The iteration limit is passed to mtest as a fourth parameter:
[start [end [pattern [iterations]]]]
If no fourth parameter is supplied, there is no iteration limit and the
test will loop forever.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>

Moved driver vcth.c to vct.c to better reflect the VCT board series.
This driver is now used by the VCT platforms:

vct_premium
vct_platinum
vct_platinumsvc

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
!CONFIG_AUTOBOOT_KEYED case.

Do this by reversing the loop so we do at least one iteration before
checking for timeout.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

Generic i386 reset - #define made redundant by weak function

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

CONFIG_SC520 is now used for conditional compile

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

Reset function specific to AMD SC520 microcontroller - Is more of a
'hard reset' that the triple fault.

Requires CONFIG_SYS_RESET_SC520 to be defined in config

I would have liked to add this to a new file (cpu/i386/sc520/reset.c)
but ld requires that a object file in a library arhive MUST contain
at least one function which does not override a weak function (and is
called from outside the object file) in order for that object file to
be extracted from the archive. This would be the only function on the
new file, and hence, will never get linked in.

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

Moved from interrupts.c to cpu.c and made into a weak function to
allow vendor specific override

Vendor specific CPU reset (like the AMD SC520 MMCR reset) can now be
added to the vendor specific code without the need to remember to
#undef usage of the generic method and if you forget to include your
custom reset method, you will always get the default.

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

This allows for future tidy ups and functionality that will require
set_vector ()

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Brings i386 in line with other CPUs with a reset vector and frees up reset.c
for CPU reset functions

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

Right now this is only used by keymile.

Signed-off-by: Gary Jennejohn <garyj@denx.de>

This patch extracts the identical config options for the
keymile boards mgcoge, mgsuvd and kmeter1 in a new
common config file keymile-common.h.

Signed-off-by: Heiko Schocher <hs@denx.de>

Check the presence of the PIGGY on the keymile boards mgcoge,
mgsuvd and kmeter1. If the PIGGY is not present, dont register
this Ethernet device.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>

This patch adds support for the kmeter1 board from Keymile,
based on a Freescale MPC8360 CPU.

- serial console on UART 1
- 256 MB DDR2 RAM
- 64 MB NOR Flash
- Ethernet RMII Mode over UCC4
- PHY SMSC LAN8700

Signed-off-by: Heiko Schocher <hs@denx.de>

Add a do_div() wrapper, lldiv(). The new inline function doesn't modify
the dividend and returns the result of division, so it is useful
in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Error with CONFIG_NAND_LEGACY in common/cmd_nand.c:
With current code "nand read.jffs2s" (read and skip bad blocks) is always interpreted as
"nand read.jffs2" (read and fill bad blocks with 0xff). This is because ".jffs2" is
tested before ".jffs2s" and only the first two characters are compared.

Correction:
Test for ".jffs2s" first and compare the first 7 characters.

Signed-off-by: Scott Wood <scottwood@freescale.com>

This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
changes the default from 8 to 1 for the legacy and the new MTD
NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
in the board config files because none of the boards use multi
chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
define

 #define NAND_MAX_CHIPS          CONFIG_SYS_MAX_NAND_DEVICE

but that's bogus and did not work anyhow.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

We load the secondary stage u-boot image from NAND to
system memory by nand_load, but we did not flush d-cache
to memory, nor invalidate i-cache before we jump to RAM.
When the system has cache enabled and the TLB/page attribute
of system memory is cacheable, it will cause issues.

- 83xx family is using the d-cache lock, so all of d-cache
  access is cache-inhibited. so you can't see the issue.
- 85xx family is using d-cache, i-cache enable, partial
  cache lock. you will see the issue.

This patch fixes the cache issue.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Enable nand lock, unlock and status of lock feature.
Not every device and platform requires this, hence,
it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK

Nand unlock and status operate on block boundary instead
of page boundary. Details in:
http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT



Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
Includes preliminary suggestions from Scott Wood

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Rather than putting the function prototype for board_nand_init() in the one
place where it gets called, put it into nand.h so that every place that also
defines it gets the prototype.  Otherwise, errors can go silently unnoticed
such as using the wrong return value (void rather than int) when defining
the function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>

- Add subpage write support
- Add onenand_oob_64/32 ecclayout

This has been missing and without it UBI has some incompatibilies issues
with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
placed differently (2048 instead of 512) without this fix.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Add missing markbad function
If not, it's hang when it entered the mtd->mark_bad().

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Update OneNAND command to support bad block awareness.
Also change the OneNAND command style to better match the
NAND version.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>

The version (ver_id) was not stored in the onenand_chip structure and
because of this the continuous locking scheme could be enabled on some
chips.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Dave Liu <daveliu@freescale.com>

Sync with OneNAND kernel codes

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

in systems which are configured without flash

Signed-off-by: Michal Simek <monstr@monstr.eu>