removed packages: all xproto_* have been removed and replaced
	by xorgproto

	Issues resolved (http://bugs.uclibc.org):

	#9411:	MUSL build with RT Error relocating /lib/libgcc_s.so.1:
		__cpu_indicator_init: symbol not found
	#9921: lockfile module within python-daemon not	 available
	#10341: gdb install of py files when using buildroot toolchain
		includes build path
	#10661: /etc/init.d/S29netplug starts multiple	instances of netplugd
	#10751: Missing dependency in pulseaudio package
	#10811: kodi-17.6-Krypton does not compile for	freescale_* devices
	#10856: openblas on qemu_x86_64_defconfig fails with
		"sgemm_kernel.o: No such file or directory"
	#11056: Compiling a file that uses libdrm headers fails with:
		fatal error: drm.h: No such file or directory
	#11061: support/download: git version=master broken
	#11071: Building postgresql package on Debian 9.4  x64 for armel target fails
	#11076: Docker containerd installed to incorrect  path
	#11101: host-patchelf Endian Issue with relative  RPATH
	#11111: raspberry pi 3 b+: missing BSP for 64-bit  kernel
	#11121: statfs call corrupts memory struct statfs  too small
	#11181: Switching toolchain does not work

2018.05.3, Released October 6th, 2018

	Important / security related fixes.

	Add a number of patches to fix build errors for host utilities
	on modern distributions using glibc-2.28.

	mkusers: Ensure existing group members are preserved when a
	group is reprocessed.

	printvars: Fix issue with exceeding shell command line length
	limits for certain setups.

	Updated/fixed packages: acpid, android-tools, apache,
	arp-scan, bandwidthd, bind, bison, brltty, chipmunk, connman,
	cppcms, fio, gcc, ghostscript, gnupg, httping, igmpproxy,
	imagemagick, imlib2, ipsec-tools, lcm2, libcurl, libesmtp,
	libnfs, libssh, libxslt, links, mediastreamer, minicom,
	moarvm, nilfs-utils, ocrad, parted, php, postgresql, pv,
	python-django, qt, qt5quickcontrols, qt5webengine, screen,
	sdl2, shairport-sync, squashfs, strongswan, vboot-utils,
	webkitgtk, wireguard, x265, xen, xlib_libXfont, xlib_libXft,
	xlib_libxshmfence, zeromq

2018.05.2, Released August 28th, 2018

	Important / security related fixes.

	Defconfigs: Raspberrypi2: Bump rootfs size, T7680: Fix
	genimage.cfg issue, ARM Juno: Bump ATF to v1.3 to fix build
	issue.

	Updated/fixed packages: acl, attr, apache, bind,
	boot-wrapper-aarch64, brltty, bzip2, chrony, crda, cryptsetup,
	dahdi-tools, dmidecode, dropbear, eigen, ffmpeg, gawk, gcc,
	ghostscript, gnutls, imx-gpu-viv, ipsec-tools, libarchive,
	libfuse, libglib2, libopenssl, libselinux, libsoup, lighttpd,
	linuxptp, lttng-modules, lttng-tools, lua-flu, lvm2, m4,
	makedevs, mariadb, mbedtls, mesa3d-heders, mtd, ncurses,
	nodejs, openssh, php, python-django, rauc, ruby, samba4,
	stress-ng, ti-utils, uboot-tools, uclibc, vim, waylandpp,
	wireless_tools, wireless-regdb, wireshark, wpa_supplicant,
	xorriso, znc

	Issues resolved (http://bugs.uclibc.org):

	#10781: cryptsetup luksOpen container_file container causes..
	#10986: Installing package attr when already supplied by..
	#11191: xattr and check-package issue

2018.05.1, Released July 20th, 2018

	Important / security related fixes.

	U-Boot: Ensure host version of ncurses is picked up and not
	host-ncurses built by buildroot, as that otherwise causes