Newer
Older
[](https://scan.coverity.com/projects/intel-ipsec-mb)
# Intel(R) Multi-Buffer Crypto for IPsec Library
The library provides software crypto acceleration primarily targeting packet processing
applications. It can be used for application such as: IPsec, TLS, Wireless (RAN), Cable or MPEG DRM.
The library is hosted on [GitHub](https://github.com/intel/intel-ipsec-mb) and is used as software crypto
provider in [DPDK](https://www.dpdk.org/), [Intel(R) QAT Engine](https://github.com/intel/QAT_Engine)
and [FD.io](https://fd.io/).
Using crypto interfaces from the above frameworks gives freedom to change providers
without subsequent application modifications. The library can also be used directly
through its native API.
Key differentiating features:
- operation chaining (encryption and authentication)
- advanced cryptographic pipelining
- job manager with scheduling and dispatching functions
- API hides underlying implementation details from an application
- multi-buffer and function stitching innovations
- low level implementations using latest instruction extensions
Contents
========
1. Overview
2. Processor Extensions
3. Recommendations
4. Package Content
5. Documentation
6. Compilation
7. Security Considerations & Options for Increased Security
8. Installation
9. Backwards compatibility
10. Disclaimer (ZUC, KASUMI, SNOW3G)
11. Legal Disclaimer
1\. Overview
============
Intel Multi-Buffer Crypto for IPsec Library is highly-optimized software
implementations of the core cryptographic processing for IPsec,
which provides industry-leading performance on a range of Intel(R) Processors.
For information on how the library works, see the Intel White Paper:
"Fast Multi-buffer IPsec Implementations on Intel Architecture Processors".
Jim Guilford, Sean Gulley, et. al.
The easiest way to find it is to search the Internet for the title and
Intel White Paper.
Table 1. List of supported cipher algorithms and their implementations.
```
+----------------------------------------------------------------------+
| | Implementation |
| Encryption +-----------------------------------------------------|
| | x86_64 | SSE | AVX | AVX2 | AVX512 | VAES(5)|
|----------------+--------+--------+--------+--------+--------+--------|
| AES128-GCM | N | Y by8 | N | Y by8 | Y by8 | Y by32 |
| AES192-GCM | N | Y by8 | N | Y by8 | Y by8 | Y by32 |
| AES256-GCM | N | Y by8 | N | Y by8 | Y by8 | Y by32 |
| AES128-CCM | N | Y by8 | Y by8 | N | N | Y by16 |
| AES256-CCM | N | Y by8 | Y by8 | N | N | Y by16 |
| AES128-CBC | N | Y(1) | Y(3) | N | N | Y(6) |
| AES192-CBC | N | Y(1) | Y(3) | N | N | Y(6) |
| AES256-CBC | N | Y(1) | Y(3) | N | N | Y(6) |
| AES128-CTR | N | Y by8 | Y by8 | N | N | Y by16 |
| AES192-CTR | N | Y by8 | Y by8 | N | N | Y by16 |
| AES256-CTR | N | Y by8 | Y by8 | N | N | Y by16 |
| AES128-ECB | N | Y(1) | Y by8 | Y(10) | N | Y by16 |
| AES192-ECB | N | Y(1) | Y by8 | Y(10) | N | Y by16 |
| AES256-ECB | N | Y(1) | Y by8 | Y(10) | N | Y by16 |
| NULL | Y | N | N | N | N | N |
| AES128-DOCSIS | N | Y(2) | Y(4) | N | Y(7) | Y(8) |
| AES256-DOCSIS | N | Y(2) | Y(4) | N | Y(7) | Y(8) |
| DES-DOCSIS | Y | N | N | N | Y x16 | N |
| 3DES | Y | N | N | N | Y x16 | N |
| DES | Y | N | N | N | Y x16 | N |
| KASUMI-F8 | Y | N | N | N | N | N |
| ZUC-EEA3 | N | Y x4 | Y x4 | Y x8 | Y x16 | Y x16 |
| ZUC-EEA3-256 | N | Y x4 | Y x4 | Y x8 | Y x16 | Y x16 |
| SNOW3G-UEA2 | N | Y x4 | Y | Y | Y x16 | Y x16 |
| AES128-CBCS(9) | N | Y(1) | Y(3) | N | N | Y(6) |
| Chacha20 | N | Y | Y | Y | Y | N |
| Chacha20 AEAD | N | Y | Y | Y | Y | N |
| SNOW-V | N | Y | Y | N | N | N |
| SNOW-V AEAD | N | Y | Y | N | N | N |
| PON-CRC-BIP | N | Y by8 | Y by8 | N | N | Y |
+----------------------------------------------------------------------+
(1,2) - By default, decryption is by4 and encryption is x4.
On CPU's supporting GFNI, decryption is by8 and encryption is x8.
(5) - AVX512 plus VAES, VPCLMULQDQ and GFNI extensions
(7) - same as AES128-CBC for AVX, combines cipher and CRC32
(8) - decryption is by16 and encryption is x16
(9) - currently 1:9 crypt:skip pattern supported
(10) - by default, decryption and encryption are AVX by8.
On CPUs supporting VAES, decryption and encryption are AVX2-VAES by16.
Legend:
` byY` - single buffer Y blocks at a time
` xY` - Y buffers at a time
As an example of how to read table 1 and 2, if one uses AVX512 interface
to perform AES128-CBC encryption then there is no native AVX512
implementation for this cipher. In such case, the library uses best
available implementation which is AVX for AES128-CBC.
Table 2. List of supported integrity algorithms and their implementations.
```
+-------------------------------------------------------------------------+
| | Implementation |
| Integrity +-----------------------------------------------------|
| | x86_64 | SSE | AVX | AVX2 | AVX512 | VAES(3)|
|-------------------+--------+--------+--------+--------+--------+--------|
| AES-XCBC-96 | N | Y x4 | Y x8 | N | N | Y x16 |
| HMAC-MD5-96 | Y(1) | Y x4x2 | Y x4x2 | Y x8x2 | N | N |
| HMAC-SHA1-96 | N | Y(2)x4 | Y x4 | Y x8 | Y x16 | N |
| HMAC-SHA2-224_112 | N | Y(2)x4 | Y x4 | Y x8 | Y x16 | N |
| HMAC-SHA2-256_128 | N | Y(2)x4 | Y x4 | Y x8 | Y x16 | N |
| HMAC-SHA2-384_192 | N | Y x2 | Y x2 | Y x4 | Y x8 | N |
| HMAC-SHA2-512_256 | N | Y x2 | Y x2 | Y x4 | Y x8 | N |
| SHA1 | N | Y(2)x4 | Y x4 | Y x8 | Y x16 | N |
| SHA2-224 | N | Y(2)x4 | Y x4 | Y x8 | Y x16 | N |
| SHA2-256 | N | Y(2)x4 | Y x4 | Y x8 | Y x16 | N |
| SHA2-384 | N | Y x2 | Y x2 | Y x4 | Y x8 | N |
| SHA2-512 | N | Y x2 | Y x2 | Y x4 | Y x8 | N |
| AES128-GMAC | N | Y by8 | N | Y by8 | Y by8 | Y by32 |
| AES192-GMAC | N | Y by8 | N | Y by8 | Y by8 | Y by32 |
| AES256-GMAC | N | Y by8 | N | Y by8 | Y by8 | Y by32 |
| AES128-CCM | N | Y(5)x4 | Y x8 | N | N | Y x16 |
| AES256-CCM | N | Y(5)x4 | Y x8 | N | N | Y x16 |
| AES128-CMAC-96 | Y | Y(5)x4 | Y x8 | N | N | Y x16 |
| AES256-CMAC-96 | Y | Y(5)x4 | Y x8 | N | N | Y x16 |
| ZUC-EIA3 | N | Y x4 | Y x4 | Y x8 | Y x16 | Y x16 |
| ZUC-EIA3-256 | N | Y x4 | Y x4 | Y x8 | Y x16 | Y x16 |
| SNOW3G-UIA2(8) | N | Y by4 | Y by4 | N | Y by32 | Y by32 |
| DOCSIS-CRC32(4) | N | Y | Y | N | Y | Y |
| HEC | N | Y | Y | N | N | N |
| POLY1305 | Y | N | N | Y(9) | Y | Y |
| POLY1305 AEAD | Y | N | N | Y(9) | Y | Y |
| SNOW-V AEAD | N | Y by8 | Y by8 | Y by8 | Y by8 | Y by32 |
| GHASH | N | Y by8 | N | Y by8 | Y by8 | Y by32 |
| CRC(6) | N | Y by8 | Y by8 | N | N | Y by16 |
| PON-CRC-BIP(7) | N | Y | Y | N | N | Y |
+-------------------------------------------------------------------------+
```
Notes:
(1) - MD5 over one block implemented in C
(2) - Implementation using SHANI extensions is x2
(3) - AVX512 plus VAES, VPCLMULQDQ, GFNI and IFMA extensions
(4) - used only with AES256-DOCSIS and AES128-DOCSIS ciphers
(5) - x8 on selected CPU's supporting GFNI
- CRC32: Ethernet FCS, SCTP, WIMAX OFDMA
- CRC24: LTE A, LTE B
- CRC16: X25, FP data
- CRC11: FP header
- CRC10: IUUP data
- CRC8: WIMAX OFDMA HCS
- CRC7: FP header
- CRC6: IUUP header
(7) - used only with PON-AES128-CTR cipher
(8) - x4/x16 for init keystream generation, then by4/by32
(9) - Only if AVX-IFMA instructions are supported
Legend:
` byY`- single buffer Y blocks at a time
` xY`- Y buffers at a time
Table 3. Encryption and integrity algorithm combinations
```
+---------------------------------------------------------------------+
| Encryption | Allowed Integrity Algorithms |
|---------------+-----------------------------------------------------|
| AES128-GCM | AES128-GMAC |
|---------------+-----------------------------------------------------|
| AES192-GCM | AES192-GMAC |
|---------------+-----------------------------------------------------|
| AES256-GCM | AES256-GMAC |
|---------------+-----------------------------------------------------|
| AES128-CCM | AES128-CCM |
|---------------+-----------------------------------------------------|
| AES256-CCM | AES256-CCM |
|---------------+-----------------------------------------------------|
| AES128-CBC, | AES-XCBC-96, |
| AES192-CBC, | HMAC-SHA1-96, HMAC-SHA2-224_112, HMAC-SHA2-256_128, |
| AES256-CBC, | HMAC-SHA2-384_192, HMAC-SHA2-512_256, |
| AES128-CTR, | AES128-CMAC-96, |
| AES192-CTR, | NULL, |
| AES256-CTR, | KASUMI-F9, |
| AES192-ECB, | SNOW3G-UIA3, |
| AES256-ECB, | POLY1305, |
| NULL, | AES128-GMAC, AES192-GMAC, AES256-GMAC, GHASH |
| DES-DOCSIS, | |
| 3DES, | |
| DES, | |
| KASUMI-F8, | |
| ZUC-EEA3, | |
| SNOW3G-UEA3 | |
|---------------+-----------------------------------------------------|
| AES128-DOCSIS,| DOCSIS-CRC32 |
| AES256-DOCSIS | |
|---------------+-----------------------------------------------------|
| PON-AES128-CTR| PON-CRC-BIP |
|---------------+-----------------------------------------------------|
| CHACHA20 AEAD | POLY1305 AEAD |
+---------------+-----------------------------------------------------+
| SNOW-V AEAD | SNOW-V AEAD (GHASH) |
+---------------+-----------------------------------------------------+
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
```
2\. Processor Extensions
========================
Table 4. Processor extensions used in the library
```
+-------------------------------------------------------------------------+
| Algorithm | Interface | Extensions |
|-------------------+-----------+-----------------------------------------|
| HMAC-SHA1-96, | AVX512 | AVX512F, AVX512BW, AVX512VL |
| HMAC-SHA2-224_112,| | |
| HMAC-SHA2-256_128,| | |
| HMAC-SHA2-384_192,| | |
| HMAC-SHA2-512_256 | | |
|-------------------+-----------+-----------------------------------------|
| DES, 3DES, | AVX512 | AVX512F, AVX512BW |
| DOCSIS-DES | | |
|-------------------+-----------+-----------------------------------------|
| HMAC-SHA1-96, | SSE | SHANI |
| HMAC-SHA2-224_112,| | - presence is autodetected and library |
| HMAC-SHA2-256_128,| | falls back to SSE implementation |
| HMAC-SHA2-384_192,| | if not present |
| HMAC-SHA2-512_256 | | |
+-------------------+-----------+-----------------------------------------+
```
3\. Recommendations
===================
Legacy or to be avoided algorithms listed in the table below are implemented
in the library in order to support legacy applications. Please use corresponding
alternative algorithms instead.
```
+--------------------------------------------------------------+
| # | Algorithm | Recommendation | Alternative |
|---+---------------------+----------------+-------------------|
| 1 | DES encryption | Avoid | AES encryption |
|---+---------------------+----------------+-------------------|
| 2 | 3DES encryption | Avoid | AES encryption |
|---+---------------------+----------------+-------------------|
| 3 | HMAC-MD5 integrity | Legacy | HMAC-SHA256 |
|---+---------------------+----------------+-------------------|
| 4 | AES-ECB encryption | Avoid | AES-CBC, AES-CNTR |
|---+---------------------+----------------+-------------------|
| 3 | HMAC-SHA1 integrity | Avoid | HMAC-SHA256 |
+--------------------------------------------------------------+
```
Intel(R) Multi-Buffer Crypto for IPsec Library depends on C library and
it is recommended to use its latest version.
Applications using the Intel(R) Multi-Buffer Crypto for IPsec Library rely on
Operating System to provide process isolation.
As the result, it is recommended to use latest Operating System patches and
security updates.
4\. Package Content
===================
- test - Library test applications
- perf - Library performance application
- lib - Library source files
- lib/sse - Intel(R) SSE optimized routines
- lib/avx - Intel(R) AVX optimized routines
- lib/avx2 - Intel(R) AVX2 optimized routines
- lib/avx512 - Intel(R) AVX512 optimized routines
- lib/no-aesni - Non-AESNI accelerated routines
**Note:**
There is just one branch used in the project. All development is done on the master branch.
Code taken from the tip of the master branch should not be considered fit for production.
Refer to the releases tab for stable code versions:
https://github.com/intel/intel-ipsec-mb/releases
5\. Documentation
===============
Full documentation can be found at: https://intel.github.io/intel-ipsec-mb
To generate documentation locally, run:
`> make doxy`
===============
Linux (64-bit only)
-------------------
Required tools:
- GNU make
- NASM version 2.14 (or newer)
- gcc (GCC) 4.8.3 (or newer)
Shared library:
`> make`
Static library:
`> make SHARED=n`
Clean the build:
`> make clean`
or
`> make clean SHARED=n`
Build with debugging information:
`> make DEBUG=y`
Build with AESNI emulation support (disabled by default):
`> make AESNI_EMU=y`
**Note:** Building with debugging information is not advised for production use.
For more build options and their explanation run:
`> make help`
- Microsoft (R) Visual Studio 2019:
- NMAKE: Microsoft (R) Program Maintenance Utility Version 14.29.30148.0
- CL: Microsoft (R) C/C++ Optimizing Compiler Version 19.29.30148 for x64
- LIB: Microsoft (R) Library Manager Version 14.29.30148.0
- LINK: Microsoft (R) Incremental Linker Version 14.29.30148.0
- Note: Building on later versions should work but is not verified
- NASM version 2.14 (or newer)
Shared library (DLL):
`> nmake /f win_x64.mak`
Static library:
`> nmake /f win_x64.mak SHARED=n`
Clean the build:
`> nmake /f win_x64.mak clean`
or
`> nmake /f win_x64.mak clean SHARED=n`
Build without safety features:
- SAFE_DATA clears sensitive information stored temporarily on stack, registers or internal data structures
- SAFE_PARAM adds extra checks on input parameters
- SAFE_LOOKUP uses constant-time lookups (enabled by default)
- SAFE_OPTIONS additional option to disable all safe options. Enabled by default.
Disable to turn off: SAFE_DATA, SAFE_PARAM and SAFE_LOOKUP.
`> nmake /f win_x64.mak SAFE_DATA=n SAFE_PARAM=n`
Build with debugging information:
`> nmake /f win_x64.mak DEBUG=y`
Build with AESNI emulation support (disabled by default):
`> nmake /f win_x64.mak AESNI_EMU=y`
**Note:** Building with debugging information is not advised for production use.
For more build options and their explanation run:
`> nmake /f win_x64.mak help`
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
Windows Mingw-w64 (64-bit only)
-------------------
Required tools:
- GNU mingw32-make.exe
- NASM version 2.14 (or newer)
- gcc (GCC) 10.3.0 (or newer)
Shared library:
`> mingw32-make.exe`
Static library:
`> mingw32-make.exe SHARED=n`
Clean the build:
`> mingw32-make.exe clean`
or
`> mingw32-make.exe clean SHARED=n`
Build with debugging information:
`> mingw32-make.exe DEBUG=y`
**Note:** Building with debugging information is not advised for production use.
For more build options and their explanation run:
`> mingw32-make.exe help`
- NASM version 2.14 (or newer)
- gcc (GCC) 4.8.3 (or newer) / clang 5.0 (or newer)
Shared library:
`> gmake`
Static library:
`> gmake SHARED=n`
Clean the build:
`> gmake clean`
or
`> gmake clean SHARED=n`
Build with debugging information:
`> gmake DEBUG=y`
**Note:** Building with debugging information is not advised for production use.
For more build options and their explanation run:
`> gmake help`
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
Building with CMake (experimental)
-------------------
Minimum CMake version:
- 3.16
Create build directory:
```
mkdir build
cd build
```
### Unix Makefiles (Linux and FreeBSD)
Shared library (default):
```
cmake ..
cmake --build . --parallel
```
Static library:
```
cmake -DBUILD_SHARED_LIBS=OFF ..
cmake --build . --parallel
```
Debug build:
```
cmake -DCMAKE_BUILD_TYPE=Debug ..
cmake --build . --parallel
```
For more build options and their explanation run:
```
cmake --build . --target print_help
```
### Windows MSVS (x64 only)
Shared library with debugging information (default for MSVS)
```
cmake -Ax64 ..
cmake --build .
```
Release build:
```
cmake -Ax64 ..
cmake --build . --config Release
```
Static library:
```
cmake -Ax64 -DBUILD_SHARED_LIBS=OFF ..
cmake --build . --config Release
```
For more build options and their explanation run:
```
cmake --build . --target print_help
```
### Ninja (Linux, FreeBSD and Windows):
```
cmake -G Ninja ..
cmake --build .
```
For more build options and their explanation run:
```
cmake --build . --target print_help
```
Library and applications can be found in:
```
build/lib
build/test
build/perf
```
7\. Security Considerations & Options for Increased Security
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
============================================================
### Security Considerations
The security of a system that uses cryptography depends on the strength of
the cryptographic algorithms as well as the strength of the keys.
Cryptographic key strength is dependent on several factors, with some of the
most important factors including the length of the key, the entropy of the key
bits, and maintaining the secrecy of the key.
The selection of an appropriate algorithm and mode of operation critically
affects the security of a system. Appropriate selection criteria is beyond the
scope of this document and should be determined based upon usage, appropriate
standards and consultation with a cryptographic expert. This library includes some
algorithms, which are considered cryptographically weak and are included only
for legacy and interoperability reasons. See the "Recommendations" section for
more details.
Secure creation of key material is not a part of this library. This library
assumes that cryptographic keys have been created using approved methods with
an appropriate and secure entropy source. Users of this library are
referred to NIST SP800-133 Revision 1, Recommendation for Cryptographic Key
Generation, found at https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-133r1.pdf
Even with the use of strong cryptographic algorithms and robustly generated
keys, software implementations of cryptographic algorithms may be attacked
at the implementation through cache-timing attacks, buffer-over-reads, and
other software vulnerabilities. Counter-measures against these types of
attacks are possible but require additional processing cycles. Whether a
particular system should provide such counter-measures depends on the threats
to that system, and cannot be determined by a general library such as this
one. In order to provide the most flexible implementation, this library allows
certain counter-measures to be enabled or disabled at compile time. These
options are listed below as the "Options for Increased Security" and are
enabled through various build flags.
### Options for Increased Security
There are three build options that are used to increase safety in
the code and help protect external functions from incorrect input data.
The SAFE_DATA, SAFE_PARAM and SAFE_LOOKUP options are enabled by default.
Due to the potential performance impact associated to the extra code, these
can be disabled by setting the parameter equal to "n" (e.g. make SAFE_LOOKUP=n).
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
No specific code has been added, and no specific validation or security
tests have been performed to help protect against or check for side-channel
attacks.
### SAFE_DATA
Stack and registers containing sensitive information, such as keys or IVs, are
cleared upon completion of a function call.
### SAFE_PARAM
Input parameters are checked, looking generally for NULL pointers or an
incorrect input length.
### SAFE_LOOKUP
Lookups which depend on sensitive information are implemented with constant
time functions.
Algorithms where these constant time functions are used are the following:
- AESNI emulation
- DES: SSE, AVX and AVX2 implementations
- KASUMI: all architectures
- SNOW3G: all architectures
If SAFE_LOOKUP is not enabled in the build (e.g. make SAFE_LOOKUP=n) then the
algorithms listed above may be susceptible to timing attacks which could expose
the cryptographic key.
SAFE_OPTIONS is a parameter that can be used to disable/enable
all supported safe options (i.e. SAFE_DATA, SAFE_PARAM, SAFE_LOOKUP).
It is set to `y` by default and all safe options are enabled.
`SAFE_OPTIONS=n` disables all safe options.
### Security API
**Force clearing/zeroing of memory**
```c
IMB_DLL_EXPORT void imb_clear_mem(void *mem, const size_t size);
```
To assist in clearing sensitive application data such as keys, plaintext etc.
the library provides the `imb_clear_mem()` API. This API zeros _'size'_ bytes
of memory pointed to by _'mem'_ followed by the _sfence_ instruction to
ensure memory is cleared before the function returns.
### Galois Counter Mode (GCM) TAG Size
The library GCM and GMAC implementation provides flexibility as to tag size selection.
As explained in [NIST Special Publication 800-38D](https://csrc.nist.gov/publications/detail/sp/800-38d/final) section 5.2.1.2 and Appendix C, using tag sizes shorter than 96 bits can be insecure.
Please refer to the aforementioned sections to understand the details, trade offs and mitigations of using shorter tag sizes.
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
================
Linux (64-bit only)
-------------------
First compile the library and then install:
`> make`
`> sudo make install`
To uninstall the library run:
`> sudo make uninstall`
If you want to change install location then define PREFIX:
`> sudo make install PREFIX=<path>`
If there is no need to run ldconfig at install stage please use NOLDCONFIG=y option:
`> sudo make install NOLDCONFIG=y`
If library was compiled as an archive (not a default option) then install it using SHARED=n option:
`> sudo make install SHARED=n`
Windows (x64 only)
------------------
First compile the library and then install from a command prompt in administrator mode:
`> nmake /f win_x64.mak`
`> nmake /f win_x64.mak install`
To uninstall the library run:
`> nmake /f win_x64.mak uninstall`
If you want to change install location then define PREFIX (default C:\Program Files):
`> nmake /f win_x64.mak install PREFIX=<path>`
If library was compiled as a static library (not a default option) then install it using SHARED=n option:
`> nmake /f win_x64.mak install SHARED=n`
FreeBSD (64-bit only)
-------------------
First compile the library and then install:
`> gmake`
`> sudo gmake install`
To uninstall the library run:
`> sudo gmake uninstall`
If you want to change install location then define PREFIX:
`> sudo gmake install PREFIX=<path>`
If there is no need to run ldconfig at install stage please use NOLDCONFIG=y option:
`> sudo gmake install NOLDCONFIG=y`
If library was compiled as an archive (not a default option) then install it using SHARED=n option:
`> sudo gmake install SHARED=n`
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
Installing with CMake (experimental)
-------------------
### Unix (Linux and FreeBSD)
First compile the library and then install:
```
cmake --build .
sudo cmake --install .
```
To uninstall the library run:
`sudo cmake --build . --target uninstall`
If you want to change install location then define PREFIX:
`sudo cmake --install . --prefix=<path>`
### Windows (x64 only)
First compile the library and then install from a command prompt in administrator mode:
```
cmake --build . --config Release
cmake --install . --config Release
```
To uninstall the library run:
`cmake --build . --target uninstall`
If you want to change install location then define PREFIX (default C:\Program Files):
`cmake --install . --config Release --prefix=<path>`
===========================
In version 0.54, some symbols have been renamed to avoid too generic names (such as cipher modes or
hash algorithms).
When building an application and linking it against the IPSec Multi Buffer library,
by default the old symbols (up to v0.53) are exported, to maintain backwards compatibility.
Applications should move to the new API as soon as possible, as the old symbols
are marked as deprecated and will be removed in a future release.
For applications which face symbol conflicts due to these old generic names,
they should be compiled with the flag -DNO_COMPAT_IMB_API_053, which will
not export the old symbols.
10\. Disclaimer (ZUC, KASUMI, SNOW3G)
====================================
Please note that cryptographic material, such as ciphering algorithms, may be
subject to national regulations. What is more, use of some algorithms in
real networks and production equipment can be subject to agreement or
licensing by the GSMA and/or the ETSI.
For more details please see:
- GSMA https://www.gsma.com/security/security-algorithms/
- ETSI https://www.etsi.org/security-algorithms-and-codes/cellular-algorithm-licences
====================
THIS SOFTWARE IS PROVIDED BY INTEL"AS IS". NO LICENSE, EXPRESS OR
IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS
ARE GRANTED THROUGH USE. EXCEPT AS PROVIDED IN INTEL'S TERMS AND
CONDITIONS OF SALE, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR
USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO
FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
12\. FIPS Compliance
===================
The library does not fulfill technical requirements to achieve Cryptographic Module (CMVP) certification as a standalone component. It is fit for Cryptographic Algorithm validation and certification (CAVP) and it can be part of CMVP as one of the components.
### CAVP
ACVP test application located in `test` directory is to support CAVP process. It implements validation of the following algorithms:
- AES-GCM
- AES-GMAC
- AES-CCM
- AES-CBC
- AES-CTR
- AES-CMAC
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
- SHA1 (SHA-1)
- SHA224 (SHA2-224)
- SHA256 (SHA2-256)
- SHA384 (SHA2-384)
- SHA512 (SHA2-512)
- HMAC-SHA1 (HMAC-SHA-1)
- HMAC-SHA224 (HMAC-SHA2-224)
- HMAC-SHA256 (HMAC-SHA2-256)
- HMAC-SHA384 (HMAC-SHA2-384)
- HMAC-SHA512 (HMAC-SHA2-512)
### CAVP Algorithm Parameters
**Note:** all sizes in bits
```
+--------------------------------------------------------------------------------------------+
| Algorithm | Standard | Parameters |
|---------------------+-----------+----------------------------------------------------------|
| AES-GCM | SP800-38D | Key size: 128, 192, 256 |
| | | Direction: encrypt and decrypt |
| | | ivLen: [min = 8, max = 1024, increment 8] |
| | | tagLen: 32, 64, 96, 104, 112, 120, 128 |
| | | payloadLen: [min = 0, max = 65536, increment = 8] |
| | | aadLen: [min = 0, max = 65536, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| AES-CBC | SP800-38A | Key size: 128, 192, 256 |
| | | Direction: encrypt and decrypt |
|---------------------+-----------+----------------------------------------------------------|
| AES-CTR | SP800-38A | Key size: 128, 192, 256 |
| | | Direction: encrypt and decrypt |
| | | payloadLen: [min = 8, max = 128, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| SHA1 (SHA-1) | FIPS180-4 | messageLength: [min = 0, max = 65528, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| SHA224 (SHA2-224) | FIPS180-4 | messageLength: [min = 0, max = 65528, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| SHA256 (SHA2-256) | FIPS180-4 | messageLength: [min = 0, max = 65528, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| SHA384 (SHA2-384) | FIPS180-4 | messageLength: [min = 0, max = 65528, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| SHA512 (SHA2-512) | FIPS180-4 | messageLength: [min = 0, max = 65528, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| AES-CCM | SP800-38C | Key size: 128, 256 |
| | | Direction: encrypt and decrypt |
| | | ivLen: [min = 56, max = 104, increment 8] |
| | | tagLen: 32, 48, 64, 80, 96, 112, 128 |
| | | payloadLen: [min = 0, max = 256, increment = 8] |
| | | aadLen: [min = 0, max = 368, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| AES-GMAC | SP800-38B | Key size: 128, 192, 256 |
| | | ivLen: [min = 8, max = 1024, increment 8] |
| | | tagLen: 32, 64, 96, 104, 112, 120, 128 |
| | | aadLen: [min = 0, max = 65536, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| AES-CMAC | SP800-38B | Key size: 128, 256 |
| | | msgLen: [min = 8, max = 65528, increment 8] |
| | | macLen: [min = 8, max = 128, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| HMAC-SHA1 | FIPS198-1 | keyLen: [min = 8, max = 524288, increment = 8] |
| (HMAC-SHA-1) | | macLen: [min = 32, max = 160, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| HMAC-SHA224 | FIPS198-1 | keyLen: [min = 8, max = 524288, increment = 8] |
| (HMAC-SHA2-224) | | macLen: [min = 32, max = 224, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| HMAC-SHA256 | FIPS198-1 | keyLen: [min = 8, max = 524288, increment = 8] |
| (HMAC-SHA2-256) | | macLen: [min = 32, max = 256, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| HMAC-SHA384 | FIPS198-1 | keyLen: [min = 8, max = 524288, increment = 8] |
| (HMAC-SHA2-384) | | macLen: [min = 32, max = 384, increment = 8] |
|---------------------+-----------+----------------------------------------------------------|
| HMAC-SHA512 | FIPS198-1 | keyLen: [min = 8, max = 524288, increment = 8] |
| (HMAC-SHA2-512) | | macLen: [min = 32, max = 512, increment = 8] |
+--------------------------------------------------------------------------------------------+
```
### Self-Test
In order to support CMVP, the library implements Self-Test functionality that is available with all compilation options.
The test is always performed as part of library initialization (power-up). There is no conditional self-test functionality as none of such conditions occur (i.e. pair-wise consistency test,
software/firmware load test, manual key entry test, continuous random number generator test, and
bypass test).
The self-test consists of Cryptographic algorithm test (known answer test) on following algorithms:
- AES-GCM
- AES-GMAC
- AES-CCM
- AES-CBC
- AES-CTR
- AES-CMAC
- SHA1
- SHA224
- SHA256
- SHA384
- SHA512
- HMAC-SHA1
- HMAC-SHA224
- HMAC-SHA256
- HMAC-SHA384
- HMAC-SHA512
Example detection of library self-test completion & error in the application:
```
IMB_ARCH arch;
IMB_MGR *p_mgr = alloc_mb_mgr(0);
init_mb_mgr_auto(p_mgr, &arch); /* or init_mb_mgr_sse/avx/avx2/avx512 */
Tomasz Kantecki
committed
* check for self-test presence and successful
* - requires library version v1.3 or newer
*/
Tomasz Kantecki
committed
if (p_mgr->features & IMB_FEATURE_SELF_TEST) {
/* self-test feature present */
if (p_mgr->features & IMB_FEATURE_SELF_TEST_PASS) {
printf("SELF-TEST: PASS\n");
} else {
printf("SELF-TEST: FAIL\n");
}
} else {
printf("SELF-TEST: N/A (requires library >= v1.3)\n");
Tomasz Kantecki
committed
}
/* check for initialization self-test error */
if (imb_get_errno(p_mgr) == IMB_ERR_SELFTEST) {
/* self-test error */
exit(EXIT_FAILURE);
}
13\.DLL Injection Attack
=======================
### Problem
The Windows OS has an insecure predefined search order and set of defaults when trying to locate a resource. If the resource location is not specified by the software, an attacker need only place a malicious version in one of the locations Windows will search, and it will be loaded instead. Although this weakness can occur with any resource, it is especially common with DLL files.
### Solutions
Applications using intel-ipsec-mb DLL library may need to apply one of the solutions to prevent from DLL injection attack.
Two solutions are available:
- Using a Fully Qualified Path is the most secure way to load a DLL
- Signature verification of the DLL
### Resources and Solution Details
- Security remarks section of LoadLibraryEx documentation by Microsoft: <https://docs.microsoft.com/en-us/windows/win32/api/libloaderapi/nf-libloaderapi-loadlibraryexa#security-remarks>
- Microsoft Dynamic Link Library Security article: <https://docs.microsoft.com/en-us/windows/win32/dlls/dynamic-link-library-security>
- Hijack Execution Flow: DLL Search Order Hijacking: <https://attack.mitre.org/techniques/T1574/001>
- Hijack Execution Flow: DLL Side-Loading: <https://attack.mitre.org/techniques/T1574/002>