corstone1000: add SDCard support

See merge request !6

This change is to pass commandline argument to pass
path and alone with name of the image to boot on FVP SDcard

Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>

These options updated:

board.flash0
board.hostbridge.userNetworking
disable_visualisation
se.nvm.update_raw_image

Change-Id: I1a21373f3a720c2aa698ee0274b4f86bc0957856
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>

Add initial model startup support for Corstone1000 platform. This
supports setting up the model parameters for booting.

Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>

Introduce TC1 platform

See merge request arm-reference-solutions/model-scripts!4

This includes the run-script for TC1 platform for running
poky, android-nano and android-swr distro.

Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I1da8dffc6e78f114ad994e5ee9dbb7df1b807466

platforms/tc0: Update run_model.sh script

See merge request arm-reference-solutions/model-scripts!2

Signed-off-by: Anders Dellien <anders.dellien@arm.com>

platforms/tc0: adding tc0 run_model.sh script

See merge request arm-reference-solutions/model-scripts!1

Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>

Aditya Angadi authored Dec 16, 2020 and Thomas Abraham committed Dec 18, 2020

Reference Design platform RD-Daniel-ConfigXLR has been renamed to
RD-V1-MC. Correspondingly, remove all uses of 'rddanielxlr' and replace
it with rdv1mc where appropriate.

Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I1077606771830ad39b5b35017f323e69324a506a

Aditya Angadi authored Dec 16, 2020 and Thomas Abraham committed Dec 18, 2020

Reference Design platform RD-Daniel has been renamed to RD-V1.
Correspondingly, remove all uses of 'rddaniel' and replace it with rdv1
where appropriate.

Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I3aa46017998bf376736c1d4db364dd0386e9c481

Vijayenthiran Subramaniam authored Nov 27, 2020 and Thomas Abraham committed Nov 27, 2020

When $AUTOMATE is true (-j true), boot.sh script parses the console with
a timeout of 7200 seconds (2 hours). Busybox boot generally doesn't take
2 hours to complete. Reduce the timeout to 5 minutes from 2 hours so
that when the busybox boot doesn't reach till the console prompt,
parsing waits for only 5 minutes before killing the model. This results
in better utilization of jenkins jobs.

Change-Id: I3ddfe551602f5326ef8e201aa12537a1fdf03aae
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Vijayenthiran Subramaniam authored May 06, 2020 and Thomas Abraham committed Nov 27, 2020

Set unbuffered_output to true for SCP and MCP uart consoles. This will
write to the log file immediately instead of waiting for the model to
quit. This solves the partial scp and mcp logs issue when -j (AUTOMATE)
is set to true where the model is killed through SIGTERM signal when the
test is completed.

Change-Id: I8f6ac039bdc1393b494afd2d0f6d990c9935787c
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

All the platforms have virtio.net enabled on them. So the use of
SMSC Lan91x controller can be removed.

Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: Ie1a74a273bd380f971fa260b28c18bb7f6aa2ec8

Add initial model startup support for RD-N2 platform. This supports
busybox and distro boot tests.

Change-Id: I04d18236107e622b81f59efa649f421454578671
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

RD-Daniel platform can be validated using ACS test suite. So enable
usability of this script on RD-Daniel platform.

Change-Id: Ie73a6ed88f13d71c6b49666de80e516e7cb08c5b
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>

Vijayenthiran Subramaniam authored Oct 04, 2020 and Thomas Abraham committed Oct 04, 2020

Disable use of multithreading for Distributed GIC Intergace (DGI)
transactions in GIC multichip use cases. This will dnable sending
multichip DGI messages in a separate thread. This patch affects
only the multi-chip plaforms - rdn1edgex2 and rddanielxlr.

Change-Id: I6414f53f2341d0d5da3545a5274ad5e5f1dc3fc6
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Vijayenthiran Subramaniam authored Sep 29, 2020 and Thomas Abraham committed Oct 04, 2020

Rename `cmn_rhodes` parameter to `cmn_650` to align with the model
changes. This patch affects only the platforms that use CMN-Rhodes,
which are rddaniel and rddanielxlr.

Change-Id: I5219bab60ebe9035aae29c4c3b9e62eabf9b264b
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Vivek Kumar Gautam authored Sep 29, 2020 and Thomas Abraham committed Oct 04, 2020

To adapt to the updated PCIe topolofy, set the number of bits supported
for ITS device IDs to 20.

Change-Id: I147ba0c4e530336d19640a8b3c056fce2660463f
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>

Vivek Kumar Gautam authored Sep 22, 2020 and Thomas Abraham committed Oct 04, 2020

Due to the changes in the PCIe topology supported by the FVP, the
parameter names of the AHCI controller connected over the PCIe have
changed. Adapt to those changes.

Change-Id: I9e9cdc925fe286cf9fb6fc7156bab133b837c3a3
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>

Vijayenthiran Subramaniam authored Jul 23, 2020 and Thomas Abraham committed Oct 04, 2020

The location of the RNSAM (internal or externa) can be specified using
model parameters. Due to changes in the names of the model parameters
used to specify the location of the RNSAM, adapt the model launch
scripts for the same.

Change-Id: Ia2f61b4d17264df0a2ab9149d2ca998b51521c7b
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

For the keyboard inputs to be functional in the WinPE Special
Administration Console (SAC), enable the hardware flow control
and DC4 commands only for the UART port that used as the WinPE
SAC display.

Change-Id: Ieb7ad25472d75e1852a0e4a0b252ab5099e64cc4
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Aditya Angadi authored Apr 07, 2020 and Thomas Abraham committed Apr 08, 2020

Enable uefi tests for rddanielxlr

Change-Id: I4f2cfb7f45c828909e2e06bb9da14992cb8bf5c7
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Aditya Angadi authored Apr 07, 2020 and Thomas Abraham committed Apr 08, 2020

Enable busy box boot test for rddanielxlr platform.

Change-Id: I5ec1ea67b1359e7579fe10a45ced2aa192a8df6a
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Aditya Angadi authored Apr 07, 2020 and Thomas Abraham committed Apr 08, 2020

Add run_model script for RD-DanielXLR platform for busybox boot test.

Change-Id: Ic52e3d66fa70364cb8888eb1de7d65451ba9ff94
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Allow distro boot test on RD-Daniel Config-M platforms by including
the platform name 'rddaniel' in the list of platform supported.

Change-Id: I53c278c274f755e3fcd46d487914e247597701f8
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

The model flag FASTSIM_CMN600_INTERNAL_RNSAM has been renamed as
FASTSIM_CMN_INTERNAL_RNSAM. Update the run model script
accordingly.

Change-Id: I5f8dd22e4e7d097c84b1c7ff9575d616d2ecbafc
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Lokesh B V authored Dec 27, 2019 and Thomas Abraham committed Apr 07, 2020

Fix bugs related handling of the model binary path, passing the correct
set of model parameters and handling model launch failuers. While at it,
refactor the handling of parameters for handling automated runs.

Change-Id: Idd014394a0804ac7dbae890a9adff4801b0c7f9e
Signed-off-by: Lokesh B V <lokesh.bv@arm.com>

Lokesh B V authored Dec 27, 2019 and Thomas Abraham committed Apr 07, 2020

Fix bugs related handling of the model binary path, passing the correct
set of model parameters and handling model launch failuers. While at it,
refactor the handling of parameters for handling automated runs.

Change-Id: I4dcb66dbe43e00d8b18866da3b92bdbd1f5b725d
Signed-off-by: Lokesh B V <lokesh.bv@arm.com>

Lokesh B V authored Dec 27, 2019 and Thomas Abraham committed Apr 07, 2020

Fix bugs related handling of the model binary path, passing the correct
set of model parameters and handling model launch failuers. While at it,
refactor the handling of parameters for handling automated runs.

Change-Id: I63a8e3530b689b57ff63ad8708022df8e94d69f6
Signed-off-by: Lokesh B V <lokesh.bv@arm.com>

Lokesh B V authored Dec 26, 2019 and Thomas Abraham committed Apr 07, 2020

Fix bugs related handling of the model binary path, passing the correct
set of model parameters and handling model launch failuers. While at it,
refactor the handling of parameters for handling automated runs.

Change-Id: Ia67db0713cc39df1e808c7328efe3108aaf58110
Signed-off-by: Lokesh B V <lokesh.bv@arm.com>

Lokesh B V authored Dec 23, 2019 and Thomas Abraham committed Apr 07, 2020

Fix bugs related handling of the model binary path, passing the correct
set of model parameters and handling model launch failuers. While at it,
refactor the handling of parameters for handling automated runs.

Change-Id: I4c66a732f58a6e9225048f1e7d80350d51cab6c8
Signed-off-by: Lokesh B V <lokesh.bv@arm.com>

Lokesh B V authored Dec 16, 2019 and Thomas Abraham committed Apr 07, 2020

By default, TZC blocks all the accesses to DRAM. So setup the model
parameters required to bypass the TZC for all memory accesses. This
patch should be reverted when firmware (tf-a) supports the required
configuration for TZC during boot.

Change-Id: Ieebb67f741fe5fa2e1096b6249aff1ae27c126cf
Signed-off-by: Lokesh B V <lokesh.bv@arm.com>

Aluvala Sai Akhilesh authored Oct 23, 2019 and Thomas Abraham committed Dec 27, 2019

RD-E1-Edge platform can be validated using ACS test suite. So enable
usability of this script on RD-E1-Edge platform.

Change-Id: I96b767f8a1ff89ddb7df1a3d3685b2c985d057ab
Signed-off-by: Aluvala Sai Akhilesh <aluvala.saiakhilesh@arm.com>

Vijayenthiran Subramaniam authored Oct 23, 2019 and Thomas Abraham committed Dec 27, 2019

Enable busybox boot test for RD-N1-Edge dual chip platform.

Change-Id: Ib2424d578c17a00e2817a15527c152b8760384b5
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Vijayenthiran Subramaniam authored Oct 23, 2019 and Thomas Abraham committed Dec 27, 2019

Add initial model startup support for RD-N1-Edge dual-chip platform. This
supports setting up the model parameters for booting both the chips.

Change-Id: I78003afc03daf223f84acf427b5e647adc62e413
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Enable uefi boot test for RD-Daniel platform.

Change-Id: Ida73fe8f96a5c6de88ac27e398217250be30a916
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Enable busybox boot test for RD-Daniel platform.

Change-Id: I5521ce8d8d76760b31891cf130d65ac9d8bf0029
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

Add initial model startup support for RD-Daniel platform. This supports
busybox and uefi boot tests.

Change-Id: Ia55bd2b59f17b866ceccd12e826230a4d65c0eb1
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>