- Oct 07, 2021
-
-
Bernd Kuhls authored
Changelog: https://github.com/libass/libass/blob/master/Changelog Signed-off-by:
Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by:
Peter Korsgaard <peter@korsgaard.com>
-
Bernd Kuhls authored
Changelog: https://github.com/kornelski/pngquant/blob/master/CHANGELOG Signed-off-by:
-
Bernd Kuhls authored
Changelog: https://www.php.net/ChangeLog-8.php#8.0.11 Fixes CVE-2021-21706: https://bugs.php.net/bug.php?id=81420 Signed-off-by:
-
- Oct 06, 2021
-
-
Edgar Bonet authored
Traditional VT-10x terminals (and their emulators) [0] have a "magic margins" feature that enables the last character position to be updated without scrolling the screen: whenever a character is printed on the last column, the cursor stays over the character, instead of moving to the next line. The Busybox shell, ash, attempts to defeat this feature by printing CR,LF right after echoing a character to the last column.[1] This doesn't play well with emulator.py. The run() method of the Emulator class captures the output of the emulated system and assumes the first line it reads is the echo of the command, and all subsequent lines are the command's output. If the line made by the command + shell prompt is longer than 80 characters, then it is echoed as two or more lines, and all but the first one are mistaken for the command's output. We fix this by telling the emulated system that we are using an ultra-wide terminal with 29999 columns. Larger values would be ignored and replaced by the default, namely 80 columns.[2] [0] https://vt100.net/docs/vt100-ug/chapter3.html - DECAWM [1] https://git.busybox.net/busybox/tree/libbb/lineedit.c?h=1_34_0#n412 [2] https://git.busybox.net/busybox/tree/libbb/xfuncs.c?h=1_34_0#n258 Signed-off-by:
Edgar Bonet <bonet@grenoble.cnrs.fr> Reported-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Co-authored-by:
Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by:
-
Maxim Kochetkov via buildroot authored
Release-notes: https://git.osgeo.org/gitea/postgis/postgis/raw/tag/3.1.4/NEWS Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
-
Joachim Wiberg authored
Signed-off-by:
Joachim Wiberg <troglobit@gmail.com> [Arnout: keep the shellcheck comments] Signed-off-by:
-
Joachim Wiberg authored
- Upstream has .sha256 checksum files, drop redundant .md5 checksum - Backport upstream patch to silence bogus error message for loopback - SMCRoute is useless w/o kernel support, use same fixups as mrouted Signed-off-by:
-
Fabrice Fontaine authored
Fix the following build failure without wchar raised since bump to version 0.12.0 in commit 83a0e8de: /home/buildroot/autobuild/instance-0/output-1/build/log4cxx-0.12.0/src/main/include/log4cxx/helpers/transcoder.h:113:33: error: 'wstring' in namespace 'std' does not name a type 113 | static void decode(const std::wstring& src, LogString& dst); | ^~~~~~~ Fixes: - http://autobuild.buildroot.org/results/7d0297b071df06bc312b9927396021aa6fe401f4 Signed-off-by:
Fabrice Fontaine <fontaine.fabrice@gmail.com> Signed-off-by:
-
Fabrice Fontaine authored
Fix the following build failure without stack-protector raised since bump to version 0.11.0 in commit c3a907a7: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: usbredirparser/libusbredirparser.so.1.1.0.p/usbredirparser.c.o: in function `va_log': usbredirparser.c:(.text+0x1c4): undefined reference to `__stack_chk_guard' Fixes: - http://autobuild.buildroot.org/results/40de5443e98157ad50c6841ea70a835cd5ad4fe9 Signed-off-by:
-
Fabrice Fontaine authored
libnl tools is needed since bump to version 0.9.4 in commit 5cae1a0d and https://github.com/uoaerg/wavemon/commit/2a22c3dac0675c1d8985263c1a5b62d0a0f9a5e6 to avoid the following build failure: checking for LIBNL3_CLI... no configure: error: need libnl-cli-3.0 >= 3.2 Fixes: - http://autobuild.buildroot.org/results/3e5886e2c96c92e9626b2f6b2cd2b8f43c06da2e Signed-off-by:
-
Fabrice Fontaine authored
Fix the following build failure with gcc 4.8 raised since bump of php-gnupg to version 1.5.0 in commit 20ecd9c9 and https://github.com/bukka/phpc/commit/8b5b1e718fbb2ba57102d1e9d844938038df310c: .libs/gnupg_keylistiterator.o: In function `_phpc_res_close': gnupg_keylistiterator.c:(.text+0x2d4): multiple definition of `_phpc_res_close' Fixes: - http://autobuild.buildroot.org/results/d79/d79bc1b0f98d68eb8a7fe7d86af5ddcc75e42507/build-end.log Signed-off-by:
-
James Hilliard authored
This has a compile time dependency on gst1-plugins-bad due to the codecparsers dependency. We need to prevent the wpe plugin from being selected when wpewebkit media-stream support is enabled as the wpe plugin requires wpewebkit which would create a circular dependency with gst1-plugins-bad. Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Signed-off-by:
-
Fabrice Fontaine authored
zlib is an optional dependency since bump to version 7.60 in commit c4faf1d4 and https://github.com/nmap/nmap/commit/0c142333bb356b6ff15fff5c95522c4cfc410a9c. If it is not disabled, nmap will build its own zlib version which can result in the following build failure: /home/giuliobenetti/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: attempted static link of dynamic object `libz.so.1.2.11' Fixes: - http://autobuild.buildroot.org/results/da9469e24390c94fe74f133152dc320c21872159 - http://autobuild.buildroot.org/results/53034d8dd506bc033dc92343f9a37cd4ac8b2142 Signed-off-by:
-
Giulio Benetti authored
Bump version to 0.16.0 Signed-off-by:
Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by:
-
Giulio Benetti authored
Make hash tabs double spaces according to Buildroot .hash files style. Signed-off-by:
-
Giulio Benetti authored
Signed-off-by:
-
Lang Daniel authored
Sadly the most recent version of Microchip's SAM-BA programming tool is no longer hosted on GitHub. Therefore the package is downloaded from Microchip directly. Signed-off-by:
Daniel Lang <d.lang@abatec.at> Signed-off-by:
-
Giulio Benetti authored
mips_32 is not supported by ffmpeg and it tries to build with loongson3 SIMD support that leads to build failure due to: /tmp/ccFO2LRa.s: Assembler messages: /tmp/ccFO2LRa.s:15314: Error: opcode not supported on this processor: mips32 (mips32) `dmult $2,$6' /tmp/ccFO2LRa.s:15316: Error: opcode not supported on this processor: mips32 (mips32) `dsrl $2,$2,32' So let's --disable-asm to prevent using those unsupported opcodes for every mips architecture according to Arnout. Fixes: http://autobuild.buildroot.net/results/f01/f01d9cedec8e1b371308d0f7af561a75883fa27c/ Signed-off-by:
-
Edgar Bonet authored
Compiling on Ubuntu 20.04 generates this: ./util.c: In function ‘file_write_dep’ ./util.c:54:18: warning: ‘..config.tmp’ directive writing 12 bytes into a region of size between 1 and 4097 [-Wformat-overflow=] 54 | sprintf(buf, "%s..config.tmp", dir); | ^~~~~~~~~~~~ ./util.c:54:2: note: ‘sprintf’ output between 13 and 4109 bytes into a destination of size 4097 54 | sprintf(buf, "%s..config.tmp", dir); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and similar warnings on confdata.c, lines 778, 989, 995, 1000, 1007, 1040, 1046 and 1054. Avoid the warnings by enlarging the destination buffer of fprintf(). Normally, we want changes to kconfig to be reflected by patches in support/kconfig/patches. This makes it easier to resync with upstream kconfig. However, in this case, everything that is changed here is already changed completely (and differently) upstream, so there is no added value in keeping the patch. Signed-off-by: -
José Pekkarinen authored
wpa_supplicant defconfig doesn't enable CONFIG_MESH by default, and currently there is only a path to disable it in buildroot. This patch will restore the logic to enable it. Signed-off-by:
José Pekkarinen <jose.pekkarinen@unikie.com> Tested-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Acked-by:
-
Chris Packham authored
Update to syslog-ng-3.34.1. Drop patch that has been applied upstream. Update version in config file. Signed-off-by:
Chris Packham <judge.packham@gmail.com> Signed-off-by:
-
- Oct 05, 2021
-
-
Ash Charles authored
Update to the latest version of the PRU software support [1]. Compared with v5.8.0, there aren't code or license changes, just some extra release notes. [1] https://git.ti.com/cgit/pru-software-support-package/pru-software-support-package Signed-off-by:
Ash Charles <ashcharles@gmail.com> Signed-off-by:
-
Francois Perrad authored
diff LICENSE: -Copyright (c) 1997-2020 University of Cambridge +Copyright (c) 1997-2021 University of Cambridge -Copyright(c) 2010-2020 Zoltan Herczeg +Copyright(c) 2010-2021 Zoltan Herczeg Signed-off-by:
Francois Perrad <francois.perrad@gadz.org> Signed-off-by:
-
Francois Perrad authored
Signed-off-by:
-
Giulio Benetti authored
Disable dc3dd on arc like we've done for riscv32 because of the size of time_t: In file included from getdate.y:40: verify.h:132:30: error: negative width in bit-field 'verify_error_if_negative_size__' 132 | (struct { unsigned int verify_error_if_negative_size__: (R) ? 1 : -1; })) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ verify.h:138:61: note: in expansion of macro 'verify_true' 138 | # define verify(R) extern int (* verify_function__ (void)) [verify_true (R)] | ^~~~~~~~~~~ getdate.y:116:1: note: in expansion of macro 'verify' 116 | verify (LONG_MIN <= TYPE_MINIMUM (time_t) && TYPE_MAXIMUM (time_t) <= LONG_MAX); | ^~~~~~ Fixes: http://autobuild.buildroot.net/results/9e2/9e2a8f0548ecb5ce9539eda007cd886ddea7dc0a/ Signed-off-by: -
Francois Perrad authored
Signed-off-by:
-
Raphaël Mélotte authored
With some toolchains (e.g. mips64el), partial linking fails in the following way: /tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: build/release/libmupdf.a(Dingbats.cff.o): ABI is incompatible with that of the selected emulation /tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: failed to merge target specific data of file build/release/libmupdf.a(Dingbats.cff.o) Taking inspiration from commit 9eca4b9f, fix it by using GCC instead of LD for partial linking. Note that on mips the build will now produce warnings similar to this one: buildroot/output/host/lib/gcc/mips64el-buildroot-linux-gnu/10.3.0/../../../../mips64el-buildroot-linux-gnu/bin/ld: build/release/libmupdf.a(NotoSansTaiTham-Regular.ttf.o): warning: linking abicalls files with non-abicalls files During a runtime test on mips64el under qemu, mupdf-x11 was nonetheless able to display a sample PDF file correctly. Fixes: - http://autobuild.buildroot.net/results/156fe9ee5f6dccdc98990f6c5de5562383bc2b74/ Signed-off-by:
Raphaël Mélotte <raphael.melotte@mind.be> Signed-off-by:
-
Fabrice Fontaine authored
https://lists.gnu.org/archive/html/bug-wget/2021-09/msg00005.html Signed-off-by:
-
Fabrice Fontaine authored
Update indentation in hash file (two spaces) https://git.savannah.gnu.org/cgit/autoconf-archive.git/tree/NEWS?h=v2021.02.19 Signed-off-by:
-
Fabrice Fontaine authored
Update indentation in hash file (two spaces) https://git.savannah.gnu.org/cgit/automake.git/tree/NEWS?h=v1.16.4 Signed-off-by:
-
Fabrice Fontaine authored
- Update hash of license files due to links being updated: http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=61024bf52ba8a58f8992490134280eb9575e2525 - Update indentation in hash file (two spaces) https://git.savannah.gnu.org/cgit/autoconf.git/tree/NEWS?h=v2.71 Signed-off-by:
-
Asaf Kahlon authored
The package doesn't support python2 anymore. Signed-off-by:
Asaf Kahlon <asafka7@gmail.com> Signed-off-by:
-
Asaf Kahlon authored
Plus, indent with two spaces in the hash file. Signed-off-by:
-
Asaf Kahlon authored
And correct the URL in Config.in. Signed-off-by:
-
Asaf Kahlon authored
Plus, indent with two spaces in the hash file. Signed-off-by:
-
Asaf Kahlon authored
The package doesn't support python2 anymore. Signed-off-by:
-
Asaf Kahlon authored
The pacakge doesn't support python2 anymore. Therefore, we can remove host-python3-decorator and add a host variant for python-decorator. As a consequence of that, the python-networkx dependency was renamed from host-python3-decorator to host-python-decorator. In addition, indent with two spaces in the hash file. Signed-off-by:
-
Asaf Kahlon authored
* The package doesn't support python2 anymore. * Hence, python-simplelogging now depends on python3. * License was updated with a year bump. Signed-off-by:
-
Asaf Kahlon authored
Plus, indent with two spaces in the hash file. Signed-off-by:
-
Asaf Kahlon authored
* The package doesn't support python2 anymore. * Sort select alphabetically. Signed-off-by:
-
