Previously, there was no indication to the user that a FIT image was
successfully created after executing mkimage.  For example:

  $ mkimage -f uImage.its uImage.itb
  DTC: dts->dtb  on file "uImage.its"

Adding some additional output after creating a FIT image lets the user
know exactly what is contained in their image, eg:

  $ mkimage -f uImage.its uImage.itb
  DTC: dts->dtb  on file "uImage.its"
  FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty
  Created:         Tue Nov 24 15:43:01 2009
   Image 0 (kernel@1)
    Description:  Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty
    Type:         Kernel Image
    Compression:  gzip compressed
    Data Size:    2707311 Bytes = 2643.86 kB = 2.58 MB
    Architecture: PowerPC
    OS:           Linux
    Load Address: 0x00000000
    Entry Point:  0x00000000
    Hash algo:    crc32
    Hash value:   efe0798b
    Hash algo:    sha1
    Hash value:   ecafba8c95684f2c8fec67e33c41ec88df1534d7
   Image 1 (fdt@1)
    Description:  Flattened Device Tree blob
    Type:         Flat Device Tree
    Compression:  uncompressed
    Data Size:    12288 Bytes = 12.00 kB = 0.01 MB
    Architecture: PowerPC
    Hash algo:    crc32
    Hash value:   a5cab676
    Hash algo:    sha1
    Hash value:   168722b13e305283cfd6603dfe8248cc329adea6
   Default Configuration: 'config@1'
   Configuration 0 (config@1)
    Description:  Default Linux kernel
    Kernel:       kernel@1
    FDT:          fdt@1

This brings the behavior of creating a FIT image in line with creating a
standard uImage, which also prints out the uImage contents after
creation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

The FIT fit_set_header() function was copied from the standard uImage's
image_set_header() function during mkimage reorganization.  However, the
fit_set_header() function is not used since FIT images use a standard
device tree blob header.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

When building a Flattened Image Tree (FIT) the image type needs to be
"flat_dt".  Commit 89a4d6b1 introduced a
regression which caused the user to need to specify the "-T flat_dt"
parameter on the command line when building a FIT image.  The "-T
flat_dt" parameter should not be needed and is at odds with the current
FIT image documentation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

extfs.c assumes that there is always a valid inode_size field in the
superblock. But this is not true for ext2fs rev 0. Such ext2fs images
are for instance generated by genext2fs. Symptoms on ARM machines are
messages like: "raise: Signal # 8 caught"; on PowerPC "ext2ls" will
print nothing.
This fix checks for rev 0 and uses then 128 bytes as inode size.

Signed-off-by: Michael Brandt <Michael.Brandt@emsyso.de>
Tested on: TQM5200S
Tested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>

A small number of common/cmd_*.c files contain preprocessor tests that
are apparently superfluous since those same tests are used in the
Makefile to control the compilation of those files.  Those tests are
clearly redundant as long as they surround the entirety of the source
in those files.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

Bring the directory listing more into line with current content.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

There is some dead code enclosed by #if 0 .... #endif in the file
common/cmd_i2c.c
This patch removes the dead code.

Signed-off-by: Pratap Chandu <pratap.rrke@gmail.com>

Since the Makefile now controls the compilation of this, there is no need
for CONFIG checking nor the stub function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

cmd_irq.c is a much better home and it is already conditionally
compiled based on CONFIG_CMD_IRQ.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

cmd_license is already conditionally compiled at the Makefile-level.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

circbuf could be used as a generic library and is only currently
needed when CONFIG_USB_TTY is defined.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

Some versions of 'make' do not handle trailing white-spaces
properly. Trailing spaces in ELF causes a 'fake' source to
be added to the variable COBJS; leading to build failure
(listed below). The problem was found with GNU Make 3.80.

Using text-function 'strip' as a workaround for the problem.

make[1]: Entering directory `/home/sanjeev/u-boot/examples/standalone'
arm-none-linux-gnueabi-gcc -g  -Os   -fno-common -ffixed-r8 -msoft-float
-D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanjeev/u-boot/include
-fno-builtin -ffreestanding -nostdinc -isystem /opt/codesourcery/2009q1-
203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/include -pipe  -DCONFIG_
ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-interwork -march=armv5
-Wall -Wstrict-prototypes -fno-stack-protector -g  -Os   -fno-common -ff
ixed-r8 -msoft-float   -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanje
ev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/co
desourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/includ
e -pipe  -DCONFIG_ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-inte
rwork -march=armv5 -I.. -Bstatic -T u-boot.lds  -Ttext 0x80e80000 -o .c
arm-none-linux-gnueabi-gcc: no input files
make[1]: *** [.c] Error 1
make[1]: Leaving directory `/home/sanjeev/u-boot/examples/standalone'
make: *** [examples/standalone] Error 2
premi #

Signed-off-by: Sanjeev Premi <premi@ti.com>

Fixed typo (s/ElF/ELF/).
Signed-off-by: Wolfgang Denk <wd@denx.de>

A bunch of the 85xx boards have this cruft in them - it's not used
anywhere.  Delete it.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Becky Bruce <beckyb@kernel.crashing.org>

The example FIT image source files do not compile with the latest dtc and
mkimage. The following error message is produced:

DTC: dts->dtb  on file "kernel.its"
Error: kernel.its 7:0 - 1:0 syntax error
FATAL ERROR: Unable to parse input tree
./mkimage: Can't read kernel.itb.tmp: Invalid argument

The FIT image source files are missing the "/dts-v1/;" directive at the
beginning of the file. Add the directive to the examples.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>

The img2srec code creates a lot of typedefs with common names.  These
easily clash with system headers that include these typedefs (like mingw).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Refuse to setup a platform if the command line ARCH= is not the same
as the one required for the board. This prevents any user with
prehistoric aliases from messing up their builds.

Reported in thread:
http://old.nabble.com/-U-Boot--Build-breaks-on-some-OMAP3-configs-to26132721.html

Inputs from: Mike Frysinger and Wolfgang Denk:
http://lists.denx.de/pipermail/u-boot/2009-November/063642.html



Cc: Wolfgang Denk <wd@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

'netretry = once' does the same as 'netretry = yes', because it is not stored
when it was tried once.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Signed-off-by: Remy Bohmer <linux@bohmer.net>

When the board is booted without serial cable attached (which
is how most of them will be used) UART RX is left floating and
sometimes picks noise, which interrupts countdown and enters
U-Boot prompt instead of booting the kernel.

Fix this by setting up internal pullup on UART RX pin. This
does not prevent serial from working as the internal pullup
is weak.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>

The only missing chipselect line support is CS2, and I need it on
CS2...

Signed-off-by: Remy Bohmer <linux@bohmer.net>

mkimage does not build due to missing strtok_r() and getline() implementation

Signed-off-by: Remy Bohmer <linux@bohmer.net>

The type is not set for generation of the FIT images, resulting
in no images being created without printing or returning an error

Signed-off-by: Remy Bohmer <linux@bohmer.net>

	missing cache flush.

    Added instruction and data caches flush.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>

Signed-off-by: Scott McNutt <smcnutt@psyent.com>

	the standalone examples.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>

Reported-by: Peter Gombos <gombos@protecta.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Jason McMullan <jason.mcmullan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Tested-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>

Edited commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>